[MIPS] Replace board_timer_setup function pointer by plat_timer_setup.

[cascardo/linux.git] / arch / mips / cobalt / setup.c

diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index b9713a7..c01a017 100644 (file)
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -9,7 +9,6 @@
  * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
  *
  */
-#include <linux/config.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/init.h>
@@ -31,6 +30,7 @@
 extern void cobalt_machine_restart(char *command);
 extern void cobalt_machine_halt(void);
 extern void cobalt_machine_power_off(void);
+extern void cobalt_early_console(void);
 
 int cobalt_board_id;
 
@@ -49,7 +49,7 @@ const char *get_system_type(void)
        return "MIPS Cobalt";
 }
 
-static void __init cobalt_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
        /* Load timer value for 1KHz (TCLK is 50MHz) */
        GALILEO_OUTL(50*1000*1000 / 1000, GT_TC0_OFS);
@@ -67,19 +67,46 @@ static void __init cobalt_timer_setup(struct irqaction *irq)
 extern struct pci_ops gt64111_pci_ops;
 
 static struct resource cobalt_mem_resource = {
-       "PCI memory", GT64111_MEM_BASE, GT64111_MEM_END, IORESOURCE_MEM
+       .start  = GT64111_MEM_BASE,
+       .end    = GT64111_MEM_END,
+       .name   = "PCI memory",
+       .flags  = IORESOURCE_MEM
 };
 
 static struct resource cobalt_io_resource = {
-       "PCI I/O", 0x1000, 0xffff, IORESOURCE_IO
+       .start  = 0x1000,
+       .end    = 0xffff,
+       .name   = "PCI I/O",
+       .flags  = IORESOURCE_IO
 };
 
 static struct resource cobalt_io_resources[] = {
-       { "dma1", 0x00, 0x1f, IORESOURCE_BUSY },
-       { "timer", 0x40, 0x5f, IORESOURCE_BUSY },
-       { "keyboard", 0x60, 0x6f, IORESOURCE_BUSY },
-       { "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY },
-       { "dma2", 0xc0, 0xdf, IORESOURCE_BUSY },
+       {
+               .start  = 0x00,
+               .end    = 0x1f,
+               .name   = "dma1",
+               .flags  = IORESOURCE_BUSY
+       }, {
+               .start  = 0x40,
+               .end    = 0x5f,
+               .name   = "timer",
+               .flags  = IORESOURCE_BUSY
+       }, {
+               .start  = 0x60,
+               .end    = 0x6f,
+               .name   = "keyboard",
+               .flags  = IORESOURCE_BUSY
+       }, {
+               .start  = 0x80,
+               .end    = 0x8f,
+               .name   = "dma page reg",
+               .flags  = IORESOURCE_BUSY
+       }, {
+               .start  = 0xc0,
+               .end    = 0xdf,
+               .name   = "dma2",
+               .flags  = IORESOURCE_BUSY
+       },
 };
 
 #define COBALT_IO_RESOURCES (sizeof(cobalt_io_resources)/sizeof(struct resource))
@@ -92,7 +119,7 @@ static struct pci_controller cobalt_pci_controller = {
        .io_offset      = 0 - GT64111_IO_BASE
 };
 
-void __init plat_setup(void)
+void __init plat_mem_setup(void)
 {
        static struct uart_port uart;
        unsigned int devfn = PCI_DEVFN(COBALT_PCICONF_VIA, 0);
@@ -102,21 +129,11 @@ void __init plat_setup(void)
        _machine_halt = cobalt_machine_halt;
        pm_power_off = cobalt_machine_power_off;
 
-       board_timer_setup = cobalt_timer_setup;
-
         set_io_port_base(CKSEG1ADDR(GT64111_IO_BASE));
 
        /* I/O port resource must include UART and LCD/buttons */
        ioport_resource.end = 0x0fffffff;
 
-       /*
-        * This is a prom style console. We just poke at the
-        *  UART to make it talk.
-        * Only use this console if you really screw up and can't
-        *  get to the stage of setting up a real serial console.
-        */
-       /*ns16550_setup_console();*/
-
        /* request I/O space for devices used on all i[345]86 PCs */
        for (i = 0; i < COBALT_IO_RESOURCES; i++)
                request_resource(&ioport_resource, cobalt_io_resources + i);
@@ -136,6 +153,10 @@ void __init plat_setup(void)
 #ifdef CONFIG_SERIAL_8250
        if (cobalt_board_id > COBALT_BRD_ID_RAQ1) {
 
+#ifdef CONFIG_EARLY_PRINTK
+               cobalt_early_console();
+#endif
+
                uart.line       = 0;
                uart.type       = PORT_UNKNOWN;
                uart.uartclk    = 18432000;