#include <asm/signal.h>
#include <asm/asm-offsets.h>
+#undef DEBUG
+
/* Helpful Macros */
#define NUM_TO_REG(num) r ## num
lwi r6, r1, PT_R6; \
lwi r11, r1, PT_R11; \
lwi r31, r1, PT_R31; \
- lwi r1, r0, TOPHYS(r0_ram + 0);
+ lwi r1, r1, PT_R1;
#endif /* CONFIG_MMU */
#define LWREG_NOP \
#if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0
#define BSRLI(rD, rA, imm) \
bsrli rD, rA, imm
- #elif CONFIG_XILINX_MICROBLAZE0_USE_DIV > 0
- #define BSRLI(rD, rA, imm) \
- ori rD, r0, (1 << imm); \
- idivu rD, rD, rA
#else
#define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA)
/* Only the used shift constants defined here - add more if needed */
* | . |
* | . |
*
- * NO_MMU kernel use the same r0_ram pointed space - look to vmlinux.lds.S
- * which is used for storing register values - old style was, that value were
+ * MMU kernel uses the same 'pt_pool_space' pointed space
+ * which is used for storing register values - noMMu style was, that values were
* stored in stack but in case of failure you lost information about register.
* Currently you can see register value in memory in specific place.
* In compare to with previous solution the speed should be the same.
*/
/* wrappers to restore state before coming to entry.S */
-
#ifdef CONFIG_MMU
+.section .data
+.align 4
+pt_pool_space:
+ .space PT_SIZE
+
+#ifdef DEBUG
+/* Create space for exception counting. */
+.section .data
+.global exception_debug_table
+.align 4
+exception_debug_table:
+ /* Look at exception vector table. There is 32 exceptions * word size */
+ .space (32 * 4)
+#endif /* DEBUG */
+
.section .rodata
.align 4
_MB_HW_ExceptionVectorTable:
#ifndef CONFIG_MMU
addik r1, r1, -(EX_HANDLER_STACK_SIZ); /* Create stack frame */
#else
- swi r1, r0, TOPHYS(r0_ram + 0); /* GET_SP */
+ swi r1, r0, TOPHYS(pt_pool_space + PT_R1); /* GET_SP */
/* Save date to kernel memory. Here is the problem
* when you came from user space */
- ori r1, r0, TOPHYS(r0_ram + 28);
+ ori r1, r0, TOPHYS(pt_pool_space);
#endif
swi r3, r1, PT_R3
swi r4, r1, PT_R4
#ifdef DEBUG
/* counting which exception happen */
- lwi r5, r0, 0x200 + TOPHYS(r0_ram)
+ lwi r5, r0, TOPHYS(exception_debug_table)
addi r5, r5, 1
- swi r5, r0, 0x200 + TOPHYS(r0_ram)
- lwi r5, r6, 0x200 + TOPHYS(r0_ram)
+ swi r5, r0, TOPHYS(exception_debug_table)
+ lwi r5, r6, TOPHYS(exception_debug_table)
addi r5, r5, 1
- swi r5, r6, 0x200 + TOPHYS(r0_ram)
+ swi r5, r6, TOPHYS(exception_debug_table)
#endif
/* end */
/* Load the HW Exception vector */