#include <sound/tpa6130a2-plat.h>
#include <media/radio-si4713.h>
#include <media/si4713.h>
+#include <linux/leds-lp5523.h>
#include <../drivers/staging/iio/light/tsl2563.h>
#define RX51_WL1251_IRQ_GPIO 42
#define RX51_FMTX_RESET_GPIO 163
#define RX51_FMTX_IRQ 53
+#define RX51_LP5523_CHIP_EN_GPIO 41
#define RX51_USB_TRANSCEIVER_RST_GPIO 67
};
#endif
+#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
+static struct lp5523_led_config rx51_lp5523_led_config[] = {
+ {
+ .chan_nr = 0,
+ .led_current = 50,
+ }, {
+ .chan_nr = 1,
+ .led_current = 50,
+ }, {
+ .chan_nr = 2,
+ .led_current = 50,
+ }, {
+ .chan_nr = 3,
+ .led_current = 50,
+ }, {
+ .chan_nr = 4,
+ .led_current = 50,
+ }, {
+ .chan_nr = 5,
+ .led_current = 50,
+ }, {
+ .chan_nr = 6,
+ .led_current = 50,
+ }, {
+ .chan_nr = 7,
+ .led_current = 50,
+ }, {
+ .chan_nr = 8,
+ .led_current = 50,
+ }
+};
+
+static int rx51_lp5523_setup(void)
+{
+ return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT,
+ "lp5523_enable");
+}
+
+static void rx51_lp5523_release(void)
+{
+ gpio_free(RX51_LP5523_CHIP_EN_GPIO);
+}
+
+static void rx51_lp5523_enable(bool state)
+{
+ gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state);
+}
+
+static struct lp5523_platform_data rx51_lp5523_platform_data = {
+ .led_config = rx51_lp5523_led_config,
+ .num_channels = ARRAY_SIZE(rx51_lp5523_led_config),
+ .clock_mode = LP5523_CLOCK_AUTO,
+ .setup_resources = rx51_lp5523_setup,
+ .release_resources = rx51_lp5523_release,
+ .enable = rx51_lp5523_enable,
+};
+#endif
+
static struct omap2_mcspi_device_config wl1251_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1,
.consumer_supplies = rx51_vmmc2_supplies,
};
+static struct regulator_init_data rx51_vpll1 = {
+ .constraints = {
+ .name = "VPLL",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
+static struct regulator_init_data rx51_vpll2 = {
+ .constraints = {
+ .name = "VSDI_CSI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
static struct regulator_init_data rx51_vsim = {
.constraints = {
.name = "VMMC2_IO_18",
.consumer_supplies = rx51_vio_supplies,
};
+static struct regulator_init_data rx51_vintana1 = {
+ .constraints = {
+ .name = "VINTANA1",
+ .min_uV = 1500000,
+ .max_uV = 1500000,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
+static struct regulator_init_data rx51_vintana2 = {
+ .constraints = {
+ .name = "VINTANA2",
+ .min_uV = 2750000,
+ .max_uV = 2750000,
+ .apply_uV = true,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
+static struct regulator_init_data rx51_vintdig = {
+ .constraints = {
+ .name = "VINTDIG",
+ .min_uV = 1500000,
+ .max_uV = 1500000,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = {
.gpio_reset = RX51_FMTX_RESET_GPIO,
};
.subdev_board_info = &rx51_si4713_board_info,
};
-static struct platform_device rx51_si4713_dev __initdata_or_module = {
+static struct platform_device rx51_si4713_dev = {
.name = "radio-si4713",
.id = -1,
.dev = {
.vaux2 = &rx51_vaux2,
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
+ .vpll1 = &rx51_vpll1,
+ .vpll2 = &rx51_vpll2,
.vsim = &rx51_vsim,
+ .vintana1 = &rx51_vintana1,
+ .vintana2 = &rx51_vintana2,
+ .vintdig = &rx51_vintdig,
.vio = &rx51_vio,
};
I2C_BOARD_INFO("tsl2563", 0x29),
.platform_data = &rx51_tsl2563_platform_data,
},
+#endif
+#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
+ {
+ I2C_BOARD_INFO("lp5523", 0x32),
+ .platform_data = &rx51_lp5523_platform_data,
+ },
#endif
{
I2C_BOARD_INFO("tpa6130a2", 0x60),
void __init rx51_peripherals_init(void)
{
rx51_i2c_init();
+ regulator_has_full_constraints();
gpmc_onenand_init(board_onenand_data);
board_smc91x_init();
rx51_add_gpio_keys();