{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *encoder;
+ int i;
u32 val, final;
bool has_lvds = false;
bool has_cpu_edp = false;
bool has_panel = false;
bool has_ck505 = false;
bool can_ssc = false;
+ bool using_ssc_source = false;
/* We need to take the global config into account */
for_each_intel_encoder(dev, encoder) {
can_ssc = true;
}
- DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d\n",
- has_panel, has_lvds, has_ck505);
+ /* Check if any DPLLs are using the SSC source */
+ for (i = 0; i < dev_priv->num_shared_dpll; i++) {
+ u32 temp = I915_READ(PCH_DPLL(i));
+
+ if (!(temp & DPLL_VCO_ENABLE))
+ continue;
+
+ if ((temp & PLL_REF_INPUT_MASK) ==
+ PLLB_REF_INPUT_SPREADSPECTRUMIN) {
+ using_ssc_source = true;
+ break;
+ }
+ }
+
+ DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d using_ssc_source %d\n",
+ has_panel, has_lvds, has_ck505, using_ssc_source);
/* Ironlake: try to setup display ref clock before DPLL
* enabling. This is only under driver's control after
final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
} else
final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
- } else {
- final |= DREF_SSC_SOURCE_DISABLE;
- final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+ } else if (using_ssc_source) {
+ final |= DREF_SSC_SOURCE_ENABLE;
+ final |= DREF_SSC1_ENABLE;
}
if (final == val)
POSTING_READ(PCH_DREF_CONTROL);
udelay(200);
} else {
- DRM_DEBUG_KMS("Disabling SSC entirely\n");
+ DRM_DEBUG_KMS("Disabling CPU source output\n");
val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
POSTING_READ(PCH_DREF_CONTROL);
udelay(200);
- /* Turn off the SSC source */
- val &= ~DREF_SSC_SOURCE_MASK;
- val |= DREF_SSC_SOURCE_DISABLE;
+ if (!using_ssc_source) {
+ DRM_DEBUG_KMS("Disabling SSC source\n");
- /* Turn off SSC1 */
- val &= ~DREF_SSC1_ENABLE;
+ /* Turn off the SSC source */
+ val &= ~DREF_SSC_SOURCE_MASK;
+ val |= DREF_SSC_SOURCE_DISABLE;
- I915_WRITE(PCH_DREF_CONTROL, val);
- POSTING_READ(PCH_DREF_CONTROL);
- udelay(200);
+ /* Turn off SSC1 */
+ val &= ~DREF_SSC1_ENABLE;
+
+ I915_WRITE(PCH_DREF_CONTROL, val);
+ POSTING_READ(PCH_DREF_CONTROL);
+ udelay(200);
+ }
}
BUG_ON(val != final);
tmp |= FDI_MPHY_IOSFSB_RESET_CTL;
I915_WRITE(SOUTH_CHICKEN2, tmp);
- if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) &
- FDI_MPHY_IOSFSB_RESET_STATUS, 100))
+ if (wait_for_us(I915_READ(SOUTH_CHICKEN2) &
+ FDI_MPHY_IOSFSB_RESET_STATUS, 100))
DRM_ERROR("FDI mPHY reset assert timeout\n");
tmp = I915_READ(SOUTH_CHICKEN2);
tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
I915_WRITE(SOUTH_CHICKEN2, tmp);
- if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) &
- FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100))
+ if (wait_for_us((I915_READ(SOUTH_CHICKEN2) &
+ FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100))
DRM_ERROR("FDI mPHY reset de-assert timeout\n");
}
val |= LCPLL_CD_SOURCE_FCLK;
I915_WRITE(LCPLL_CTL, val);
- if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
- LCPLL_CD_SOURCE_FCLK_DONE, 1))
+ if (wait_for_us(I915_READ(LCPLL_CTL) &
+ LCPLL_CD_SOURCE_FCLK_DONE, 1))
DRM_ERROR("Switching to FCLK failed\n");
val = I915_READ(LCPLL_CTL);
val &= ~LCPLL_CD_SOURCE_FCLK;
I915_WRITE(LCPLL_CTL, val);
- if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
- LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
+ if (wait_for_us((I915_READ(LCPLL_CTL) &
+ LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
DRM_ERROR("Switching back to LCPLL failed\n");
}
ret = intel_color_check(crtc, crtc_state);
if (ret)
return ret;
+
+ /*
+ * Changing color management on Intel hardware is
+ * handled as part of planes update.
+ */
+ crtc_state->planes_changed = true;
}
ret = 0;
if (I915_READ(PCH_DP_D) & DP_DETECTED)
intel_dp_init(dev, PCH_DP_D, PORT_D);
} else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
+ bool has_edp, has_port;
+
/*
* The DP_DETECTED bit is the latched state of the DDC
* SDA pin at boot. However since eDP doesn't require DDC
* Thus we can't rely on the DP_DETECTED bit alone to detect
* eDP ports. Consult the VBT as well as DP_DETECTED to
* detect eDP ports.
+ *
+ * Sadly the straps seem to be missing sometimes even for HDMI
+ * ports (eg. on Voyo V3 - CHT x7-Z8700), so check both strap
+ * and VBT for the presence of the port. Additionally we can't
+ * trust the port type the VBT declares as we've seen at least
+ * HDMI ports that the VBT claim are DP or eDP.
*/
- if (I915_READ(VLV_HDMIB) & SDVO_DETECTED &&
- !intel_dp_is_edp(dev, PORT_B))
+ has_edp = intel_dp_is_edp(dev, PORT_B);
+ has_port = intel_bios_is_port_present(dev_priv, PORT_B);
+ if (I915_READ(VLV_DP_B) & DP_DETECTED || has_port)
+ has_edp &= intel_dp_init(dev, VLV_DP_B, PORT_B);
+ if ((I915_READ(VLV_HDMIB) & SDVO_DETECTED || has_port) && !has_edp)
intel_hdmi_init(dev, VLV_HDMIB, PORT_B);
- if (I915_READ(VLV_DP_B) & DP_DETECTED ||
- intel_dp_is_edp(dev, PORT_B))
- intel_dp_init(dev, VLV_DP_B, PORT_B);
- if (I915_READ(VLV_HDMIC) & SDVO_DETECTED &&
- !intel_dp_is_edp(dev, PORT_C))
+ has_edp = intel_dp_is_edp(dev, PORT_C);
+ has_port = intel_bios_is_port_present(dev_priv, PORT_C);
+ if (I915_READ(VLV_DP_C) & DP_DETECTED || has_port)
+ has_edp &= intel_dp_init(dev, VLV_DP_C, PORT_C);
+ if ((I915_READ(VLV_HDMIC) & SDVO_DETECTED || has_port) && !has_edp)
intel_hdmi_init(dev, VLV_HDMIC, PORT_C);
- if (I915_READ(VLV_DP_C) & DP_DETECTED ||
- intel_dp_is_edp(dev, PORT_C))
- intel_dp_init(dev, VLV_DP_C, PORT_C);
if (IS_CHERRYVIEW(dev)) {
- /* eDP not supported on port D, so don't check VBT */
- if (I915_READ(CHV_HDMID) & SDVO_DETECTED)
- intel_hdmi_init(dev, CHV_HDMID, PORT_D);
- if (I915_READ(CHV_DP_D) & DP_DETECTED)
+ /*
+ * eDP not supported on port D,
+ * so no need to worry about it
+ */
+ has_port = intel_bios_is_port_present(dev_priv, PORT_D);
+ if (I915_READ(CHV_DP_D) & DP_DETECTED || has_port)
intel_dp_init(dev, CHV_DP_D, PORT_D);
+ if (I915_READ(CHV_HDMID) & SDVO_DETECTED || has_port)
+ intel_hdmi_init(dev, CHV_HDMID, PORT_D);
}
intel_dsi_init(dev);
projects / cascardo / linux.git / blobdiff