Merge branch 'next/cleanup-plat-s3c24xx' into next/cleanup-plat-s3c24xx-s5p

[cascardo/linux.git] / arch / arm / plat-samsung / Kconfig

diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index a0ffc77..f8c5710 100644 (file)
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -13,6 +13,24 @@ config PLAT_SAMSUNG
        help
          Base platform code for all Samsung SoC based systems
 
+config PLAT_S5P
+       bool
+       depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+       default y
+       select ARM_VIC if !ARCH_EXYNOS
+       select ARM_GIC if ARCH_EXYNOS
+       select GIC_NON_BANKED if ARCH_EXYNOS4
+       select NO_IOPORT
+       select ARCH_REQUIRE_GPIOLIB
+       select S3C_GPIO_TRACK
+       select S5P_GPIO_DRVSTR
+       select SAMSUNG_GPIOLIB_4BIT
+       select PLAT_SAMSUNG
+       select SAMSUNG_CLKSRC
+       select SAMSUNG_IRQ_VIC_TIMER
+       help
+         Base platform code for Samsung's S5P series SoC.
+
 if PLAT_SAMSUNG
 
 # boot configurations
@@ -50,6 +68,14 @@ config S3C_LOWLEVEL_UART_PORT
          this configuration should be between zero and two. The port
          must have been initialised by the boot-loader before use.
 
+# timer options
+
+config S5P_HRT
+       bool
+       select SAMSUNG_DEV_PWM
+       help
+         Use the High Resolution timer support
+
 # clock options
 
 config SAMSUNG_CLKSRC
@@ -58,6 +84,11 @@ config SAMSUNG_CLKSRC
          Select the clock code for the clksrc implementation
          used by newer systems such as the S3C64XX.
 
+config S5P_CLOCK
+       def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+       help
+         Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs
+
 # options for IRQ support
 
 config SAMSUNG_IRQ_VIC_TIMER
@@ -65,6 +96,22 @@ config SAMSUNG_IRQ_VIC_TIMER
        help
          Internal configuration to build the VIC timer interrupt code.
 
+config S5P_IRQ
+       def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+       help
+         Support common interrup part for ARCH_S5P and ARCH_EXYNOS SoCs
+
+config S5P_EXT_INT
+       bool
+       help
+         Use the external interrupts (other than GPIO interrupts.)
+         Note: Do not choose this for S5P6440 and S5P6450.
+
+config S5P_GPIO_INT
+       bool
+       help
+         Common code for the GPIO interrupts (other than external interrupts.)
+
 # options for gpio configuration support
 
 config SAMSUNG_GPIOLIB_4BIT
@@ -117,6 +164,12 @@ config S3C_GPIO_TRACK
          Internal configuration option to enable the s3c specific gpio
          chip tracking if the platform requires it.
 
+# uart options
+
+config S5P_DEV_UART
+       def_bool y
+       depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+
 # ADC driver
 
 config S3C_ADC
@@ -274,6 +327,76 @@ config SAMSUNG_DEV_BACKLIGHT
        help
          Compile in platform device definition LCD backlight with PWM Timer
 
+config S5P_DEV_CSIS0
+       bool
+       help
+         Compile in platform device definitions for MIPI-CSIS channel 0
+
+config S5P_DEV_CSIS1
+       bool
+       help
+         Compile in platform device definitions for MIPI-CSIS channel 1
+
+config S5P_DEV_FIMC0
+       bool
+       help
+         Compile in platform device definitions for FIMC controller 0
+
+config S5P_DEV_FIMC1
+       bool
+       help
+         Compile in platform device definitions for FIMC controller 1
+
+config S5P_DEV_FIMC2
+       bool
+       help
+         Compile in platform device definitions for FIMC controller 2
+
+config S5P_DEV_FIMC3
+       bool
+       help
+         Compile in platform device definitions for FIMC controller 3
+
+config S5P_DEV_FIMD0
+       bool
+       help
+         Compile in platform device definitions for FIMD controller 0
+
+config S5P_DEV_G2D
+       bool
+       help
+         Compile in platform device definitions for G2D device
+
+config S5P_DEV_I2C_HDMIPHY
+       bool
+       help
+         Compile in platform device definitions for I2C HDMIPHY controller
+
+config S5P_DEV_JPEG
+       bool
+       help
+         Compile in platform device definitions for JPEG codec
+
+config S5P_DEV_MFC
+       bool
+       help
+         Compile in setup memory (init) code for MFC
+
+config S5P_DEV_ONENAND
+       bool
+       help
+         Compile in platform device definition for OneNAND controller
+
+config S5P_DEV_TV
+       bool
+       help
+         Compile in platform device definition for TV interface
+
+config S5P_DEV_USB_EHCI
+       bool
+       help
+         Compile in platform device definition for USB EHCI
+
 config S3C24XX_PWM
        bool "PWM device support"
        select HAVE_PWM
@@ -281,6 +404,11 @@ config S3C24XX_PWM
          Support for exporting the PWM timer blocks via the pwm device
          system
 
+config S5P_SETUP_MIPIPHY
+       bool
+       help
+         Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
+
 # DMA
 
 config S3C_DMA
@@ -351,6 +479,18 @@ config SAMSUNG_WAKEMASK
          and above. This code allows a set of interrupt to wakeup-mask
          mappings. See <plat/wakeup-mask.h>
 
+config S5P_PM
+       bool
+       help
+         Common code for power management support on S5P and newer SoCs
+         Note: Do not select this for S5P6440 and S5P6450.
+
+config S5P_SLEEP
+       bool
+       help
+         Internal config node to apply common S5P sleep management code.
+         Can be selected by S5P and newer SoCs with similar sleep procedure.
+
 comment "Power Domain"
 
 config SAMSUNG_PD