#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <asm-generic/bug.h>
#include <asm/mach/irq.h>
-#define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START)
-
enum mxc_gpio_hwtype {
IMX1_GPIO, /* runs on i.mx1 */
IMX21_GPIO, /* runs on i.mx21 and i.mx27 */
void __iomem *base;
int irq;
int irq_high;
- int virtual_irq_start;
+ struct irq_domain *domain;
struct bgpio_chip bgc;
u32 both_edges;
};
static int gpio_set_irq_type(struct irq_data *d, u32 type)
{
- u32 gpio = irq_to_gpio(d->irq);
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct mxc_gpio_port *port = gc->private;
u32 bit, val;
+ u32 gpio_idx = d->hwirq;
+ u32 gpio = port->bgc.gc.base + gpio_idx;
int edge;
void __iomem *reg = port->base;
- port->both_edges &= ~(1 << (gpio & 31));
+ port->both_edges &= ~(1 << gpio_idx);
switch (type) {
case IRQ_TYPE_EDGE_RISING:
edge = GPIO_INT_RISE_EDGE;
edge = GPIO_INT_HIGH_LEV;
pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
}
- port->both_edges |= 1 << (gpio & 31);
+ port->both_edges |= 1 << gpio_idx;
}
break;
case IRQ_TYPE_LEVEL_LOW:
if (GPIO_EDGE_SEL >= 0) {
val = readl(port->base + GPIO_EDGE_SEL);
if (edge == GPIO_INT_BOTH_EDGES)
- writel(val | (1 << (gpio & 0x1f)),
+ writel(val | (1 << gpio_idx),
port->base + GPIO_EDGE_SEL);
else
- writel(val & ~(1 << (gpio & 0x1f)),
+ writel(val & ~(1 << gpio_idx),
port->base + GPIO_EDGE_SEL);
}
if (edge != GPIO_INT_BOTH_EDGES) {
- reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
- bit = gpio & 0xf;
+ reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* lower or upper register */
+ bit = gpio_idx & 0xf;
val = readl(reg) & ~(0x3 << (bit << 1));
writel(val | (edge << (bit << 1)), reg);
}
- writel(1 << (gpio & 0x1f), port->base + GPIO_ISR);
+ writel(1 << gpio_idx, port->base + GPIO_ISR);
return 0;
}
/* handle 32 interrupts in one status register */
static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
{
- u32 gpio_irq_no_base = port->virtual_irq_start;
-
while (irq_stat != 0) {
int irqoffset = fls(irq_stat) - 1;
if (port->both_edges & (1 << irqoffset))
mxc_flip_edge(port, irqoffset);
- generic_handle_irq(gpio_irq_no_base + irqoffset);
+ generic_handle_irq(irq_find_mapping(port->domain, irqoffset));
irq_stat &= ~(1 << irqoffset);
}
*/
static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
{
- u32 gpio = irq_to_gpio(d->irq);
- u32 gpio_idx = gpio & 0x1F;
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct mxc_gpio_port *port = gc->private;
+ u32 gpio_idx = d->hwirq;
if (enable) {
if (port->irq_high && (gpio_idx >= 16))
return 0;
}
-static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port)
+static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
- gc = irq_alloc_generic_chip("gpio-mxc", 1, port->virtual_irq_start,
+ gc = irq_alloc_generic_chip("gpio-mxc", 1, irq_base,
port->base, handle_level_irq);
gc->private = port;
struct mxc_gpio_port *port =
container_of(bgc, struct mxc_gpio_port, bgc);
- return port->virtual_irq_start + offset;
+ return irq_find_mapping(port->domain, offset);
}
static int __devinit mxc_gpio_probe(struct platform_device *pdev)
struct device_node *np = pdev->dev.of_node;
struct mxc_gpio_port *port;
struct resource *iores;
+ int irq_base;
int err;
mxc_gpio_get_hw(pdev);
writel(~0, port->base + GPIO_ISR);
if (mxc_gpio_hwtype == IMX21_GPIO) {
- /* setup one handler for all GPIO interrupts */
- if (pdev->id == 0)
- irq_set_chained_handler(port->irq,
- mx2_gpio_irq_handler);
+ /*
+ * Setup one handler for all GPIO interrupts. Actually setting
+ * the handler is needed only once, but doing it for every port
+ * is more robust and easier.
+ */
+ irq_set_chained_handler(port->irq, mx2_gpio_irq_handler);
} else {
/* setup one handler for each entry */
irq_set_chained_handler(port->irq, mx3_gpio_irq_handler);
if (err)
goto out_bgpio_remove;
- /*
- * In dt case, we use gpio number range dynamically
- * allocated by gpio core.
- */
- port->virtual_irq_start = MXC_GPIO_IRQ_START + (np ? port->bgc.gc.base :
- pdev->id * 32);
+ irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
+ if (irq_base < 0) {
+ err = irq_base;
+ goto out_gpiochip_remove;
+ }
+
+ port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+ if (!port->domain) {
+ err = -ENODEV;
+ goto out_irqdesc_free;
+ }
/* gpio-mxc can be a generic irq chip */
- mxc_gpio_init_gc(port);
+ mxc_gpio_init_gc(port, irq_base);
list_add_tail(&port->node, &mxc_gpio_ports);
return 0;
+out_irqdesc_free:
+ irq_free_descs(irq_base, 32);
+out_gpiochip_remove:
+ WARN_ON(gpiochip_remove(&port->bgc.gc) < 0);
out_bgpio_remove:
bgpio_remove(&port->bgc);
out_iounmap:
projects / cascardo / linux.git / blobdiff