{
sdev->use_10_for_rw = 1;
sdev->use_10_for_ms = 1;
- sdev->no_report_opcodes = 1;
- sdev->no_write_same = 1;
/* Schedule policy is determined by ->qc_defer() callback and
* it needs to see every deferred qc. Set dev_blocked to 1 to
return 1;
}
+/**
+ * ata_format_dsm_trim_descr() - SATL Write Same to DSM Trim
+ * @cmd: SCSI command being translated
+ * @trmax: Maximum number of entries that will fit in sector_size bytes.
+ * @sector: Starting sector
+ * @count: Total Range of request in logical sectors
+ *
+ * Rewrite the WRITE SAME descriptor to be a DSM TRIM little-endian formatted
+ * descriptor.
+ *
+ * Upto 64 entries of the format:
+ * 63:48 Range Length
+ * 47:0 LBA
+ *
+ * Range Length of 0 is ignored.
+ * LBA's should be sorted order and not overlap.
+ *
+ * NOTE: this is the same format as ADD LBA(S) TO NV CACHE PINNED SET
+ *
+ * Return: Number of bytes copied into sglist.
+ */
+static size_t ata_format_dsm_trim_descr(struct scsi_cmnd *cmd, u32 trmax,
+ u64 sector, u32 count)
+{
+ struct scsi_device *sdp = cmd->device;
+ size_t len = sdp->sector_size;
+ size_t r;
+ __le64 *buf;
+ u32 i = 0;
+ unsigned long flags;
+
+ WARN_ON(len > ATA_SCSI_RBUF_SIZE);
+
+ if (len > ATA_SCSI_RBUF_SIZE)
+ len = ATA_SCSI_RBUF_SIZE;
+
+ spin_lock_irqsave(&ata_scsi_rbuf_lock, flags);
+ buf = ((void *)ata_scsi_rbuf);
+ memset(buf, 0, len);
+ while (i < trmax) {
+ u64 entry = sector |
+ ((u64)(count > 0xffff ? 0xffff : count) << 48);
+ buf[i++] = __cpu_to_le64(entry);
+ if (count <= 0xffff)
+ break;
+ count -= 0xffff;
+ sector += 0xffff;
+ }
+ r = sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, len);
+ spin_unlock_irqrestore(&ata_scsi_rbuf_lock, flags);
+
+ return r;
+}
+
+/**
+ * ata_format_dsm_trim_descr() - SATL Write Same to ATA SCT Write Same
+ * @cmd: SCSI command being translated
+ * @lba: Starting sector
+ * @num: Number of sectors to be zero'd.
+ *
+ * Rewrite the WRITE SAME payload to be an SCT Write Same formatted
+ * descriptor.
+ * NOTE: Writes a pattern (0's) in the foreground.
+ *
+ * Return: Number of bytes copied into sglist.
+ */
+static size_t ata_format_sct_write_same(struct scsi_cmnd *cmd, u64 lba, u64 num)
+{
+ struct scsi_device *sdp = cmd->device;
+ size_t len = sdp->sector_size;
+ size_t r;
+ u16 *buf;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ata_scsi_rbuf_lock, flags);
+ buf = ((void *)ata_scsi_rbuf);
+
+ put_unaligned_le16(0x0002, &buf[0]); /* SCT_ACT_WRITE_SAME */
+ put_unaligned_le16(0x0101, &buf[1]); /* WRITE PTRN FG */
+ put_unaligned_le64(lba, &buf[2]);
+ put_unaligned_le64(num, &buf[6]);
+ put_unaligned_le32(0u, &buf[10]); /* pattern */
+
+ WARN_ON(len > ATA_SCSI_RBUF_SIZE);
+
+ if (len > ATA_SCSI_RBUF_SIZE)
+ len = ATA_SCSI_RBUF_SIZE;
+
+ r = sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, len);
+ spin_unlock_irqrestore(&ata_scsi_rbuf_lock, flags);
+
+ return r;
+}
+
+/**
+ * ata_scsi_write_same_xlat() - SATL Write Same to ATA SCT Write Same
+ * @qc: Command to be translated
+ *
+ * Translate a SCSI WRITE SAME command to be either a DSM TRIM command or
+ * an SCT Write Same command.
+ * Based on WRITE SAME has the UNMAP flag
+ * When set translate to DSM TRIM
+ * When clear translate to SCT Write Same
+ */
static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
{
struct ata_taskfile *tf = &qc->tf;
struct scsi_cmnd *scmd = qc->scsicmd;
+ struct scsi_device *sdp = scmd->device;
+ size_t len = sdp->sector_size;
struct ata_device *dev = qc->dev;
const u8 *cdb = scmd->cmnd;
u64 block;
u32 n_block;
+ const u32 trmax = len >> 3;
u32 size;
- void *buf;
u16 fp;
u8 bp = 0xff;
+ u8 unmap = cdb[1] & 0x8;
/* we may not issue DMA commands if no DMA mode is set */
if (unlikely(!dev->dma_mode))
}
scsi_16_lba_len(cdb, &block, &n_block);
- /* for now we only support WRITE SAME with the unmap bit set */
- if (unlikely(!(cdb[1] & 0x8))) {
- fp = 1;
- bp = 3;
- goto invalid_fld;
+ if (unmap) {
+ /* If trim is not enabled the cmd is invalid. */
+ if ((dev->horkage & ATA_HORKAGE_NOTRIM) ||
+ !ata_id_has_trim(dev->id)) {
+ fp = 1;
+ bp = 3;
+ goto invalid_fld;
+ }
+ /* If the request is too large the cmd is invalid */
+ if (n_block > 0xffff * trmax) {
+ fp = 2;
+ goto invalid_fld;
+ }
+ } else {
+ /* If write same is not available the cmd is invalid */
+ if (!ata_id_sct_write_same(dev->id)) {
+ fp = 1;
+ bp = 3;
+ goto invalid_fld;
+ }
}
/*
if (!scsi_sg_count(scmd))
goto invalid_param_len;
- buf = page_address(sg_page(scsi_sglist(scmd)));
-
- if (n_block <= 65535 * ATA_MAX_TRIM_RNUM) {
- size = ata_set_lba_range_entries(buf, ATA_MAX_TRIM_RNUM, block, n_block);
- } else {
- fp = 2;
- goto invalid_fld;
- }
+ /*
+ * size must match sector size in bytes
+ * For DATA SET MANAGEMENT TRIM in ACS-2 nsect (aka count)
+ * is defined as number of 512 byte blocks to be transferred.
+ */
+ if (unmap) {
+ size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block);
+ if (size != len)
+ goto invalid_param_len;
- if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) {
- /* Newer devices support queued TRIM commands */
- tf->protocol = ATA_PROT_NCQ;
- tf->command = ATA_CMD_FPDMA_SEND;
- tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f;
- tf->nsect = qc->tag << 3;
- tf->hob_feature = (size / 512) >> 8;
- tf->feature = size / 512;
+ if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) {
+ /* Newer devices support queued TRIM commands */
+ tf->protocol = ATA_PROT_NCQ;
+ tf->command = ATA_CMD_FPDMA_SEND;
+ tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f;
+ tf->nsect = qc->tag << 3;
+ tf->hob_feature = (size / 512) >> 8;
+ tf->feature = size / 512;
- tf->auxiliary = 1;
+ tf->auxiliary = 1;
+ } else {
+ tf->protocol = ATA_PROT_DMA;
+ tf->hob_feature = 0;
+ tf->feature = ATA_DSM_TRIM;
+ tf->hob_nsect = (size / 512) >> 8;
+ tf->nsect = size / 512;
+ tf->command = ATA_CMD_DSM;
+ }
} else {
- tf->protocol = ATA_PROT_DMA;
+ size = ata_format_sct_write_same(scmd, block, n_block);
+ if (size != len)
+ goto invalid_param_len;
+
tf->hob_feature = 0;
- tf->feature = ATA_DSM_TRIM;
- tf->hob_nsect = (size / 512) >> 8;
- tf->nsect = size / 512;
- tf->command = ATA_CMD_DSM;
+ tf->feature = 0;
+ tf->hob_nsect = 0;
+ tf->nsect = 1;
+ tf->lbah = 0;
+ tf->lbam = 0;
+ tf->lbal = ATA_CMD_STANDBYNOW1;
+ tf->hob_lbah = 0;
+ tf->hob_lbam = 0;
+ tf->hob_lbal = 0;
+ tf->device = ATA_CMD_STANDBYNOW1;
+ tf->protocol = ATA_PROT_DMA;
+ tf->command = ATA_CMD_WRITE_LOG_DMA_EXT;
+ if (unlikely(dev->flags & ATA_DFLAG_PIO))
+ tf->command = ATA_CMD_WRITE_LOG_EXT;
}
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 |
return 1;
}
+/**
+ * ata_scsiop_maint_in - Simulate a subset of MAINTENANCE_IN
+ * @args: device MAINTENANCE_IN data / SCSI command of interest.
+ * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
+ *
+ * Yields a subset to satisfy scsi_report_opcode()
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+static unsigned int ata_scsiop_maint_in(struct ata_scsi_args *args, u8 *rbuf)
+{
+ struct ata_device *dev = args->dev;
+ u8 *cdb = args->cmd->cmnd;
+ u8 supported = 0;
+ unsigned int err = 0;
+
+ if (cdb[2] != 1) {
+ ata_dev_warn(dev, "invalid command format %d\n", cdb[2]);
+ err = 2;
+ goto out;
+ }
+ switch (cdb[3]) {
+ case INQUIRY:
+ case MODE_SENSE:
+ case MODE_SENSE_10:
+ case READ_CAPACITY:
+ case SERVICE_ACTION_IN_16:
+ case REPORT_LUNS:
+ case REQUEST_SENSE:
+ case SYNCHRONIZE_CACHE:
+ case REZERO_UNIT:
+ case SEEK_6:
+ case SEEK_10:
+ case TEST_UNIT_READY:
+ case SEND_DIAGNOSTIC:
+ case MAINTENANCE_IN:
+ case READ_6:
+ case READ_10:
+ case READ_16:
+ case WRITE_6:
+ case WRITE_10:
+ case WRITE_16:
+ case ATA_12:
+ case ATA_16:
+ case VERIFY:
+ case VERIFY_16:
+ case MODE_SELECT:
+ case MODE_SELECT_10:
+ case START_STOP:
+ supported = 3;
+ break;
+ case WRITE_SAME_16:
+ if (!ata_id_sct_write_same(dev->id))
+ break;
+ /* fallthrough: if SCT ... only enable for ZBC */
+ case ZBC_IN:
+ case ZBC_OUT:
+ if (ata_id_zoned_cap(dev->id) ||
+ dev->class == ATA_DEV_ZAC)
+ supported = 3;
+ break;
+ default:
+ break;
+ }
+out:
+ rbuf[1] = supported; /* supported */
+ return err;
+}
+
/**
* ata_scsi_report_zones_complete - convert ATA output
* @qc: command structure returning the data
{
struct ata_taskfile *tf = &qc->tf;
struct ata_device *dev = qc->dev;
- char mpage[CACHE_MPAGE_LEN];
+ u8 mpage[CACHE_MPAGE_LEN];
u8 wce;
int i;
const u8 *buf, int len, u16 *fp)
{
struct ata_device *dev = qc->dev;
- char mpage[CONTROL_MPAGE_LEN];
+ u8 mpage[CONTROL_MPAGE_LEN];
u8 d_sense;
int i;
dev->flags |= ATA_DFLAG_D_SENSE;
else
dev->flags &= ~ATA_DFLAG_D_SENSE;
- qc->scsicmd->result = SAM_STAT_GOOD;
- qc->scsicmd->scsi_done(qc->scsicmd);
return 0;
}
if (ata_mselect_control(qc, p, pg_len, &fp) < 0) {
fp += hdr_len + bd_len;
goto invalid_param;
+ } else {
+ goto skip; /* No ATA command to send */
}
break;
default: /* invalid page code */
ata_scsi_invalid_field(dev, cmd, 1);
break;
+ case MAINTENANCE_IN:
+ if (scsicmd[1] == MI_REPORT_SUPPORTED_OPERATION_CODES)
+ ata_scsi_rbuf_fill(&args, ata_scsiop_maint_in);
+ else
+ ata_scsi_invalid_field(dev, cmd, 1);
+ break;
+
/* all other commands */
default:
ata_scsi_set_sense(dev, cmd, ILLEGAL_REQUEST, 0x20, 0x0);
shost->max_lun = 1;
shost->max_channel = 1;
shost->max_cmd_len = 16;
- shost->no_write_same = 1;
/* Schedule policy is determined by ->qc_defer()
* callback and it needs to see every deferred qc.
projects / cascardo / linux.git / blobdiff