struct mgsl_struct {
int magic;
- int flags;
- int count; /* count of opens */
+ struct tty_port port;
int line;
int hw_version;
- unsigned short close_delay;
- unsigned short closing_wait; /* time to wait before closing */
struct mgsl_icount icount;
- struct tty_struct *tty;
int timeout;
int x_char; /* xon/xoff character */
- int blocked_open; /* # of blocked opens */
u16 read_status_mask;
u16 ignore_status_mask;
unsigned char *xmit_buf;
int xmit_tail;
int xmit_cnt;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
-
wait_queue_head_t status_event_wait_q;
wait_queue_head_t event_wait_q;
struct timer_list tx_timer; /* HDLC transmit timeout timer */
/* generic HDLC device parts */
int netcount;
- int dosyncppp;
spinlock_t netlock;
#if SYNCLINK_GENERIC_HDLC
static int dma[MAX_ISA_DEVICES];
static int debug_level;
static int maxframe[MAX_TOTAL_DEVICES];
-static int dosyncppp[MAX_TOTAL_DEVICES];
static int txdmabufs[MAX_TOTAL_DEVICES];
static int txholdbufs[MAX_TOTAL_DEVICES];
module_param_array(dma, int, NULL, 0);
module_param(debug_level, int, 0);
module_param_array(maxframe, int, NULL, 0);
-module_param_array(dosyncppp, int, NULL, 0);
module_param_array(txdmabufs, int, NULL, 0);
module_param_array(txholdbufs, int, NULL, 0);
return;
ld = tty_ldisc_ref(tty);
if (ld) {
- if (ld->receive_buf)
- ld->receive_buf(tty, data, flags, count);
+ if (ld->ops->receive_buf)
+ ld->ops->receive_buf(tty, data, flags, count);
tty_ldisc_deref(ld);
}
}
static void mgsl_bh_transmit(struct mgsl_struct *info)
{
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
unsigned long flags;
if ( debug_level >= DEBUG_LEVEL_BH )
else
#endif
{
- if (info->tty->stopped || info->tty->hw_stopped) {
+ if (info->port.tty->stopped || info->port.tty->hw_stopped) {
usc_stop_transmitter(info);
return;
}
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
- if ( (info->flags & ASYNC_CHECK_CD) &&
+ if ( (info->port.flags & ASYNC_CHECK_CD) &&
(status & MISCSTATUS_DCD_LATCHED) ) {
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s CD now %s...", info->device_name,
(status & MISCSTATUS_DCD) ? "on" : "off");
if (status & MISCSTATUS_DCD)
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
else {
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("doing serial hangup...");
- if (info->tty)
- tty_hangup(info->tty);
+ if (info->port.tty)
+ tty_hangup(info->port.tty);
}
}
- if ( (info->flags & ASYNC_CTS_FLOW) &&
+ if ( (info->port.flags & ASYNC_CTS_FLOW) &&
(status & MISCSTATUS_CTS_LATCHED) ) {
- if (info->tty->hw_stopped) {
+ if (info->port.tty->hw_stopped) {
if (status & MISCSTATUS_CTS) {
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("CTS tx start...");
- if (info->tty)
- info->tty->hw_stopped = 0;
+ if (info->port.tty)
+ info->port.tty->hw_stopped = 0;
usc_start_transmitter(info);
info->pending_bh |= BH_TRANSMIT;
return;
if (!(status & MISCSTATUS_CTS)) {
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("CTS tx stop...");
- if (info->tty)
- info->tty->hw_stopped = 1;
+ if (info->port.tty)
+ info->port.tty->hw_stopped = 1;
usc_stop_transmitter(info);
}
}
usc_ClearIrqPendingBits( info, TRANSMIT_DATA );
- if (info->tty->stopped || info->tty->hw_stopped) {
+ if (info->port.tty->stopped || info->port.tty->hw_stopped) {
usc_stop_transmitter(info);
return;
}
u16 status;
int work = 0;
unsigned char DataByte;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
struct mgsl_icount *icount = &info->icount;
if ( debug_level >= DEBUG_LEVEL_ISR )
if (status & RXSTATUS_BREAK_RECEIVED) {
flag = TTY_BREAK;
- if (info->flags & ASYNC_SAK)
+ if (info->port.flags & ASYNC_SAK)
do_SAK(tty);
} else if (status & RXSTATUS_PARITY_ERROR)
flag = TTY_PARITY;
if ( debug_level >= DEBUG_LEVEL_INFO )
printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name);
- if (info->flags & ASYNC_INITIALIZED)
+ if (info->port.flags & ASYNC_INITIALIZED)
return 0;
if (!info->xmit_buf) {
retval = mgsl_adapter_test(info);
if ( retval ) {
- if (capable(CAP_SYS_ADMIN) && info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (capable(CAP_SYS_ADMIN) && info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
mgsl_release_resources(info);
return retval;
}
/* program hardware for current parameters */
mgsl_change_params(info);
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->flags |= ASYNC_INITIALIZED;
+ info->port.flags |= ASYNC_INITIALIZED;
return 0;
{
unsigned long flags;
- if (!(info->flags & ASYNC_INITIALIZED))
+ if (!(info->port.flags & ASYNC_INITIALIZED))
return;
if (debug_level >= DEBUG_LEVEL_INFO)
/* on the ISA adapter. This has no effect for the PCI adapter */
usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
- if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
+ if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
usc_set_serial_signals(info);
}
mgsl_release_resources(info);
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->flags &= ~ASYNC_INITIALIZED;
+ info->port.flags &= ~ASYNC_INITIALIZED;
} /* end of shutdown() */
usc_EnableInterrupts(info, IO_PIN);
usc_get_serial_signals(info);
- if (info->netcount || info->tty->termios->c_cflag & CREAD)
+ if (info->netcount || info->port.tty->termios->c_cflag & CREAD)
usc_start_receiver(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
unsigned cflag;
int bits_per_char;
- if (!info->tty || !info->tty->termios)
+ if (!info->port.tty || !info->port.tty->termios)
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_change_params(%s)\n",
__FILE__,__LINE__, info->device_name );
- cflag = info->tty->termios->c_cflag;
+ cflag = info->port.tty->termios->c_cflag;
/* if B0 rate (hangup) specified then negate DTR and RTS */
/* otherwise assert DTR and RTS */
* current data rate.
*/
if (info->params.data_rate <= 460800)
- info->params.data_rate = tty_get_baud_rate(info->tty);
+ info->params.data_rate = tty_get_baud_rate(info->port.tty);
if ( info->params.data_rate ) {
info->timeout = (32*HZ*bits_per_char) /
info->timeout += HZ/50; /* Add .02 seconds of slop */
if (cflag & CRTSCTS)
- info->flags |= ASYNC_CTS_FLOW;
+ info->port.flags |= ASYNC_CTS_FLOW;
else
- info->flags &= ~ASYNC_CTS_FLOW;
+ info->port.flags &= ~ASYNC_CTS_FLOW;
if (cflag & CLOCAL)
- info->flags &= ~ASYNC_CHECK_CD;
+ info->port.flags &= ~ASYNC_CHECK_CD;
else
- info->flags |= ASYNC_CHECK_CD;
+ info->port.flags |= ASYNC_CHECK_CD;
/* process tty input control flags */
info->read_status_mask = RXSTATUS_OVERRUN;
- if (I_INPCK(info->tty))
+ if (I_INPCK(info->port.tty))
info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
- if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+ if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;
- if (I_IGNPAR(info->tty))
+ if (I_IGNPAR(info->port.tty))
info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
- if (I_IGNBRK(info->tty)) {
+ if (I_IGNBRK(info->port.tty)) {
info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED;
/* If ignoring parity and break indicators, ignore
* overruns too. (For real raw support).
*/
- if (I_IGNPAR(info->tty))
+ if (I_IGNPAR(info->port.tty))
info->ignore_status_mask |= RXSTATUS_OVERRUN;
}
*
* Arguments: tty pointer to tty instance data
* break_state -1=set break condition, 0=clear
- * Return Value: None
+ * Return Value: error code
*/
-static void mgsl_break(struct tty_struct *tty, int break_state)
+static int mgsl_break(struct tty_struct *tty, int break_state)
{
struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data;
unsigned long flags;
__FILE__,__LINE__, info->device_name, break_state);
if (mgsl_paranoia_check(info, tty->name, "mgsl_break"))
- return;
+ return -EINVAL;
spin_lock_irqsave(&info->irq_spinlock,flags);
if (break_state == -1)
else
usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7));
spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ return 0;
} /* end of mgsl_break() */
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_close(%s) entry, count=%d\n",
- __FILE__,__LINE__, info->device_name, info->count);
+ __FILE__,__LINE__, info->device_name, info->port.count);
- if (!info->count)
+ if (!info->port.count)
return;
if (tty_hung_up_p(filp))
goto cleanup;
- if ((tty->count == 1) && (info->count != 1)) {
+ if ((tty->count == 1) && (info->port.count != 1)) {
/*
* tty->count is 1 and the tty structure will be freed.
- * info->count should be one in this case.
+ * info->port.count should be one in this case.
* if it's not, correct it so that the port is shutdown.
*/
printk("mgsl_close: bad refcount; tty->count is 1, "
- "info->count is %d\n", info->count);
- info->count = 1;
+ "info->port.count is %d\n", info->port.count);
+ info->port.count = 1;
}
- info->count--;
+ info->port.count--;
/* if at least one open remaining, leave hardware active */
- if (info->count)
+ if (info->port.count)
goto cleanup;
- info->flags |= ASYNC_CLOSING;
+ info->port.flags |= ASYNC_CLOSING;
/* set tty->closing to notify line discipline to
* only process XON/XOFF characters. Only the N_TTY
/* wait for transmit data to clear all layers */
- if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
+ if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) {
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_close(%s) calling tty_wait_until_sent\n",
__FILE__,__LINE__, info->device_name );
- tty_wait_until_sent(tty, info->closing_wait);
+ tty_wait_until_sent(tty, info->port.closing_wait);
}
- if (info->flags & ASYNC_INITIALIZED)
+ if (info->port.flags & ASYNC_INITIALIZED)
mgsl_wait_until_sent(tty, info->timeout);
mgsl_flush_buffer(tty);
shutdown(info);
tty->closing = 0;
- info->tty = NULL;
+ info->port.tty = NULL;
- if (info->blocked_open) {
- if (info->close_delay) {
- msleep_interruptible(jiffies_to_msecs(info->close_delay));
+ if (info->port.blocked_open) {
+ if (info->port.close_delay) {
+ msleep_interruptible(jiffies_to_msecs(info->port.close_delay));
}
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
}
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
+ wake_up_interruptible(&info->port.close_wait);
cleanup:
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__,
- tty->driver->name, info->count);
+ tty->driver->name, info->port.count);
} /* end of mgsl_close() */
if (mgsl_paranoia_check(info, tty->name, "mgsl_wait_until_sent"))
return;
- if (!(info->flags & ASYNC_INITIALIZED))
+ if (!(info->port.flags & ASYNC_INITIALIZED))
goto exit;
orig_jiffies = jiffies;
mgsl_flush_buffer(tty);
shutdown(info);
- info->count = 0;
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->tty = NULL;
+ info->port.count = 0;
+ info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->port.tty = NULL;
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
} /* end of mgsl_hangup() */
if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
/* nonblock mode is set or port is not enabled */
- info->flags |= ASYNC_NORMAL_ACTIVE;
+ info->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
/* Wait for carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
+ * this loop, info->port.count is dropped by one, so that
* mgsl_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&info->open_wait, &wait);
+ add_wait_queue(&info->port.open_wait, &wait);
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready before block on %s count=%d\n",
- __FILE__,__LINE__, tty->driver->name, info->count );
+ __FILE__,__LINE__, tty->driver->name, info->port.count );
spin_lock_irqsave(&info->irq_spinlock, flags);
if (!tty_hung_up_p(filp)) {
extra_count = true;
- info->count--;
+ info->port.count--;
}
spin_unlock_irqrestore(&info->irq_spinlock, flags);
- info->blocked_open++;
+ info->port.blocked_open++;
while (1) {
if (tty->termios->c_cflag & CBAUD) {
set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
- retval = (info->flags & ASYNC_HUP_NOTIFY) ?
+ if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){
+ retval = (info->port.flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS;
break;
}
usc_get_serial_signals(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
- if (!(info->flags & ASYNC_CLOSING) &&
+ if (!(info->port.flags & ASYNC_CLOSING) &&
(do_clocal || (info->serial_signals & SerialSignal_DCD)) ) {
break;
}
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready blocking on %s count=%d\n",
- __FILE__,__LINE__, tty->driver->name, info->count );
+ __FILE__,__LINE__, tty->driver->name, info->port.count );
schedule();
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->open_wait, &wait);
+ remove_wait_queue(&info->port.open_wait, &wait);
if (extra_count)
- info->count++;
- info->blocked_open--;
+ info->port.count++;
+ info->port.blocked_open--;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
- __FILE__,__LINE__, tty->driver->name, info->count );
+ __FILE__,__LINE__, tty->driver->name, info->port.count );
if (!retval)
- info->flags |= ASYNC_NORMAL_ACTIVE;
+ info->port.flags |= ASYNC_NORMAL_ACTIVE;
return retval;
return -ENODEV;
tty->driver_data = info;
- info->tty = tty;
+ info->port.tty = tty;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_open(%s), old ref count = %d\n",
- __FILE__,__LINE__,tty->driver->name, info->count);
+ __FILE__,__LINE__,tty->driver->name, info->port.count);
/* If port is closing, signal caller to try again */
- if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
- if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
- retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
+ if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
+ if (info->port.flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->port.close_wait);
+ retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
goto cleanup;
}
- info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
spin_lock_irqsave(&info->netlock, flags);
if (info->netcount) {
spin_unlock_irqrestore(&info->netlock, flags);
goto cleanup;
}
- info->count++;
+ info->port.count++;
spin_unlock_irqrestore(&info->netlock, flags);
- if (info->count == 1) {
+ if (info->port.count == 1) {
/* 1st open on this device, init hardware */
retval = startup(info);
if (retval < 0)
cleanup:
if (retval) {
if (tty->count == 1)
- info->tty = NULL; /* tty layer will release tty struct */
- if(info->count)
- info->count--;
+ info->port.tty = NULL; /* tty layer will release tty struct */
+ if(info->port.count)
+ info->port.count--;
}
return retval;
if (info->line < MAX_TOTAL_DEVICES) {
if (maxframe[info->line])
info->max_frame_size = maxframe[info->line];
- info->dosyncppp = dosyncppp[info->line];
if (txdmabufs[info->line]) {
info->num_tx_dma_buffers = txdmabufs[info->line];
if (!info) {
printk("Error can't allocate device instance data\n");
} else {
+ tty_port_init(&info->port);
info->magic = MGSL_MAGIC;
INIT_WORK(&info->task, mgsl_bh_handler);
info->max_frame_size = 4096;
- info->close_delay = 5*HZ/10;
- info->closing_wait = 30*HZ;
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
+ info->port.close_delay = 5*HZ/10;
+ info->port.closing_wait = 30*HZ;
init_waitqueue_head(&info->status_event_wait_q);
init_waitqueue_head(&info->event_wait_q);
spin_lock_init(&info->irq_spinlock);
unsigned int framesize = 0;
bool ReturnCode = false;
unsigned long flags;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
bool return_frame = false;
/*
unsigned int framesize = 0;
bool ReturnCode = false;
unsigned long flags;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
/*
* current_rx_buffer points to the 1st buffer of the next available
unsigned short new_crctype;
/* return error if TTY interface open */
- if (info->count)
+ if (info->port.count)
return -EBUSY;
switch (encoding)
/* arbitrate between network and tty opens */
spin_lock_irqsave(&info->netlock, flags);
- if (info->count != 0 || info->netcount != 0) {
+ if (info->port.count != 0 || info->netcount != 0) {
printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
spin_unlock_irqrestore(&info->netlock, flags);
return -EBUSY;
printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
/* return error if TTY interface open */
- if (info->count)
+ if (info->port.count)
return -EBUSY;
if (cmd != SIOCWANDEV)
projects / cascardo / linux.git / blobdiff