Merge branches 'cleanups/assorted', 'cleanups/shawn-cleanup-mxc-gpio', 'cleanups...

[cascardo/linux.git] / arch / arm / mach-mx5 / mx51_efika.c

diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index 4d79b5e..d5bf958 100644 (file)
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -34,14 +34,12 @@
 #include <linux/usb/ulpi.h>
 #include <mach/ulpi.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 #include "efika.h"
 #include "cpu_op-mx51.h"
 
@@ -133,7 +131,7 @@ static int initialize_otg_port(struct platform_device *pdev)
        u32 v;
        void __iomem *usb_base;
        void __iomem *usbother_base;
-       usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+       usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
        if (!usb_base)
                return -ENOMEM;
        usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
@@ -150,7 +148,7 @@ static int initialize_otg_port(struct platform_device *pdev)
        return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
 }
 
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
        .init   = initialize_otg_port,
        .portsc = MXC_EHCI_UTMI_16BIT,
 };
@@ -170,7 +168,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
        gpio_set_value(EFIKAMX_USBH1_STP, 1);
        msleep(1);
 
-       usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+       usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
        socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
 
        /* The clock for the USBH1 ULPI port will come externally */
@@ -189,7 +187,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
        return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
-static struct mxc_usbh_platform_data usbh1_config = {
+static struct mxc_usbh_platform_data usbh1_config __initdata = {
        .init   = initialize_usbh1_port,
        .portsc = MXC_EHCI_MODE_ULPI,
 };
@@ -217,9 +215,9 @@ static void __init mx51_efika_usb(void)
        usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
                        ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
 
-       mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+       imx51_add_mxc_ehci_otg(&dr_utmi_config);
        if (usbh1_config.otg)
-               mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+               imx51_add_mxc_ehci_hs(1, &usbh1_config);
 }
 
 static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
@@ -631,4 +629,3 @@ void __init efika_board_common_init(void)
        get_cpu_op = mx51_get_cpu_op;
 #endif
 }
-