powerpc/85xx: Rework MPC8536DS device trees
[cascardo/linux.git] / arch / powerpc / boot / dts / mpc8536ds_36b.dts
index d95b260..8f4b929 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * MPC8536 DS Device Tree Source
+ * MPC8536DS Device Tree Source (36-bit address map)
  *
  * Copyright 2008-2009 Freescale Semiconductor, Inc.
  *
@@ -9,24 +9,11 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "fsl/mpc8536si-pre.dtsi"
 
 / {
        model = "fsl,mpc8536ds";
        compatible = "fsl,mpc8536ds";
-       #address-cells = <2>;
-       #size-cells = <2>;
-
-       aliases {
-               ethernet0 = &enet0;
-               ethernet1 = &enet1;
-               serial0 = &serial0;
-               serial1 = &serial1;
-               pci0 = &pci0;
-               pci1 = &pci1;
-               pci2 = &pci2;
-               pci3 = &pci3;
-       };
 
        cpus {
                #cpus = <1>;
                reg = <0 0 0 0>;        // Filled by U-Boot
        };
 
-       soc@fffe00000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               device_type = "soc";
-               compatible = "simple-bus";
-               ranges = <0x0 0xf 0xffe00000 0x100000>;
-               bus-frequency = <0>;            // Filled out by uboot.
-
-               ecm-law@0 {
-                       compatible = "fsl,ecm-law";
-                       reg = <0x0 0x1000>;
-                       fsl,num-laws = <12>;
-               };
-
-               ecm@1000 {
-                       compatible = "fsl,mpc8536-ecm", "fsl,ecm";
-                       reg = <0x1000 0x1000>;
-                       interrupts = <17 2>;
-                       interrupt-parent = <&mpic>;
-               };
-
-               memory-controller@2000 {
-                       compatible = "fsl,mpc8536-memory-controller";
-                       reg = <0x2000 0x1000>;
-                       interrupt-parent = <&mpic>;
-                       interrupts = <18 0x2>;
-               };
-
-               L2: l2-cache-controller@20000 {
-                       compatible = "fsl,mpc8536-l2-cache-controller";
-                       reg = <0x20000 0x1000>;
-                       interrupt-parent = <&mpic>;
-                       interrupts = <16 0x2>;
-               };
-
-               i2c@3000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       cell-index = <0>;
-                       compatible = "fsl-i2c";
-                       reg = <0x3000 0x100>;
-                       interrupts = <43 0x2>;
-                       interrupt-parent = <&mpic>;
-                       dfsrr;
-               };
-
-               i2c@3100 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       cell-index = <1>;
-                       compatible = "fsl-i2c";
-                       reg = <0x3100 0x100>;
-                       interrupts = <43 0x2>;
-                       interrupt-parent = <&mpic>;
-                       dfsrr;
-                       rtc@68 {
-                               compatible = "dallas,ds3232";
-                               reg = <0x68>;
-                               interrupts = <0 0x1>;
-                               interrupt-parent = <&mpic>;
-                       };
-               };
-
-               dma@21300 {
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-                       compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
-                       reg = <0x21300 4>;
-                       ranges = <0 0x21100 0x200>;
-                       cell-index = <0>;
-                       dma-channel@0 {
-                               compatible = "fsl,mpc8536-dma-channel",
-                                            "fsl,eloplus-dma-channel";
-                               reg = <0x0 0x80>;
-                               cell-index = <0>;
-                               interrupt-parent = <&mpic>;
-                               interrupts = <20 2>;
-                       };
-                       dma-channel@80 {
-                               compatible = "fsl,mpc8536-dma-channel",
-                                            "fsl,eloplus-dma-channel";
-                               reg = <0x80 0x80>;
-                               cell-index = <1>;
-                               interrupt-parent = <&mpic>;
-                               interrupts = <21 2>;
-                       };
-                       dma-channel@100 {
-                               compatible = "fsl,mpc8536-dma-channel",
-                                            "fsl,eloplus-dma-channel";
-                               reg = <0x100 0x80>;
-                               cell-index = <2>;
-                               interrupt-parent = <&mpic>;
-                               interrupts = <22 2>;
-                       };
-                       dma-channel@180 {
-                               compatible = "fsl,mpc8536-dma-channel",
-                                            "fsl,eloplus-dma-channel";
-                               reg = <0x180 0x80>;
-                               cell-index = <3>;
-                               interrupt-parent = <&mpic>;
-                               interrupts = <23 2>;
-                       };
-               };
-
-               usb@22000 {
-                       compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
-                       reg = <0x22000 0x1000>;
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       interrupt-parent = <&mpic>;
-                       interrupts = <28 0x2>;
-                       phy_type = "ulpi";
-               };
-
-               usb@23000 {
-                       compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
-                       reg = <0x23000 0x1000>;
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       interrupt-parent = <&mpic>;
-                       interrupts = <46 0x2>;
-                       phy_type = "ulpi";
-               };
-
-               enet0: ethernet@24000 {
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-                       cell-index = <0>;
-                       device_type = "network";
-                       model = "eTSEC";
-                       compatible = "gianfar";
-                       reg = <0x24000 0x1000>;
-                       ranges = <0x0 0x24000 0x1000>;
-                       local-mac-address = [ 00 00 00 00 00 00 ];
-                       interrupts = <29 2 30 2 34 2>;
-                       interrupt-parent = <&mpic>;
-                       tbi-handle = <&tbi0>;
-                       phy-handle = <&phy1>;
-                       phy-connection-type = "rgmii-id";
-
-                       mdio@520 {
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               compatible = "fsl,gianfar-mdio";
-                               reg = <0x520 0x20>;
-
-                               phy0: ethernet-phy@0 {
-                                       interrupt-parent = <&mpic>;
-                                       interrupts = <10 0x1>;
-                                       reg = <0>;
-                                       device_type = "ethernet-phy";
-                               };
-                               phy1: ethernet-phy@1 {
-                                       interrupt-parent = <&mpic>;
-                                       interrupts = <10 0x1>;
-                                       reg = <1>;
-                                       device_type = "ethernet-phy";
-                               };
-                               tbi0: tbi-phy@11 {
-                                       reg = <0x11>;
-                                       device_type = "tbi-phy";
-                               };
-                       };
-               };
-
-               enet1: ethernet@26000 {
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-                       cell-index = <1>;
-                       device_type = "network";
-                       model = "eTSEC";
-                       compatible = "gianfar";
-                       reg = <0x26000 0x1000>;
-                       ranges = <0x0 0x26000 0x1000>;
-                       local-mac-address = [ 00 00 00 00 00 00 ];
-                       interrupts = <31 2 32 2 33 2>;
-                       interrupt-parent = <&mpic>;
-                       tbi-handle = <&tbi1>;
-                       phy-handle = <&phy0>;
-                       phy-connection-type = "rgmii-id";
-
-                       mdio@520 {
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               compatible = "fsl,gianfar-tbi";
-                               reg = <0x520 0x20>;
-
-                               tbi1: tbi-phy@11 {
-                                       reg = <0x11>;
-                                       device_type = "tbi-phy";
-                               };
-                       };
-               };
-
-               usb@2b000 {
-                       compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
-                       reg = <0x2b000 0x1000>;
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       interrupt-parent = <&mpic>;
-                       interrupts = <60 0x2>;
-                       dr_mode = "peripheral";
-                       phy_type = "ulpi";
-               };
-
-               sdhci@2e000 {
-                       compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
-                       reg = <0x2e000 0x1000>;
-                       interrupts = <72 0x2>;
-                       interrupt-parent = <&mpic>;
-                       clock-frequency = <250000000>;
-               };
-
-               serial0: serial@4500 {
-                       cell-index = <0>;
-                       device_type = "serial";
-                       compatible = "ns16550";
-                       reg = <0x4500 0x100>;
-                       clock-frequency = <0>;
-                       interrupts = <42 0x2>;
-                       interrupt-parent = <&mpic>;
-               };
-
-               serial1: serial@4600 {
-                       cell-index = <1>;
-                       device_type = "serial";
-                       compatible = "ns16550";
-                       reg = <0x4600 0x100>;
-                       clock-frequency = <0>;
-                       interrupts = <42 0x2>;
-                       interrupt-parent = <&mpic>;
-               };
-
-               crypto@30000 {
-                       compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-                                    "fsl,sec2.1", "fsl,sec2.0";
-                       reg = <0x30000 0x10000>;
-                       interrupts = <45 2 58 2>;
-                       interrupt-parent = <&mpic>;
-                       fsl,num-channels = <4>;
-                       fsl,channel-fifo-len = <24>;
-                       fsl,exec-units-mask = <0x9fe>;
-                       fsl,descriptor-types-mask = <0x3ab0ebf>;
-               };
-
-               sata@18000 {
-                       compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
-                       reg = <0x18000 0x1000>;
-                       cell-index = <1>;
-                       interrupts = <74 0x2>;
-                       interrupt-parent = <&mpic>;
-               };
-
-               sata@19000 {
-                       compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
-                       reg = <0x19000 0x1000>;
-                       cell-index = <2>;
-                       interrupts = <41 0x2>;
-                       interrupt-parent = <&mpic>;
-               };
-
-               global-utilities@e0000 {        //global utilities block
-                       compatible = "fsl,mpc8548-guts";
-                       reg = <0xe0000 0x1000>;
-                       fsl,has-rstcr;
-               };
-
-               mpic: pic@40000 {
-                       clock-frequency = <0>;
-                       interrupt-controller;
-                       #address-cells = <0>;
-                       #interrupt-cells = <2>;
-                       reg = <0x40000 0x40000>;
-                       compatible = "chrp,open-pic";
-                       device_type = "open-pic";
-                       big-endian;
-               };
+       lbc: localbus@ffe05000 {
+               reg = <0 0xffe05000 0 0x1000>;
+       };
 
-               msi@41600 {
-                       compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
-                       reg = <0x41600 0x80>;
-                       msi-available-ranges = <0 0x100>;
-                       interrupts = <
-                               0xe0 0
-                               0xe1 0
-                               0xe2 0
-                               0xe3 0
-                               0xe4 0
-                               0xe5 0
-                               0xe6 0
-                               0xe7 0>;
-                       interrupt-parent = <&mpic>;
-               };
+       board_soc: soc: soc@fffe00000 {
+               ranges = <0x0 0xf 0xffe00000 0x100000>;
        };
 
-       pci0: pci@fffe08000 {
-               compatible = "fsl,mpc8540-pci";
-               device_type = "pci";
+       pci0: pci@ffe08000 {
+               reg = <0xf 0xffe08000 0 0x1000>;
+               ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
+                         0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
+               clock-frequency = <66666666>;
                interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
                interrupt-map = <
 
                        /* IDSEL 0x11 J17 Slot 1 */
-                       0x8800 0 0 1 &mpic 1 1
-                       0x8800 0 0 2 &mpic 2 1
-                       0x8800 0 0 3 &mpic 3 1
-                       0x8800 0 0 4 &mpic 4 1>;
-
-               interrupt-parent = <&mpic>;
-               interrupts = <24 0x2>;
-               bus-range = <0 0xff>;
-               ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
-                         0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
-               clock-frequency = <66666666>;
-               #interrupt-cells = <1>;
-               #size-cells = <2>;
-               #address-cells = <3>;
-               reg = <0xf 0xffe08000 0 0x1000>;
+                       0x8800 0 0 1 &mpic 1 1 0 0
+                       0x8800 0 0 2 &mpic 2 1 0 0
+                       0x8800 0 0 3 &mpic 3 1 0 0
+                       0x8800 0 0 4 &mpic 4 1 0 0>;
        };
 
-       pci1: pcie@fffe09000 {
-               compatible = "fsl,mpc8548-pcie";
-               device_type = "pci";
-               #interrupt-cells = <1>;
-               #size-cells = <2>;
-               #address-cells = <3>;
+       pci1: pcie@ffe09000 {
                reg = <0xf 0xffe09000 0 0x1000>;
-               bus-range = <0 0xff>;
                ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000
                          0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>;
-               clock-frequency = <33333333>;
-               interrupt-parent = <&mpic>;
-               interrupts = <25 0x2>;
-               interrupt-map-mask = <0xf800 0 0 7>;
-               interrupt-map = <
-                       /* IDSEL 0x0 */
-                       0000 0 0 1 &mpic 4 1
-                       0000 0 0 2 &mpic 5 1
-                       0000 0 0 3 &mpic 6 1
-                       0000 0 0 4 &mpic 7 1
-                       >;
                pcie@0 {
-                       reg = <0 0 0 0 0>;
-                       #size-cells = <2>;
-                       #address-cells = <3>;
-                       device_type = "pci";
                        ranges = <0x02000000 0 0xf8000000
                                  0x02000000 0 0xf8000000
                                  0 0x08000000
        };
 
        pci2: pcie@fffe0a000 {
-               compatible = "fsl,mpc8548-pcie";
-               device_type = "pci";
-               #interrupt-cells = <1>;
-               #size-cells = <2>;
-               #address-cells = <3>;
                reg = <0xf 0xffe0a000 0 0x1000>;
-               bus-range = <0 0xff>;
                ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000
                          0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>;
-               clock-frequency = <33333333>;
-               interrupt-parent = <&mpic>;
-               interrupts = <26 0x2>;
-               interrupt-map-mask = <0xf800 0 0 7>;
-               interrupt-map = <
-                       /* IDSEL 0x0 */
-                       0000 0 0 1 &mpic 0 1
-                       0000 0 0 2 &mpic 1 1
-                       0000 0 0 3 &mpic 2 1
-                       0000 0 0 4 &mpic 3 1
-                       >;
                pcie@0 {
-                       reg = <0 0 0 0 0>;
-                       #size-cells = <2>;
-                       #address-cells = <3>;
-                       device_type = "pci";
                        ranges = <0x02000000 0 0xf8000000
                                  0x02000000 0 0xf8000000
                                  0 0x08000000
        };
 
        pci3: pcie@fffe0b000 {
-               compatible = "fsl,mpc8548-pcie";
-               device_type = "pci";
-               #interrupt-cells = <1>;
-               #size-cells = <2>;
-               #address-cells = <3>;
                reg = <0xf 0xffe0b000 0 0x1000>;
-               bus-range = <0 0xff>;
                ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
                          0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>;
-               clock-frequency = <33333333>;
-               interrupt-parent = <&mpic>;
-               interrupts = <27 0x2>;
-               interrupt-map-mask = <0xf800 0 0 7>;
-               interrupt-map = <
-                       /* IDSEL 0x0 */
-                       0000 0 0 1 &mpic 8 1
-                       0000 0 0 2 &mpic 9 1
-                       0000 0 0 3 &mpic 10 1
-                       0000 0 0 4 &mpic 11 1
-                       >;
-
                pcie@0 {
-                       reg = <0 0 0 0 0>;
-                       #size-cells = <2>;
-                       #address-cells = <3>;
-                       device_type = "pci";
                        ranges = <0x02000000 0 0xe0000000
                                  0x02000000 0 0xe0000000
                                  0 0x20000000
                };
        };
 };
+
+/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536ds.dtsi"