ARM: sun7i: dtsi: add support for usbphy0

[cascardo/linux.git] / arch / arm / boot / dts / sun7i-a20.dtsi

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 82097c9..d7135f5 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -8,18 +8,18 @@
  * licensing only applies to this file, and not this project as a
  * whole.
  *
- *  a) This library is free software; you can redistribute it and/or
+ *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License as
  *     published by the Free Software Foundation; either version 2 of the
  *     License, or (at your option) any later version.
  *
- *     This library is distributed in the hope that it will be useful,
+ *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  *     You should have received a copy of the GNU General Public
- *     License along with this library; if not, write to the Free
+ *     License along with this file; if not, write to the Free
  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  *     MA 02110-1301 USA
  *
@@ -552,8 +552,8 @@
                        reg-names = "phy_ctrl", "pmu1", "pmu2";
                        clocks = <&usb_clk 8>;
                        clock-names = "usb_phy";
-                       resets = <&usb_clk 1>, <&usb_clk 2>;
-                       reset-names = "usb1_reset", "usb2_reset";
+                       resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+                       reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
                        status = "disabled";
                };
 
@@ -677,6 +677,13 @@
                                allwinner,pull = <0>;
                        };
 
+                       uart3_pins_b: uart3@1 {
+                               allwinner,pins = "PH0", "PH1";
+                               allwinner,function = "uart3";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
                        uart4_pins_a: uart4@0 {
                                allwinner,pins = "PG10", "PG11";
                                allwinner,function = "uart4";
@@ -784,6 +791,13 @@
                                allwinner,pull = <0>;
                        };
 
+                       spi0_pins_a: spi0@0 {
+                               allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14";
+                               allwinner,function = "spi0";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
                        spi1_pins_a: spi1@0 {
                                allwinner,pins = "PI16", "PI17", "PI18", "PI19";
                                allwinner,function = "spi1";
@@ -819,6 +833,13 @@
                                allwinner,pull = <1>;
                        };
 
+                       mmc2_pins_a: mmc2@0 {
+                               allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11";
+                               allwinner,function = "mmc2";
+                               allwinner,drive = <2>;
+                               allwinner,pull = <1>;
+                       };
+
                        mmc3_pins_a: mmc3@0 {
                                allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
                                allwinner,function = "mmc3";