Merge branch 'timers/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...

[cascardo/linux.git] / arch / arm / mach-at91 / Kconfig

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0fc07b6..5bad6b9 100644 (file)
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -30,6 +30,11 @@ config ARCH_AT91SAM9RL
        select GENERIC_TIME
        select GENERIC_CLOCKEVENTS
 
+config ARCH_AT91SAM9G20
+       bool "AT91SAM9G20"
+       select GENERIC_TIME
+       select GENERIC_CLOCKEVENTS
+
 config ARCH_AT91CAP9
        bool "AT91CAP9"
        select GENERIC_TIME
@@ -126,6 +131,12 @@ config MACH_ECBAT91
          Select this if you are using emQbit's ECB_AT91 board.
          <http://wiki.emqbit.com/free-ecb-at91>
 
+config MACH_YL9200
+       bool "ucDragon YL-9200"
+       depends on ARCH_AT91RM9200
+       help
+         Select this if you are using the ucDragon YL-9200 board.
+
 endif
 
 # ----------------------------------------------------------
@@ -164,6 +175,20 @@ config MACH_SAM9_L9260
          Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
          <http://www.olimex.com/dev/sam9-L9260.html>
 
+config MACH_USB_A9260
+       bool "CALAO USB-A9260"
+       depends on ARCH_AT91SAM9260
+       help
+         Select this if you are using a Calao Systems USB-A9260.
+         <http://www.calao-systems.com>
+
+config MACH_QIL_A9260
+       bool "CALAO QIL-A9260 board"
+       depends on ARCH_AT91SAM9260
+       help
+         Select this if you are using a Calao Systems QIL-A9260 Board.
+         <http://www.calao-systems.com>
+
 endif
 
 # ----------------------------------------------------------
@@ -194,6 +219,13 @@ config MACH_AT91SAM9263EK
          Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
 
+config MACH_USB_A9263
+       bool "CALAO USB-A9263"
+       depends on ARCH_AT91SAM9263
+       help
+         Select this if you are using a Calao Systems USB-A9263.
+         <http://www.calao-systems.com>
+
 endif
 
 # ----------------------------------------------------------
@@ -212,6 +244,20 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9G20
+
+comment "AT91SAM9G20 Board Type"
+
+config MACH_AT91SAM9G20EK
+       bool "Atmel AT91SAM9G20-EK Evaluation Kit"
+       depends on ARCH_AT91SAM9G20
+       help
+         Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
+
+endif
+
+# ----------------------------------------------------------
+
 if ARCH_AT91CAP9
 
 comment "AT91CAP9 Board Type"
@@ -247,13 +293,13 @@ comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
        bool "Enable DataFlash Card support"
-       depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK || MACH_SAM9_L9260 || MACH_ECBAT91)
+       depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK)
        help
          Enable support for the DataFlash card.
 
 config MTD_NAND_AT91_BUSWIDTH_16
        bool "Enable 16-bit data bus interface to NAND flash"
-       depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
+       depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
        help
          On AT91SAM926x boards both types of NAND flash can be present
          (8 and 16 bit data bus width).
@@ -302,15 +348,15 @@ config AT91_EARLY_USART2
 
 config AT91_EARLY_USART3
        bool "USART3"
-       depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260)
+       depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
 
 config AT91_EARLY_USART4
        bool "USART4"
-       depends on ARCH_AT91SAM9260
+       depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
 
 config AT91_EARLY_USART5
        bool "USART5"
-       depends on ARCH_AT91SAM9260
+       depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
 
 endchoice