#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/hi6220-clock.h>
+#include <dt-bindings/pinctrl/hisi.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "hisilicon,hi6220";
device_type = "cpu";
reg = <0x0 0x0>;
enable-method = "psci";
+ next-level-cache = <&CLUSTER0_L2>;
+ clocks = <&stub_clock 0>;
+ operating-points-v2 = <&cpu_opp_table>;
+ cooling-min-level = <4>;
+ cooling-max-level = <0>;
+ #cooling-cells = <2>; /* min followed by max */
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ dynamic-power-coefficient = <311>;
};
cpu1: cpu@1 {
device_type = "cpu";
reg = <0x0 0x1>;
enable-method = "psci";
+ next-level-cache = <&CLUSTER0_L2>;
+ operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
device_type = "cpu";
reg = <0x0 0x2>;
enable-method = "psci";
+ next-level-cache = <&CLUSTER0_L2>;
+ operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
device_type = "cpu";
reg = <0x0 0x3>;
enable-method = "psci";
+ next-level-cache = <&CLUSTER0_L2>;
+ operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
device_type = "cpu";
reg = <0x0 0x100>;
enable-method = "psci";
+ next-level-cache = <&CLUSTER1_L2>;
+ operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
device_type = "cpu";
reg = <0x0 0x101>;
enable-method = "psci";
+ next-level-cache = <&CLUSTER1_L2>;
+ operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
device_type = "cpu";
reg = <0x0 0x102>;
enable-method = "psci";
+ next-level-cache = <&CLUSTER1_L2>;
+ operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
device_type = "cpu";
reg = <0x0 0x103>;
enable-method = "psci";
+ next-level-cache = <&CLUSTER1_L2>;
+ operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
+
+ CLUSTER0_L2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ CLUSTER1_L2: l2-cache1 {
+ compatible = "cache";
+ };
+ };
+
+ cpu_opp_table: cpu_opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <208000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <500000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <432000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <500000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <729000000>;
+ opp-microvolt = <1090000>;
+ clock-latency-ns = <500000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <960000000>;
+ opp-microvolt = <1180000>;
+ clock-latency-ns = <500000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1330000>;
+ clock-latency-ns = <500000>;
+ };
};
gic: interrupt-controller@f6801000 {
#size-cells = <2>;
ranges;
+ sram: sram@fff80000 {
+ compatible = "hisilicon,hi6220-sramctrl", "syscon";
+ reg = <0x0 0xfff80000 0x0 0x12000>;
+ };
+
ao_ctrl: ao_ctrl@f7800000 {
compatible = "hisilicon,hi6220-aoctrl", "syscon";
reg = <0x0 0xf7800000 0x0 0x2000>;
#clock-cells = <1>;
};
+ stub_clock: stub_clock {
+ compatible = "hisilicon,hi6220-stub-clk";
+ hisilicon,hi6220-clk-sram = <&sram>;
+ #clock-cells = <1>;
+ mbox-names = "mbox-tx";
+ mboxes = <&mailbox 1 0 11>;
+ };
+
uart0: uart@f8015000 { /* console */
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xf8015000 0x0 0x1000>;
clocks = <&sys_ctrl HI6220_UART1_PCLK>,
<&sys_ctrl HI6220_UART1_PCLK>;
clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func1 &uart1_cfg_func2>;
status = "disabled";
};
clocks = <&sys_ctrl HI6220_UART2_PCLK>,
<&sys_ctrl HI6220_UART2_PCLK>;
clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
status = "disabled";
};
clocks = <&sys_ctrl HI6220_UART3_PCLK>,
<&sys_ctrl HI6220_UART3_PCLK>;
clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+ status = "disabled";
};
uart4: uart@f7114000 {
clocks = <&sys_ctrl HI6220_UART4_PCLK>,
<&sys_ctrl HI6220_UART4_PCLK>;
clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
status = "disabled";
};
clock-names = "timer1", "timer2", "apb_pclk";
};
+ pmx0: pinmux@f7010000 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0xf7010000 0x0 0x27c>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #gpio-range-cells = <3>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <7>;
+ pinctrl-single,gpio-range = <
+ &range 80 8 MUX_M0 /* gpio 3: [0..7] */
+ &range 88 8 MUX_M0 /* gpio 4: [0..7] */
+ &range 96 8 MUX_M0 /* gpio 5: [0..7] */
+ &range 104 8 MUX_M0 /* gpio 6: [0..7] */
+ &range 112 8 MUX_M0 /* gpio 7: [0..7] */
+ &range 120 2 MUX_M0 /* gpio 8: [0..1] */
+ &range 2 6 MUX_M1 /* gpio 8: [2..7] */
+ &range 8 8 MUX_M1 /* gpio 9: [0..7] */
+ &range 0 1 MUX_M1 /* gpio 10: [0] */
+ &range 16 7 MUX_M1 /* gpio 10: [1..7] */
+ &range 23 3 MUX_M1 /* gpio 11: [0..2] */
+ &range 28 5 MUX_M1 /* gpio 11: [3..7] */
+ &range 33 3 MUX_M1 /* gpio 12: [0..2] */
+ &range 43 5 MUX_M1 /* gpio 12: [3..7] */
+ &range 48 8 MUX_M1 /* gpio 13: [0..7] */
+ &range 56 8 MUX_M1 /* gpio 14: [0..7] */
+ &range 74 6 MUX_M1 /* gpio 15: [0..5] */
+ &range 122 1 MUX_M1 /* gpio 15: [6] */
+ &range 126 1 MUX_M1 /* gpio 15: [7] */
+ &range 127 8 MUX_M1 /* gpio 16: [0..7] */
+ &range 135 8 MUX_M1 /* gpio 17: [0..7] */
+ &range 143 8 MUX_M1 /* gpio 18: [0..7] */
+ &range 151 8 MUX_M1 /* gpio 19: [0..7] */
+ >;
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+ };
+
+ pmx1: pinmux@f7010800 {
+ compatible = "pinconf-single";
+ reg = <0x0 0xf7010800 0x0 0x28c>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ };
+
+ pmx2: pinmux@f8001800 {
+ compatible = "pinconf-single";
+ reg = <0x0 0xf8001800 0x0 0x78>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ };
+
gpio0: gpio@f8011000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xf8011000 0x0 0x1000>;
interrupts = <0 55 0x4>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 80 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
interrupts = <0 56 0x4>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 88 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
interrupts = <0 57 0x4>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 96 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
interrupts = <0 58 0x4>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 104 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
interrupts = <0 59 0x4>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 112 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
interrupts = <0 60 0x4>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 120 2 &pmx0 2 2 6>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
interrupts = <0 61 0x4>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 8 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
interrupts = <0 62 0x4>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 0 1 &pmx0 1 16 7>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
interrupts = <0 63 0x4>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 23 3 &pmx0 3 28 5>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
interrupts = <0 64 0x4>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 33 3 &pmx0 3 43 5>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
reg = <0x0 0xf7029000 0x0 0x1000>;
interrupts = <0 65 0x4>;
gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 48 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
interrupts = <0 66 0x4>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 56 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
interrupts = <0 67 0x4>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <
+ &pmx0 0 74 6
+ &pmx0 6 122 1
+ &pmx0 7 126 1
+ >;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
interrupts = <0 68 0x4>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 127 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
interrupts = <0 69 0x4>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 135 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
interrupts = <0 70 0x4>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 143 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
interrupts = <0 71 0x4>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pmx0 0 151 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&ao_ctrl 2>;
clock-names = "apb_pclk";
};
+
+ spi0: spi@f7106000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x0 0xf7106000 0x0 0x1000>;
+ interrupts = <0 50 4>;
+ bus-id = <0>;
+ enable-dma = <0>;
+ clocks = <&sys_ctrl HI6220_SPI_CLK>;
+ clock-names = "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pmx_func &spi0_cfg_func>;
+ num-cs = <1>;
+ cs-gpios = <&gpio6 2 0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@f7100000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xf7100000 0x0 0x1000>;
+ interrupts = <0 44 4>;
+ clocks = <&sys_ctrl HI6220_I2C0_CLK>;
+ i2c-sda-hold-time-ns = <300>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@f7101000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xf7101000 0x0 0x1000>;
+ clocks = <&sys_ctrl HI6220_I2C1_CLK>;
+ interrupts = <0 45 4>;
+ i2c-sda-hold-time-ns = <300>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@f7102000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xf7102000 0x0 0x1000>;
+ clocks = <&sys_ctrl HI6220_I2C2_CLK>;
+ interrupts = <0 46 4>;
+ i2c-sda-hold-time-ns = <300>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
+ status = "disabled";
+ };
+
+ fixed_5v_hub: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed_5v_hub";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpio = <&gpio0 7 0>;
+ regulator-always-on;
+ };
+
+ usb_phy: usbphy {
+ compatible = "hisilicon,hi6220-usb-phy";
+ #phy-cells = <0>;
+ phy-supply = <&fixed_5v_hub>;
+ hisilicon,peripheral-syscon = <&sys_ctrl>;
+ };
+
+ usb: usb@f72c0000 {
+ compatible = "hisilicon,hi6220-usb";
+ reg = <0x0 0xf72c0000 0x0 0x40000>;
+ phys = <&usb_phy>;
+ phy-names = "usb2-phy";
+ clocks = <&sys_ctrl HI6220_USBOTG_HCLK>;
+ clock-names = "otg";
+ dr_mode = "otg";
+ g-use-dma;
+ g-rx-fifo-size = <512>;
+ g-np-tx-fifo-size = <128>;
+ g-tx-fifo-size = <128 128 128 128 128 128>;
+ interrupts = <0 77 0x4>;
+ };
+
+ mailbox: mailbox@f7510000 {
+ compatible = "hisilicon,hi6220-mbox";
+ reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */
+ <0x0 0x06dff800 0x0 0x0800>; /* Mailbox buffer */
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <3>;
+ };
+
+ dwmmc_0: dwmmc0@f723d000 {
+ compatible = "hisilicon,hi6220-dw-mshc";
+ num-slots = <0x1>;
+ cap-mmc-highspeed;
+ non-removable;
+ reg = <0x0 0xf723d000 0x0 0x1000>;
+ interrupts = <0x0 0x48 0x4>;
+ clocks = <&sys_ctrl 2>, <&sys_ctrl 1>;
+ clock-names = "ciu", "biu";
+ bus-width = <0x8>;
+ vmmc-supply = <&ldo19>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pmx_func &emmc_clk_cfg_func
+ &emmc_cfg_func &emmc_rst_cfg_func>;
+ };
+
+ dwmmc_1: dwmmc1@f723e000 {
+ compatible = "hisilicon,hi6220-dw-mshc";
+ num-slots = <0x1>;
+ card-detect-delay = <200>;
+ hisilicon,peripheral-syscon = <&ao_ctrl>;
+ cap-sd-highspeed;
+ reg = <0x0 0xf723e000 0x0 0x1000>;
+ interrupts = <0x0 0x49 0x4>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ clocks = <&sys_ctrl 4>, <&sys_ctrl 3>;
+ clock-names = "ciu", "biu";
+ vqmmc-supply = <&ldo7>;
+ vmmc-supply = <&ldo10>;
+ bus-width = <0x4>;
+ disable-wp;
+ cd-gpios = <&gpio1 0 1>;
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>;
+ pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>;
+ };
+
+ dwmmc_2: dwmmc2@f723f000 {
+ compatible = "hisilicon,hi6220-dw-mshc";
+ num-slots = <0x1>;
+ reg = <0x0 0xf723f000 0x0 0x1000>;
+ interrupts = <0x0 0x4a 0x4>;
+ clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>;
+ clock-names = "ciu", "biu";
+ bus-width = <0x4>;
+ broken-cd;
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&sdio_pmx_func &sdio_clk_cfg_func &sdio_cfg_func>;
+ pinctrl-1 = <&sdio_pmx_idle &sdio_clk_cfg_idle &sdio_cfg_idle>;
+ };
+
+ tsensor: tsensor@0,f7030700 {
+ compatible = "hisilicon,tsensor";
+ reg = <0x0 0xf7030700 0x0 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl 22>;
+ clock-names = "thermal_clk";
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal-zones {
+
+ cls0: cls0 {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ sustainable-power = <3326>;
+
+ /* sensor ID */
+ thermal-sensors = <&tsensor 2>;
+
+ trips {
+ threshold: trip-point@0 {
+ temperature = <65000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ target: trip-point@1 {
+ temperature = <75000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
};
};
projects / cascardo / linux.git / blobdiff