return ret;
}
+static int pnv_eeh_cap_start(struct pci_dn *pdn)
+{
+ u32 status;
+
+ if (!pdn)
+ return 0;
+
+ pnv_pci_cfg_read(pdn, PCI_STATUS, 2, &status);
+ if (!(status & PCI_STATUS_CAP_LIST))
+ return 0;
+
+ return PCI_CAPABILITY_LIST;
+}
+
+static int pnv_eeh_find_cap(struct pci_dn *pdn, int cap)
+{
+ int pos = pnv_eeh_cap_start(pdn);
+ int cnt = 48; /* Maximal number of capabilities */
+ u32 id;
+
+ if (!pos)
+ return 0;
+
+ while (cnt--) {
+ pnv_pci_cfg_read(pdn, pos, 1, &pos);
+ if (pos < 0x40)
+ break;
+
+ pos &= ~3;
+ pnv_pci_cfg_read(pdn, pos + PCI_CAP_LIST_ID, 1, &id);
+ if (id == 0xff)
+ break;
+
+ /* Found */
+ if (id == cap)
+ return pos;
+
+ /* Next one */
+ pos += PCI_CAP_LIST_NEXT;
+ }
+
+ return 0;
+}
+
+static int pnv_eeh_find_ecap(struct pci_dn *pdn, int cap)
+{
+ struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+ u32 header;
+ int pos = 256, ttl = (4096 - 256) / 8;
+
+ if (!edev || !edev->pcie_cap)
+ return 0;
+ if (pnv_pci_cfg_read(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+ return 0;
+ else if (!header)
+ return 0;
+
+ while (ttl-- > 0) {
+ if (PCI_EXT_CAP_ID(header) == cap && pos)
+ return pos;
+
+ pos = PCI_EXT_CAP_NEXT(header);
+ if (pos < 256)
+ break;
+
+ if (pnv_pci_cfg_read(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+ break;
+ }
+
+ return 0;
+}
+
/**
- * pnv_eeh_dev_probe - Do probe on PCI device
- * @dev: PCI device
- * @flag: unused
+ * pnv_eeh_probe - Do probe on PCI device
+ * @pdn: PCI device node
+ * @data: unused
*
* When EEH module is installed during system boot, all PCI devices
* are checked one by one to see if it supports EEH. The function
* was possiblly triggered by EEH core, the binding between EEH device
* and the PCI device isn't built yet.
*/
-static int pnv_eeh_dev_probe(struct pci_dev *dev, void *flag)
+static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
{
- struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pci_controller *hose = pdn->phb;
struct pnv_phb *phb = hose->private_data;
- struct device_node *dn = pci_device_to_OF_node(dev);
- struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+ struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+ uint32_t pcie_flags;
int ret;
/*
* the root bridge. So it's not reasonable to continue
* the probing.
*/
- if (!dn || !edev || edev->pe)
- return 0;
+ if (!edev || edev->pe)
+ return NULL;
/* Skip for PCI-ISA bridge */
- if ((dev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
- return 0;
+ if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA)
+ return NULL;
/* Initialize eeh device */
- edev->class_code = dev->class;
+ edev->class_code = pdn->class_code;
edev->mode &= 0xFFFFFF00;
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+ edev->pcix_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_PCIX);
+ edev->pcie_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_EXP);
+ edev->aer_cap = pnv_eeh_find_ecap(pdn, PCI_EXT_CAP_ID_ERR);
+ if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
edev->mode |= EEH_DEV_BRIDGE;
- edev->pcix_cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
- if (pci_is_pcie(dev)) {
- edev->pcie_cap = pci_pcie_cap(dev);
-
- if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT)
- edev->mode |= EEH_DEV_ROOT_PORT;
- else if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM)
- edev->mode |= EEH_DEV_DS_PORT;
-
- edev->aer_cap = pci_find_ext_capability(dev,
- PCI_EXT_CAP_ID_ERR);
+ if (edev->pcie_cap) {
+ pnv_pci_cfg_read(pdn, edev->pcie_cap + PCI_EXP_FLAGS,
+ 2, &pcie_flags);
+ pcie_flags = (pcie_flags & PCI_EXP_FLAGS_TYPE) >> 4;
+ if (pcie_flags == PCI_EXP_TYPE_ROOT_PORT)
+ edev->mode |= EEH_DEV_ROOT_PORT;
+ else if (pcie_flags == PCI_EXP_TYPE_DOWNSTREAM)
+ edev->mode |= EEH_DEV_DS_PORT;
+ }
}
- edev->config_addr = ((dev->bus->number << 8) | dev->devfn);
- edev->pe_config_addr = phb->bdfn_to_pe(phb, dev->bus, dev->devfn & 0xff);
+ edev->config_addr = (pdn->busno << 8) | (pdn->devfn);
+ edev->pe_config_addr = phb->ioda.pe_rmap[edev->config_addr];
/* Create PE */
ret = eeh_add_to_parent_pe(edev);
if (ret) {
- pr_warn("%s: Can't add PCI dev %s to parent PE (%d)\n",
- __func__, pci_name(dev), ret);
- return ret;
+ pr_warn("%s: Can't add PCI dev %04x:%02x:%02x.%01x to parent PE (%d)\n",
+ __func__, hose->global_number, pdn->busno,
+ PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn), ret);
+ return NULL;
}
/*
* Broadcom Austin 4-ports NICs (14e4:1657)
* Broadcom Shiner 2-ports 10G NICs (14e4:168e)
*/
- if ((dev->vendor == PCI_VENDOR_ID_BROADCOM && dev->device == 0x1657) ||
- (dev->vendor == PCI_VENDOR_ID_BROADCOM && dev->device == 0x168e))
+ if ((pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
+ pdn->device_id == 0x1657) ||
+ (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
+ pdn->device_id == 0x168e))
edev->pe->state |= EEH_PE_CFG_RESTRICTED;
/*
* to PE reset.
*/
if (!edev->pe->bus)
- edev->pe->bus = dev->bus;
+ edev->pe->bus = pci_find_bus(hose->global_number,
+ pdn->busno);
/*
* Enable EEH explicitly so that we will do EEH check
/* Save memory bars */
eeh_save_bars(edev);
- return 0;
+ return NULL;
}
/**
{
struct pci_controller *hose = pe->phb;
struct pnv_phb *phb = hose->private_data;
- int ret = -EEXIST;
+ bool freeze_pe = false;
+ int opt, ret = 0;
+ s64 rc;
- /*
- * What we need do is pass it down for hardware
- * implementation to handle it.
- */
- if (phb->eeh_ops && phb->eeh_ops->set_option)
- ret = phb->eeh_ops->set_option(pe, option);
+ /* Sanity check on option */
+ switch (option) {
+ case EEH_OPT_DISABLE:
+ return -EPERM;
+ case EEH_OPT_ENABLE:
+ return 0;
+ case EEH_OPT_THAW_MMIO:
+ opt = OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO;
+ break;
+ case EEH_OPT_THAW_DMA:
+ opt = OPAL_EEH_ACTION_CLEAR_FREEZE_DMA;
+ break;
+ case EEH_OPT_FREEZE_PE:
+ freeze_pe = true;
+ opt = OPAL_EEH_ACTION_SET_FREEZE_ALL;
+ break;
+ default:
+ pr_warn("%s: Invalid option %d\n", __func__, option);
+ return -EINVAL;
+ }
+
+ /* If PHB supports compound PE, to handle it */
+ if (freeze_pe) {
+ if (phb->freeze_pe) {
+ phb->freeze_pe(phb, pe->addr);
+ } else {
+ rc = opal_pci_eeh_freeze_set(phb->opal_id,
+ pe->addr, opt);
+ if (rc != OPAL_SUCCESS) {
+ pr_warn("%s: Failure %lld freezing "
+ "PHB#%x-PE#%x\n",
+ __func__, rc,
+ phb->hose->global_number, pe->addr);
+ ret = -EIO;
+ }
+ }
+ } else {
+ if (phb->unfreeze_pe) {
+ ret = phb->unfreeze_pe(phb, pe->addr, opt);
+ } else {
+ rc = opal_pci_eeh_freeze_clear(phb->opal_id,
+ pe->addr, opt);
+ if (rc != OPAL_SUCCESS) {
+ pr_warn("%s: Failure %lld enable %d "
+ "for PHB#%x-PE#%x\n",
+ __func__, rc, option,
+ phb->hose->global_number, pe->addr);
+ ret = -EIO;
+ }
+ }
+ }
return ret;
}
return pe->addr;
}
+static void pnv_eeh_get_phb_diag(struct eeh_pe *pe)
+{
+ struct pnv_phb *phb = pe->phb->private_data;
+ s64 rc;
+
+ rc = opal_pci_get_phb_diag_data2(phb->opal_id, pe->data,
+ PNV_PCI_DIAG_BUF_SIZE);
+ if (rc != OPAL_SUCCESS)
+ pr_warn("%s: Failure %lld getting PHB#%x diag-data\n",
+ __func__, rc, pe->phb->global_number);
+}
+
+static int pnv_eeh_get_phb_state(struct eeh_pe *pe)
+{
+ struct pnv_phb *phb = pe->phb->private_data;
+ u8 fstate;
+ __be16 pcierr;
+ s64 rc;
+ int result = 0;
+
+ rc = opal_pci_eeh_freeze_status(phb->opal_id,
+ pe->addr,
+ &fstate,
+ &pcierr,
+ NULL);
+ if (rc != OPAL_SUCCESS) {
+ pr_warn("%s: Failure %lld getting PHB#%x state\n",
+ __func__, rc, phb->hose->global_number);
+ return EEH_STATE_NOT_SUPPORT;
+ }
+
+ /*
+ * Check PHB state. If the PHB is frozen for the
+ * first time, to dump the PHB diag-data.
+ */
+ if (be16_to_cpu(pcierr) != OPAL_EEH_PHB_ERROR) {
+ result = (EEH_STATE_MMIO_ACTIVE |
+ EEH_STATE_DMA_ACTIVE |
+ EEH_STATE_MMIO_ENABLED |
+ EEH_STATE_DMA_ENABLED);
+ } else if (!(pe->state & EEH_PE_ISOLATED)) {
+ eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
+ pnv_eeh_get_phb_diag(pe);
+
+ if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
+ pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
+ }
+
+ return result;
+}
+
+static int pnv_eeh_get_pe_state(struct eeh_pe *pe)
+{
+ struct pnv_phb *phb = pe->phb->private_data;
+ u8 fstate;
+ __be16 pcierr;
+ s64 rc;
+ int result;
+
+ /*
+ * We don't clobber hardware frozen state until PE
+ * reset is completed. In order to keep EEH core
+ * moving forward, we have to return operational
+ * state during PE reset.
+ */
+ if (pe->state & EEH_PE_RESET) {
+ result = (EEH_STATE_MMIO_ACTIVE |
+ EEH_STATE_DMA_ACTIVE |
+ EEH_STATE_MMIO_ENABLED |
+ EEH_STATE_DMA_ENABLED);
+ return result;
+ }
+
+ /*
+ * Fetch PE state from hardware. If the PHB
+ * supports compound PE, let it handle that.
+ */
+ if (phb->get_pe_state) {
+ fstate = phb->get_pe_state(phb, pe->addr);
+ } else {
+ rc = opal_pci_eeh_freeze_status(phb->opal_id,
+ pe->addr,
+ &fstate,
+ &pcierr,
+ NULL);
+ if (rc != OPAL_SUCCESS) {
+ pr_warn("%s: Failure %lld getting PHB#%x-PE%x state\n",
+ __func__, rc, phb->hose->global_number,
+ pe->addr);
+ return EEH_STATE_NOT_SUPPORT;
+ }
+ }
+
+ /* Figure out state */
+ switch (fstate) {
+ case OPAL_EEH_STOPPED_NOT_FROZEN:
+ result = (EEH_STATE_MMIO_ACTIVE |
+ EEH_STATE_DMA_ACTIVE |
+ EEH_STATE_MMIO_ENABLED |
+ EEH_STATE_DMA_ENABLED);
+ break;
+ case OPAL_EEH_STOPPED_MMIO_FREEZE:
+ result = (EEH_STATE_DMA_ACTIVE |
+ EEH_STATE_DMA_ENABLED);
+ break;
+ case OPAL_EEH_STOPPED_DMA_FREEZE:
+ result = (EEH_STATE_MMIO_ACTIVE |
+ EEH_STATE_MMIO_ENABLED);
+ break;
+ case OPAL_EEH_STOPPED_MMIO_DMA_FREEZE:
+ result = 0;
+ break;
+ case OPAL_EEH_STOPPED_RESET:
+ result = EEH_STATE_RESET_ACTIVE;
+ break;
+ case OPAL_EEH_STOPPED_TEMP_UNAVAIL:
+ result = EEH_STATE_UNAVAILABLE;
+ break;
+ case OPAL_EEH_STOPPED_PERM_UNAVAIL:
+ result = EEH_STATE_NOT_SUPPORT;
+ break;
+ default:
+ result = EEH_STATE_NOT_SUPPORT;
+ pr_warn("%s: Invalid PHB#%x-PE#%x state %x\n",
+ __func__, phb->hose->global_number,
+ pe->addr, fstate);
+ }
+
+ /*
+ * If PHB supports compound PE, to freeze all
+ * slave PEs for consistency.
+ *
+ * If the PE is switching to frozen state for the
+ * first time, to dump the PHB diag-data.
+ */
+ if (!(result & EEH_STATE_NOT_SUPPORT) &&
+ !(result & EEH_STATE_UNAVAILABLE) &&
+ !(result & EEH_STATE_MMIO_ACTIVE) &&
+ !(result & EEH_STATE_DMA_ACTIVE) &&
+ !(pe->state & EEH_PE_ISOLATED)) {
+ if (phb->freeze_pe)
+ phb->freeze_pe(phb, pe->addr);
+
+ eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
+ pnv_eeh_get_phb_diag(pe);
+
+ if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
+ pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
+ }
+
+ return result;
+}
+
/**
* pnv_eeh_get_state - Retrieve PE state
* @pe: EEH PE
*/
static int pnv_eeh_get_state(struct eeh_pe *pe, int *delay)
{
- struct pci_controller *hose = pe->phb;
+ int ret;
+
+ if (pe->type & EEH_PE_PHB)
+ ret = pnv_eeh_get_phb_state(pe);
+ else
+ ret = pnv_eeh_get_pe_state(pe);
+
+ if (!delay)
+ return ret;
+
+ /*
+ * If the PE state is temporarily unavailable,
+ * to inform the EEH core delay for default
+ * period (1 second)
+ */
+ *delay = 0;
+ if (ret & EEH_STATE_UNAVAILABLE)
+ *delay = 1000;
+
+ return ret;
+}
+
+static s64 pnv_eeh_phb_poll(struct pnv_phb *phb)
+{
+ s64 rc = OPAL_HARDWARE;
+
+ while (1) {
+ rc = opal_pci_poll(phb->opal_id);
+ if (rc <= 0)
+ break;
+
+ if (system_state < SYSTEM_RUNNING)
+ udelay(1000 * rc);
+ else
+ msleep(rc);
+ }
+
+ return rc;
+}
+
+int pnv_eeh_phb_reset(struct pci_controller *hose, int option)
+{
struct pnv_phb *phb = hose->private_data;
- int ret = EEH_STATE_NOT_SUPPORT;
+ s64 rc = OPAL_HARDWARE;
+
+ pr_debug("%s: Reset PHB#%x, option=%d\n",
+ __func__, hose->global_number, option);
+
+ /* Issue PHB complete reset request */
+ if (option == EEH_RESET_FUNDAMENTAL ||
+ option == EEH_RESET_HOT)
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_RESET_PHB_COMPLETE,
+ OPAL_ASSERT_RESET);
+ else if (option == EEH_RESET_DEACTIVATE)
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_RESET_PHB_COMPLETE,
+ OPAL_DEASSERT_RESET);
+ if (rc < 0)
+ goto out;
- if (phb->eeh_ops && phb->eeh_ops->get_state) {
- ret = phb->eeh_ops->get_state(pe);
+ /*
+ * Poll state of the PHB until the request is done
+ * successfully. The PHB reset is usually PHB complete
+ * reset followed by hot reset on root bus. So we also
+ * need the PCI bus settlement delay.
+ */
+ rc = pnv_eeh_phb_poll(phb);
+ if (option == EEH_RESET_DEACTIVATE) {
+ if (system_state < SYSTEM_RUNNING)
+ udelay(1000 * EEH_PE_RST_SETTLE_TIME);
+ else
+ msleep(EEH_PE_RST_SETTLE_TIME);
+ }
+out:
+ if (rc != OPAL_SUCCESS)
+ return -EIO;
- /*
- * If the PE state is temporarily unavailable,
- * to inform the EEH core delay for default
- * period (1 second)
- */
- if (delay) {
- *delay = 0;
- if (ret & EEH_STATE_UNAVAILABLE)
- *delay = 1000;
+ return 0;
+}
+
+static int pnv_eeh_root_reset(struct pci_controller *hose, int option)
+{
+ struct pnv_phb *phb = hose->private_data;
+ s64 rc = OPAL_HARDWARE;
+
+ pr_debug("%s: Reset PHB#%x, option=%d\n",
+ __func__, hose->global_number, option);
+
+ /*
+ * During the reset deassert time, we needn't care
+ * the reset scope because the firmware does nothing
+ * for fundamental or hot reset during deassert phase.
+ */
+ if (option == EEH_RESET_FUNDAMENTAL)
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_RESET_PCI_FUNDAMENTAL,
+ OPAL_ASSERT_RESET);
+ else if (option == EEH_RESET_HOT)
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_RESET_PCI_HOT,
+ OPAL_ASSERT_RESET);
+ else if (option == EEH_RESET_DEACTIVATE)
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_RESET_PCI_HOT,
+ OPAL_DEASSERT_RESET);
+ if (rc < 0)
+ goto out;
+
+ /* Poll state of the PHB until the request is done */
+ rc = pnv_eeh_phb_poll(phb);
+ if (option == EEH_RESET_DEACTIVATE)
+ msleep(EEH_PE_RST_SETTLE_TIME);
+out:
+ if (rc != OPAL_SUCCESS)
+ return -EIO;
+
+ return 0;
+}
+
+static int pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
+{
+ struct pci_dn *pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
+ struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+ int aer = edev ? edev->aer_cap : 0;
+ u32 ctrl;
+
+ pr_debug("%s: Reset PCI bus %04x:%02x with option %d\n",
+ __func__, pci_domain_nr(dev->bus),
+ dev->bus->number, option);
+
+ switch (option) {
+ case EEH_RESET_FUNDAMENTAL:
+ case EEH_RESET_HOT:
+ /* Don't report linkDown event */
+ if (aer) {
+ eeh_ops->read_config(pdn, aer + PCI_ERR_UNCOR_MASK,
+ 4, &ctrl);
+ ctrl |= PCI_ERR_UNC_SURPDN;
+ eeh_ops->write_config(pdn, aer + PCI_ERR_UNCOR_MASK,
+ 4, ctrl);
}
+
+ eeh_ops->read_config(pdn, PCI_BRIDGE_CONTROL, 2, &ctrl);
+ ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
+ eeh_ops->write_config(pdn, PCI_BRIDGE_CONTROL, 2, ctrl);
+
+ msleep(EEH_PE_RST_HOLD_TIME);
+ break;
+ case EEH_RESET_DEACTIVATE:
+ eeh_ops->read_config(pdn, PCI_BRIDGE_CONTROL, 2, &ctrl);
+ ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+ eeh_ops->write_config(pdn, PCI_BRIDGE_CONTROL, 2, ctrl);
+
+ msleep(EEH_PE_RST_SETTLE_TIME);
+
+ /* Continue reporting linkDown event */
+ if (aer) {
+ eeh_ops->read_config(pdn, aer + PCI_ERR_UNCOR_MASK,
+ 4, &ctrl);
+ ctrl &= ~PCI_ERR_UNC_SURPDN;
+ eeh_ops->write_config(pdn, aer + PCI_ERR_UNCOR_MASK,
+ 4, ctrl);
+ }
+
+ break;
}
- return ret;
+ return 0;
+}
+
+void pnv_pci_reset_secondary_bus(struct pci_dev *dev)
+{
+ struct pci_controller *hose;
+
+ if (pci_is_root_bus(dev->bus)) {
+ hose = pci_bus_to_host(dev->bus);
+ pnv_eeh_root_reset(hose, EEH_RESET_HOT);
+ pnv_eeh_root_reset(hose, EEH_RESET_DEACTIVATE);
+ } else {
+ pnv_eeh_bridge_reset(dev, EEH_RESET_HOT);
+ pnv_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE);
+ }
}
/**
* @pe: EEH PE
* @option: reset option
*
- * Reset the specified PE
+ * Do reset on the indicated PE. For PCI bus sensitive PE,
+ * we need to reset the parent p2p bridge. The PHB has to
+ * be reinitialized if the p2p bridge is root bridge. For
+ * PCI device sensitive PE, we will try to reset the device
+ * through FLR. For now, we don't have OPAL APIs to do HARD
+ * reset yet, so all reset would be SOFT (HOT) reset.
*/
static int pnv_eeh_reset(struct eeh_pe *pe, int option)
{
struct pci_controller *hose = pe->phb;
- struct pnv_phb *phb = hose->private_data;
- int ret = -EEXIST;
+ struct pci_bus *bus;
+ int ret;
+
+ /*
+ * For PHB reset, we always have complete reset. For those PEs whose
+ * primary bus derived from root complex (root bus) or root port
+ * (usually bus#1), we apply hot or fundamental reset on the root port.
+ * For other PEs, we always have hot reset on the PE primary bus.
+ *
+ * Here, we have different design to pHyp, which always clear the
+ * frozen state during PE reset. However, the good idea here from
+ * benh is to keep frozen state before we get PE reset done completely
+ * (until BAR restore). With the frozen state, HW drops illegal IO
+ * or MMIO access, which can incur recrusive frozen PE during PE
+ * reset. The side effect is that EEH core has to clear the frozen
+ * state explicitly after BAR restore.
+ */
+ if (pe->type & EEH_PE_PHB) {
+ ret = pnv_eeh_phb_reset(hose, option);
+ } else {
+ struct pnv_phb *phb;
+ s64 rc;
+
+ /*
+ * The frozen PE might be caused by PAPR error injection
+ * registers, which are expected to be cleared after hitting
+ * frozen PE as stated in the hardware spec. Unfortunately,
+ * that's not true on P7IOC. So we have to clear it manually
+ * to avoid recursive EEH errors during recovery.
+ */
+ phb = hose->private_data;
+ if (phb->model == PNV_PHB_MODEL_P7IOC &&
+ (option == EEH_RESET_HOT ||
+ option == EEH_RESET_FUNDAMENTAL)) {
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_RESET_PHB_ERROR,
+ OPAL_ASSERT_RESET);
+ if (rc != OPAL_SUCCESS) {
+ pr_warn("%s: Failure %lld clearing "
+ "error injection registers\n",
+ __func__, rc);
+ return -EIO;
+ }
+ }
- if (phb->eeh_ops && phb->eeh_ops->reset)
- ret = phb->eeh_ops->reset(pe, option);
+ bus = eeh_pe_bus_get(pe);
+ if (pci_is_root_bus(bus) ||
+ pci_is_root_bus(bus->parent))
+ ret = pnv_eeh_root_reset(hose, option);
+ else
+ ret = pnv_eeh_bridge_reset(bus->self, option);
+ }
return ret;
}
return 0;
}
-static inline bool pnv_eeh_cfg_blocked(struct device_node *dn)
+static inline bool pnv_eeh_cfg_blocked(struct pci_dn *pdn)
{
- struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+ struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
if (!edev || !edev->pe)
return false;
return false;
}
-static int pnv_eeh_read_config(struct device_node *dn,
+static int pnv_eeh_read_config(struct pci_dn *pdn,
int where, int size, u32 *val)
{
- if (pnv_eeh_cfg_blocked(dn)) {
+ if (!pdn)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (pnv_eeh_cfg_blocked(pdn)) {
*val = 0xFFFFFFFF;
return PCIBIOS_SET_FAILED;
}
- return pnv_pci_cfg_read(dn, where, size, val);
+ return pnv_pci_cfg_read(pdn, where, size, val);
}
-static int pnv_eeh_write_config(struct device_node *dn,
+static int pnv_eeh_write_config(struct pci_dn *pdn,
int where, int size, u32 val)
{
- if (pnv_eeh_cfg_blocked(dn))
+ if (!pdn)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (pnv_eeh_cfg_blocked(pdn))
return PCIBIOS_SET_FAILED;
- return pnv_pci_cfg_write(dn, where, size, val);
+ return pnv_pci_cfg_write(pdn, where, size, val);
+}
+
+static void pnv_eeh_dump_hub_diag_common(struct OpalIoP7IOCErrorData *data)
+{
+ /* GEM */
+ if (data->gemXfir || data->gemRfir ||
+ data->gemRirqfir || data->gemMask || data->gemRwof)
+ pr_info(" GEM: %016llx %016llx %016llx %016llx %016llx\n",
+ be64_to_cpu(data->gemXfir),
+ be64_to_cpu(data->gemRfir),
+ be64_to_cpu(data->gemRirqfir),
+ be64_to_cpu(data->gemMask),
+ be64_to_cpu(data->gemRwof));
+
+ /* LEM */
+ if (data->lemFir || data->lemErrMask ||
+ data->lemAction0 || data->lemAction1 || data->lemWof)
+ pr_info(" LEM: %016llx %016llx %016llx %016llx %016llx\n",
+ be64_to_cpu(data->lemFir),
+ be64_to_cpu(data->lemErrMask),
+ be64_to_cpu(data->lemAction0),
+ be64_to_cpu(data->lemAction1),
+ be64_to_cpu(data->lemWof));
+}
+
+static void pnv_eeh_get_and_dump_hub_diag(struct pci_controller *hose)
+{
+ struct pnv_phb *phb = hose->private_data;
+ struct OpalIoP7IOCErrorData *data = &phb->diag.hub_diag;
+ long rc;
+
+ rc = opal_pci_get_hub_diag_data(phb->hub_id, data, sizeof(*data));
+ if (rc != OPAL_SUCCESS) {
+ pr_warn("%s: Failed to get HUB#%llx diag-data (%ld)\n",
+ __func__, phb->hub_id, rc);
+ return;
+ }
+
+ switch (data->type) {
+ case OPAL_P7IOC_DIAG_TYPE_RGC:
+ pr_info("P7IOC diag-data for RGC\n\n");
+ pnv_eeh_dump_hub_diag_common(data);
+ if (data->rgc.rgcStatus || data->rgc.rgcLdcp)
+ pr_info(" RGC: %016llx %016llx\n",
+ be64_to_cpu(data->rgc.rgcStatus),
+ be64_to_cpu(data->rgc.rgcLdcp));
+ break;
+ case OPAL_P7IOC_DIAG_TYPE_BI:
+ pr_info("P7IOC diag-data for BI %s\n\n",
+ data->bi.biDownbound ? "Downbound" : "Upbound");
+ pnv_eeh_dump_hub_diag_common(data);
+ if (data->bi.biLdcp0 || data->bi.biLdcp1 ||
+ data->bi.biLdcp2 || data->bi.biFenceStatus)
+ pr_info(" BI: %016llx %016llx %016llx %016llx\n",
+ be64_to_cpu(data->bi.biLdcp0),
+ be64_to_cpu(data->bi.biLdcp1),
+ be64_to_cpu(data->bi.biLdcp2),
+ be64_to_cpu(data->bi.biFenceStatus));
+ break;
+ case OPAL_P7IOC_DIAG_TYPE_CI:
+ pr_info("P7IOC diag-data for CI Port %d\n\n",
+ data->ci.ciPort);
+ pnv_eeh_dump_hub_diag_common(data);
+ if (data->ci.ciPortStatus || data->ci.ciPortLdcp)
+ pr_info(" CI: %016llx %016llx\n",
+ be64_to_cpu(data->ci.ciPortStatus),
+ be64_to_cpu(data->ci.ciPortLdcp));
+ break;
+ case OPAL_P7IOC_DIAG_TYPE_MISC:
+ pr_info("P7IOC diag-data for MISC\n\n");
+ pnv_eeh_dump_hub_diag_common(data);
+ break;
+ case OPAL_P7IOC_DIAG_TYPE_I2C:
+ pr_info("P7IOC diag-data for I2C\n\n");
+ pnv_eeh_dump_hub_diag_common(data);
+ break;
+ default:
+ pr_warn("%s: Invalid type of HUB#%llx diag-data (%d)\n",
+ __func__, phb->hub_id, data->type);
+ }
+}
+
+static int pnv_eeh_get_pe(struct pci_controller *hose,
+ u16 pe_no, struct eeh_pe **pe)
+{
+ struct pnv_phb *phb = hose->private_data;
+ struct pnv_ioda_pe *pnv_pe;
+ struct eeh_pe *dev_pe;
+ struct eeh_dev edev;
+
+ /*
+ * If PHB supports compound PE, to fetch
+ * the master PE because slave PE is invisible
+ * to EEH core.
+ */
+ pnv_pe = &phb->ioda.pe_array[pe_no];
+ if (pnv_pe->flags & PNV_IODA_PE_SLAVE) {
+ pnv_pe = pnv_pe->master;
+ WARN_ON(!pnv_pe ||
+ !(pnv_pe->flags & PNV_IODA_PE_MASTER));
+ pe_no = pnv_pe->pe_number;
+ }
+
+ /* Find the PE according to PE# */
+ memset(&edev, 0, sizeof(struct eeh_dev));
+ edev.phb = hose;
+ edev.pe_config_addr = pe_no;
+ dev_pe = eeh_pe_get(&edev);
+ if (!dev_pe)
+ return -EEXIST;
+
+ /* Freeze the (compound) PE */
+ *pe = dev_pe;
+ if (!(dev_pe->state & EEH_PE_ISOLATED))
+ phb->freeze_pe(phb, pe_no);
+
+ /*
+ * At this point, we're sure the (compound) PE should
+ * have been frozen. However, we still need poke until
+ * hitting the frozen PE on top level.
+ */
+ dev_pe = dev_pe->parent;
+ while (dev_pe && !(dev_pe->type & EEH_PE_PHB)) {
+ int ret;
+ int active_flags = (EEH_STATE_MMIO_ACTIVE |
+ EEH_STATE_DMA_ACTIVE);
+
+ ret = eeh_ops->get_state(dev_pe, NULL);
+ if (ret <= 0 || (ret & active_flags) == active_flags) {
+ dev_pe = dev_pe->parent;
+ continue;
+ }
+
+ /* Frozen parent PE */
+ *pe = dev_pe;
+ if (!(dev_pe->state & EEH_PE_ISOLATED))
+ phb->freeze_pe(phb, dev_pe->addr);
+
+ /* Next one */
+ dev_pe = dev_pe->parent;
+ }
+
+ return 0;
}
/**
* pnv_eeh_next_error - Retrieve next EEH error to handle
* @pe: Affected PE
*
- * Using OPAL API, to retrieve next EEH error for EEH core to handle
+ * The function is expected to be called by EEH core while it gets
+ * special EEH event (without binding PE). The function calls to
+ * OPAL APIs for next error to handle. The informational error is
+ * handled internally by platform. However, the dead IOC, dead PHB,
+ * fenced PHB and frozen PE should be handled by EEH core eventually.
*/
static int pnv_eeh_next_error(struct eeh_pe **pe)
{
struct pci_controller *hose;
- struct pnv_phb *phb = NULL;
+ struct pnv_phb *phb;
+ struct eeh_pe *phb_pe, *parent_pe;
+ __be64 frozen_pe_no;
+ __be16 err_type, severity;
+ int active_flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE);
+ long rc;
+ int state, ret = EEH_NEXT_ERR_NONE;
+
+ /*
+ * While running here, it's safe to purge the event queue.
+ * And we should keep the cached OPAL notifier event sychronized
+ * between the kernel and firmware.
+ */
+ eeh_remove_event(NULL, false);
+ opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul);
list_for_each_entry(hose, &hose_list, list_node) {
+ /*
+ * If the subordinate PCI buses of the PHB has been
+ * removed or is exactly under error recovery, we
+ * needn't take care of it any more.
+ */
phb = hose->private_data;
- break;
- }
+ phb_pe = eeh_phb_pe_get(hose);
+ if (!phb_pe || (phb_pe->state & EEH_PE_ISOLATED))
+ continue;
+
+ rc = opal_pci_next_error(phb->opal_id,
+ &frozen_pe_no, &err_type, &severity);
+ if (rc != OPAL_SUCCESS) {
+ pr_devel("%s: Invalid return value on "
+ "PHB#%x (0x%lx) from opal_pci_next_error",
+ __func__, hose->global_number, rc);
+ continue;
+ }
+
+ /* If the PHB doesn't have error, stop processing */
+ if (be16_to_cpu(err_type) == OPAL_EEH_NO_ERROR ||
+ be16_to_cpu(severity) == OPAL_EEH_SEV_NO_ERROR) {
+ pr_devel("%s: No error found on PHB#%x\n",
+ __func__, hose->global_number);
+ continue;
+ }
+
+ /*
+ * Processing the error. We're expecting the error with
+ * highest priority reported upon multiple errors on the
+ * specific PHB.
+ */
+ pr_devel("%s: Error (%d, %d, %llu) on PHB#%x\n",
+ __func__, be16_to_cpu(err_type),
+ be16_to_cpu(severity), be64_to_cpu(frozen_pe_no),
+ hose->global_number);
+ switch (be16_to_cpu(err_type)) {
+ case OPAL_EEH_IOC_ERROR:
+ if (be16_to_cpu(severity) == OPAL_EEH_SEV_IOC_DEAD) {
+ pr_err("EEH: dead IOC detected\n");
+ ret = EEH_NEXT_ERR_DEAD_IOC;
+ } else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) {
+ pr_info("EEH: IOC informative error "
+ "detected\n");
+ pnv_eeh_get_and_dump_hub_diag(hose);
+ ret = EEH_NEXT_ERR_NONE;
+ }
+
+ break;
+ case OPAL_EEH_PHB_ERROR:
+ if (be16_to_cpu(severity) == OPAL_EEH_SEV_PHB_DEAD) {
+ *pe = phb_pe;
+ pr_err("EEH: dead PHB#%x detected, "
+ "location: %s\n",
+ hose->global_number,
+ eeh_pe_loc_get(phb_pe));
+ ret = EEH_NEXT_ERR_DEAD_PHB;
+ } else if (be16_to_cpu(severity) ==
+ OPAL_EEH_SEV_PHB_FENCED) {
+ *pe = phb_pe;
+ pr_err("EEH: Fenced PHB#%x detected, "
+ "location: %s\n",
+ hose->global_number,
+ eeh_pe_loc_get(phb_pe));
+ ret = EEH_NEXT_ERR_FENCED_PHB;
+ } else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) {
+ pr_info("EEH: PHB#%x informative error "
+ "detected, location: %s\n",
+ hose->global_number,
+ eeh_pe_loc_get(phb_pe));
+ pnv_eeh_get_phb_diag(phb_pe);
+ pnv_pci_dump_phb_diag_data(hose, phb_pe->data);
+ ret = EEH_NEXT_ERR_NONE;
+ }
+
+ break;
+ case OPAL_EEH_PE_ERROR:
+ /*
+ * If we can't find the corresponding PE, we
+ * just try to unfreeze.
+ */
+ if (pnv_eeh_get_pe(hose,
+ be64_to_cpu(frozen_pe_no), pe)) {
+ /* Try best to clear it */
+ pr_info("EEH: Clear non-existing PHB#%x-PE#%llx\n",
+ hose->global_number, frozen_pe_no);
+ pr_info("EEH: PHB location: %s\n",
+ eeh_pe_loc_get(phb_pe));
+ opal_pci_eeh_freeze_clear(phb->opal_id,
+ frozen_pe_no,
+ OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+ ret = EEH_NEXT_ERR_NONE;
+ } else if ((*pe)->state & EEH_PE_ISOLATED ||
+ eeh_pe_passed(*pe)) {
+ ret = EEH_NEXT_ERR_NONE;
+ } else {
+ pr_err("EEH: Frozen PE#%x "
+ "on PHB#%x detected\n",
+ (*pe)->addr,
+ (*pe)->phb->global_number);
+ pr_err("EEH: PE location: %s, "
+ "PHB location: %s\n",
+ eeh_pe_loc_get(*pe),
+ eeh_pe_loc_get(phb_pe));
+ ret = EEH_NEXT_ERR_FROZEN_PE;
+ }
+
+ break;
+ default:
+ pr_warn("%s: Unexpected error type %d\n",
+ __func__, be16_to_cpu(err_type));
+ }
- if (phb && phb->eeh_ops->next_error)
- return phb->eeh_ops->next_error(pe);
+ /*
+ * EEH core will try recover from fenced PHB or
+ * frozen PE. In the time for frozen PE, EEH core
+ * enable IO path for that before collecting logs,
+ * but it ruins the site. So we have to dump the
+ * log in advance here.
+ */
+ if ((ret == EEH_NEXT_ERR_FROZEN_PE ||
+ ret == EEH_NEXT_ERR_FENCED_PHB) &&
+ !((*pe)->state & EEH_PE_ISOLATED)) {
+ eeh_pe_state_mark(*pe, EEH_PE_ISOLATED);
+ pnv_eeh_get_phb_diag(*pe);
+
+ if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
+ pnv_pci_dump_phb_diag_data((*pe)->phb,
+ (*pe)->data);
+ }
- return -EEXIST;
+ /*
+ * We probably have the frozen parent PE out there and
+ * we need have to handle frozen parent PE firstly.
+ */
+ if (ret == EEH_NEXT_ERR_FROZEN_PE) {
+ parent_pe = (*pe)->parent;
+ while (parent_pe) {
+ /* Hit the ceiling ? */
+ if (parent_pe->type & EEH_PE_PHB)
+ break;
+
+ /* Frozen parent PE ? */
+ state = eeh_ops->get_state(parent_pe, NULL);
+ if (state > 0 &&
+ (state & active_flags) != active_flags)
+ *pe = parent_pe;
+
+ /* Next parent level */
+ parent_pe = parent_pe->parent;
+ }
+
+ /* We possibly migrate to another PE */
+ eeh_pe_state_mark(*pe, EEH_PE_ISOLATED);
+ }
+
+ /*
+ * If we have no errors on the specific PHB or only
+ * informative error there, we continue poking it.
+ * Otherwise, we need actions to be taken by upper
+ * layer.
+ */
+ if (ret > EEH_NEXT_ERR_INF)
+ break;
+ }
+
+ return ret;
}
-static int pnv_eeh_restore_config(struct device_node *dn)
+static int pnv_eeh_restore_config(struct pci_dn *pdn)
{
- struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+ struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
struct pnv_phb *phb;
s64 ret;
.name = "powernv",
.init = pnv_eeh_init,
.post_init = pnv_eeh_post_init,
- .of_probe = NULL,
- .dev_probe = pnv_eeh_dev_probe,
+ .probe = pnv_eeh_probe,
.set_option = pnv_eeh_set_option,
.get_pe_addr = pnv_eeh_get_pe_addr,
.get_state = pnv_eeh_get_state,
projects / cascardo / linux.git / blobdiff