*/
#include <linux/init.h>
-
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
#include <asm/io.h>
#include <asm/irq.h>
* 0xB8001000 : Common Memory
* 0xBA000000 : I/O
*/
-#if defined(CONFIG_IDE) && defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4)
/* SH4 can't access PCMCIA interface through P2 area.
* we must remap it with appropreate attribute bit of the page set.
* this part is based on Greg Banks' hd64465_ss.c implementation - Masahiro Abe */
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
#if defined(CONFIG_CF_AREA6)
#define slot_no 0
#define slot_no 1
#endif
-/* defined in mm/ioremap.c */
-extern void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags);
-
/* use this pointer to access to directly connected compact flash io area*/
void *cf_io_base;
return -ENOMEM;
}
/* printk("p3_ioremap(paddr=0x%08lx, psize=0x%08lx, prot=0x%08lx)=0x%08lx\n",
- paddrbase, psize, prot.pgprot, cf_io_base);*/
+ paddrbase, psize, prot.pgprot, cf_io_base);*/
/* XXX : do we need attribute and common-memory area also? */
/* You must have enabled the card, and set the level interrupt
* before reaching this point. Possibly in boot ROM or boot loader.
*/
-#if defined(CONFIG_IDE) && defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4)
allocate_cf_area();
#endif
#if defined(CONFIG_SH_UNKNOWN)
}
#if defined(CONFIG_SH_SOLUTION_ENGINE)
-#include <asm/se/se.h>
+#include <asm/se.h>
+#elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
+#include <asm/se7722.h>
+#endif
/*
- * SolutionEngine
+ * SolutionEngine Seriese
*
+ * about MS770xSE
* 0xB8400000 : Common Memory
* 0xB8500000 : Attribute
* 0xB8600000 : I/O
+ *
+ * about MS7722SE
+ * 0xB0400000 : Common Memory
+ * 0xB0500000 : Attribute
+ * 0xB0600000 : I/O
*/
+#if defined(CONFIG_SH_SOLUTION_ENGINE) || defined(CONFIG_SH_7722_SOLUTION_ENGINE)
static int __init cf_init_se(void)
{
if ((ctrl_inw(MRSHPC_CSR) & 0x000c) != 0)
* flag == COMMON/ATTRIBUTE/IO
*/
/* common window open */
- ctrl_outw(0x8a84, MRSHPC_MW0CR1);/* window 0xb8400000 */
+ ctrl_outw(0x8a84, MRSHPC_MW0CR1);
if((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
/* common mode & bus width 16bit SWAP = 1*/
ctrl_outw(0x0b00, MRSHPC_MW0CR2);
ctrl_outw(0x0300, MRSHPC_MW0CR2);
/* attribute window open */
- ctrl_outw(0x8a85, MRSHPC_MW1CR1);/* window 0xb8500000 */
+ ctrl_outw(0x8a85, MRSHPC_MW1CR1);
if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
/* attribute mode & bus width 16bit SWAP = 1*/
ctrl_outw(0x0a00, MRSHPC_MW1CR2);
ctrl_outw(0x0200, MRSHPC_MW1CR2);
/* I/O window open */
- ctrl_outw(0x8a86, MRSHPC_IOWCR1);/* I/O window 0xb8600000 */
+ ctrl_outw(0x8a86, MRSHPC_IOWCR1);
ctrl_outw(0x0008, MRSHPC_CDCR); /* I/O card mode */
if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
ctrl_outw(0x0a00, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1*/
int __init cf_init(void)
{
-#if defined(CONFIG_SH_SOLUTION_ENGINE)
- if (MACH_SE)
+ if( mach_is_se() || mach_is_7722se() ){
return cf_init_se();
-#endif
+ }
+
return cf_init_default();
}