/* Obtain the DSDT and FACS tables via their addresses within the FADT */
- acpi_tb_install_fixed_table((acpi_physical_address)acpi_gbl_FADT.Xdsdt,
- ACPI_SIG_DSDT, &acpi_gbl_dsdt_index);
+ acpi_tb_install_standard_table((acpi_physical_address)acpi_gbl_FADT.
+ Xdsdt,
+ ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL,
+ FALSE, TRUE, &acpi_gbl_dsdt_index);
/* If Hardware Reduced flag is set, there is no FACS */
if (!acpi_gbl_reduced_hardware) {
if (acpi_gbl_FADT.facs) {
- acpi_tb_install_fixed_table((acpi_physical_address)
- acpi_gbl_FADT.facs,
- ACPI_SIG_FACS,
- &acpi_gbl_facs_index);
+ acpi_tb_install_standard_table((acpi_physical_address)
+ acpi_gbl_FADT.facs,
+ ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL,
+ FALSE, TRUE,
+ &acpi_gbl_facs_index);
}
if (acpi_gbl_FADT.Xfacs) {
- acpi_tb_install_fixed_table((acpi_physical_address)
- acpi_gbl_FADT.Xfacs,
- ACPI_SIG_FACS,
- &acpi_gbl_xfacs_index);
+ acpi_tb_install_standard_table((acpi_physical_address)
+ acpi_gbl_FADT.Xfacs,
+ ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL,
+ FALSE, TRUE,
+ &acpi_gbl_xfacs_index);
}
}
}
u32 i;
/*
- * For ACPI 1.0 FADTs (revision 1 or 2), ensure that reserved fields which
+ * For ACPI 1.0 FADTs (revision 1), ensure that reserved fields which
* should be zero are indeed zero. This will workaround BIOSs that
* inadvertently place values in these fields.
*
* The ACPI 1.0 reserved fields that will be zeroed are the bytes located
* at offset 45, 55, 95, and the word located at offset 109, 110.
*
- * Note: The FADT revision value is unreliable. Only the length can be
- * trusted.
+ * Note: The FADT revision value is unreliable because of BIOS errors.
+ * The table length is instead used as the final word on the version.
+ *
+ * Note: FADT revision 3 is the ACPI 2.0 version of the FADT.
*/
- if (acpi_gbl_FADT.header.length <= ACPI_FADT_V2_SIZE) {
+ if (acpi_gbl_FADT.header.length <= ACPI_FADT_V3_SIZE) {
acpi_gbl_FADT.preferred_profile = 0;
acpi_gbl_FADT.pstate_control = 0;
acpi_gbl_FADT.cst_control = 0;
*
* Address32 zero, Address64 [don't care] - Use Address64
*
+ * No override: if acpi_gbl_use32_bit_fadt_addresses is FALSE, and:
* Address32 non-zero, Address64 zero - Copy/use Address32
* Address32 non-zero == Address64 non-zero - Use Address64
* Address32 non-zero != Address64 non-zero - Warning, use Address64
*
* Override: if acpi_gbl_use32_bit_fadt_addresses is TRUE, and:
+ * Address32 non-zero, Address64 zero - Copy/use Address32
+ * Address32 non-zero == Address64 non-zero - Copy/use Address32
* Address32 non-zero != Address64 non-zero - Warning, copy/use Address32
*
* Note: space_id is always I/O for 32-bit legacy address fields
*/
if (address32) {
- if (!address64->address) {
+ if (address64->address) {
+ if (address64->address != (u64)address32) {
+
+ /* Address mismatch */
+
+ ACPI_BIOS_WARNING((AE_INFO,
+ "32/64X address mismatch in FADT/%s: "
+ "0x%8.8X/0x%8.8X%8.8X, using %u-bit address",
+ name, address32,
+ ACPI_FORMAT_UINT64
+ (address64->address),
+ acpi_gbl_use32_bit_fadt_addresses
+ ? 32 : 64));
+ }
- /* 64-bit address is zero, use 32-bit address */
+ /*
+ * For each extended field, check for length mismatch
+ * between the legacy length field and the corresponding
+ * 64-bit X length field.
+ * Note: If the legacy length field is > 0xFF bits, ignore
+ * this check. (GPE registers can be larger than the
+ * 64-bit GAS structure can accomodate, 0xFF bits).
+ */
+ if ((ACPI_MUL_8(length) <= ACPI_UINT8_MAX) &&
+ (address64->bit_width !=
+ ACPI_MUL_8(length))) {
+ ACPI_BIOS_WARNING((AE_INFO,
+ "32/64X length mismatch in FADT/%s: %u/%u",
+ name,
+ ACPI_MUL_8(length),
+ address64->
+ bit_width));
+ }
+ }
+ /*
+ * Hardware register access code always uses the 64-bit fields.
+ * So if the 64-bit field is zero or is to be overridden,
+ * initialize it with the 32-bit fields.
+ * Note that when the 32-bit address favor is specified, the
+ * 64-bit fields are always re-initialized so that
+ * access_size/bit_width/bit_offset fields can be correctly
+ * configured to the values to trigger a 32-bit compatible
+ * access mode in the hardware register access code.
+ */
+ if (!address64->address
+ || acpi_gbl_use32_bit_fadt_addresses) {
acpi_tb_init_generic_address(address64,
ACPI_ADR_SPACE_SYSTEM_IO,
- *ACPI_ADD_PTR(u8,
- &acpi_gbl_FADT,
- fadt_info_table
- [i].
- length),
+ length,
(u64)address32,
name, flags);
- } else if (address64->address != (u64)address32) {
-
- /* Address mismatch */
-
- ACPI_BIOS_WARNING((AE_INFO,
- "32/64X address mismatch in FADT/%s: "
- "0x%8.8X/0x%8.8X%8.8X, using %u-bit address",
- name, address32,
- ACPI_FORMAT_UINT64
- (address64->address),
- acpi_gbl_use32_bit_fadt_addresses
- ? 32 : 64));
-
- if (acpi_gbl_use32_bit_fadt_addresses) {
-
- /* 32-bit address override */
-
- acpi_tb_init_generic_address(address64,
- ACPI_ADR_SPACE_SYSTEM_IO,
- *ACPI_ADD_PTR
- (u8,
- &acpi_gbl_FADT,
- fadt_info_table
- [i].
- length),
- (u64)
- address32,
- name,
- flags);
- }
}
}
- /*
- * For each extended field, check for length mismatch between the
- * legacy length field and the corresponding 64-bit X length field.
- * Note: If the legacy length field is > 0xFF bits, ignore this
- * check. (GPE registers can be larger than the 64-bit GAS structure
- * can accomodate, 0xFF bits).
- */
- if (address64->address &&
- (ACPI_MUL_8(length) <= ACPI_UINT8_MAX) &&
- (address64->bit_width != ACPI_MUL_8(length))) {
- ACPI_BIOS_WARNING((AE_INFO,
- "32/64X length mismatch in FADT/%s: %u/%u",
- name, ACPI_MUL_8(length),
- address64->bit_width));
- }
-
if (fadt_info_table[i].flags & ACPI_FADT_REQUIRED) {
/*
* Field is required (Pm1a_event, Pm1a_control).
projects / cascardo / linux.git / blobdiff