#define SKL_DDB_SIZE 896 /* in blocks */
#define BXT_DDB_SIZE 512
+#define SKL_SAGV_BLOCK_TIME 30 /* µs */
/*
* Return the index of a plane in the SKL DDB and wm result arrays. Primary
}
}
+/*
+ * SAGV dynamically adjusts the system agent voltage and clock frequencies
+ * depending on power and performance requirements. The display engine access
+ * to system memory is blocked during the adjustment time. Because of the
+ * blocking time, having this enabled can cause full system hangs and/or pipe
+ * underruns if we don't meet all of the following requirements:
+ *
+ * - <= 1 pipe enabled
+ * - All planes can enable watermarks for latencies >= SAGV engine block time
+ * - We're not using an interlaced display configuration
+ */
+int
+skl_enable_sagv(struct drm_i915_private *dev_priv)
+{
+ int ret;
+
+ if (dev_priv->skl_sagv_status == I915_SKL_SAGV_NOT_CONTROLLED ||
+ dev_priv->skl_sagv_status == I915_SKL_SAGV_ENABLED)
+ return 0;
+
+ DRM_DEBUG_KMS("Enabling the SAGV\n");
+ mutex_lock(&dev_priv->rps.hw_lock);
+
+ ret = sandybridge_pcode_write(dev_priv, GEN9_PCODE_SAGV_CONTROL,
+ GEN9_SAGV_ENABLE);
+
+ /* We don't need to wait for the SAGV when enabling */
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ /*
+ * Some skl systems, pre-release machines in particular,
+ * don't actually have an SAGV.
+ */
+ if (ret == -ENXIO) {
+ DRM_DEBUG_DRIVER("No SAGV found on system, ignoring\n");
+ dev_priv->skl_sagv_status = I915_SKL_SAGV_NOT_CONTROLLED;
+ return 0;
+ } else if (ret < 0) {
+ DRM_ERROR("Failed to enable the SAGV\n");
+ return ret;
+ }
+
+ dev_priv->skl_sagv_status = I915_SKL_SAGV_ENABLED;
+ return 0;
+}
+
+static int
+skl_do_sagv_disable(struct drm_i915_private *dev_priv)
+{
+ int ret;
+ uint32_t temp = GEN9_SAGV_DISABLE;
+
+ ret = sandybridge_pcode_read(dev_priv, GEN9_PCODE_SAGV_CONTROL,
+ &temp);
+ if (ret)
+ return ret;
+ else
+ return temp & GEN9_SAGV_IS_DISABLED;
+}
+
+int
+skl_disable_sagv(struct drm_i915_private *dev_priv)
+{
+ int ret, result;
+
+ if (dev_priv->skl_sagv_status == I915_SKL_SAGV_NOT_CONTROLLED ||
+ dev_priv->skl_sagv_status == I915_SKL_SAGV_DISABLED)
+ return 0;
+
+ DRM_DEBUG_KMS("Disabling the SAGV\n");
+ mutex_lock(&dev_priv->rps.hw_lock);
+
+ /* bspec says to keep retrying for at least 1 ms */
+ ret = wait_for(result = skl_do_sagv_disable(dev_priv), 1);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ if (ret == -ETIMEDOUT) {
+ DRM_ERROR("Request to disable SAGV timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ /*
+ * Some skl systems, pre-release machines in particular,
+ * don't actually have an SAGV.
+ */
+ if (result == -ENXIO) {
+ DRM_DEBUG_DRIVER("No SAGV found on system, ignoring\n");
+ dev_priv->skl_sagv_status = I915_SKL_SAGV_NOT_CONTROLLED;
+ return 0;
+ } else if (result < 0) {
+ DRM_ERROR("Failed to disable the SAGV\n");
+ return result;
+ }
+
+ dev_priv->skl_sagv_status = I915_SKL_SAGV_DISABLED;
+ return 0;
+}
+
+bool skl_can_enable_sagv(struct drm_atomic_state *state)
+{
+ struct drm_device *dev = state->dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
+ struct drm_crtc *crtc;
+ enum pipe pipe;
+ int level, plane;
+
+ /*
+ * SKL workaround: bspec recommends we disable the SAGV when we have
+ * more then one pipe enabled
+ *
+ * If there are no active CRTCs, no additional checks need be performed
+ */
+ if (hweight32(intel_state->active_crtcs) == 0)
+ return true;
+ else if (hweight32(intel_state->active_crtcs) > 1)
+ return false;
+
+ /* Since we're now guaranteed to only have one active CRTC... */
+ pipe = ffs(intel_state->active_crtcs) - 1;
+ crtc = dev_priv->pipe_to_crtc_mapping[pipe];
+
+ if (crtc->state->mode.flags & DRM_MODE_FLAG_INTERLACE)
+ return false;
+
+ for_each_plane(dev_priv, pipe, plane) {
+ /* Skip this plane if it's not enabled */
+ if (intel_state->wm_results.plane[pipe][plane][0] == 0)
+ continue;
+
+ /* Find the highest enabled wm level for this plane */
+ for (level = ilk_wm_max_level(dev);
+ intel_state->wm_results.plane[pipe][plane][level] == 0; --level)
+ { }
+
+ /*
+ * If any of the planes on this pipe don't enable wm levels
+ * that incur memory latencies higher then 30µs we can't enable
+ * the SAGV
+ */
+ if (dev_priv->wm.skl_latency[level] < SKL_SAGV_BLOCK_TIME)
+ return false;
+ }
+
+ return true;
+}
+
static void
skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
const struct intel_crtc_state *cstate,
total_data_rate += intel_cstate->wm.skl.plane_y_data_rate[id];
}
- WARN_ON(cstate->plane_mask && total_data_rate == 0);
-
return total_data_rate;
}
* pretend that all pipes switched active status so that we'll
* ensure a full DDB recompute.
*/
- if (dev_priv->wm.distrust_bios_wm)
+ if (dev_priv->wm.distrust_bios_wm) {
+ ret = drm_modeset_lock(&dev->mode_config.connection_mutex,
+ state->acquire_ctx);
+ if (ret)
+ return ret;
+
intel_state->active_pipe_changes = ~0;
+ /*
+ * We usually only initialize intel_state->active_crtcs if we
+ * we're doing a modeset; make sure this field is always
+ * initialized during the sanitization process that happens
+ * on the first commit too.
+ */
+ if (!intel_state->modeset)
+ intel_state->active_crtcs = dev_priv->active_crtcs;
+ }
+
/*
* If the modeset changes which CRTC's are active, we need to
* recompute the DDB allocation for *all* active pipes, even
ret = skl_allocate_pipe_ddb(cstate, ddb);
if (ret)
return ret;
+
+ ret = drm_atomic_add_affected_planes(state, &intel_crtc->base);
+ if (ret)
+ return ret;
}
return 0;
}
+static void
+skl_copy_wm_for_pipe(struct skl_wm_values *dst,
+ struct skl_wm_values *src,
+ enum pipe pipe)
+{
+ dst->wm_linetime[pipe] = src->wm_linetime[pipe];
+ memcpy(dst->plane[pipe], src->plane[pipe],
+ sizeof(dst->plane[pipe]));
+ memcpy(dst->plane_trans[pipe], src->plane_trans[pipe],
+ sizeof(dst->plane_trans[pipe]));
+
+ dst->ddb.pipe[pipe] = src->ddb.pipe[pipe];
+ memcpy(dst->ddb.y_plane[pipe], src->ddb.y_plane[pipe],
+ sizeof(dst->ddb.y_plane[pipe]));
+ memcpy(dst->ddb.plane[pipe], src->ddb.plane[pipe],
+ sizeof(dst->ddb.plane[pipe]));
+}
+
static int
skl_compute_wm(struct drm_atomic_state *state)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct skl_wm_values *results = &dev_priv->wm.skl_results;
+ struct skl_wm_values *hw_vals = &dev_priv->wm.skl_hw;
struct intel_crtc_state *cstate = to_intel_crtc_state(crtc->state);
struct skl_pipe_wm *pipe_wm = &cstate->wm.skl.optimal;
+ int pipe;
if ((results->dirty_pipes & drm_crtc_mask(crtc)) == 0)
return;
skl_write_wm_values(dev_priv, results);
skl_flush_wm_values(dev_priv, results);
- /* store the new configuration */
- dev_priv->wm.skl_hw = *results;
+ /*
+ * Store the new configuration (but only for the pipes that have
+ * changed; the other values weren't recomputed).
+ */
+ for_each_pipe_masked(dev_priv, pipe, results->dirty_pipes)
+ skl_copy_wm_for_pipe(hw_vals, results, pipe);
mutex_unlock(&dev_priv->wm.wm_mutex);
}
}
}
+static inline int gen6_check_mailbox_status(struct drm_i915_private *dev_priv)
+{
+ uint32_t flags =
+ I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_ERROR_MASK;
+
+ switch (flags) {
+ case GEN6_PCODE_SUCCESS:
+ return 0;
+ case GEN6_PCODE_UNIMPLEMENTED_CMD:
+ case GEN6_PCODE_ILLEGAL_CMD:
+ return -ENXIO;
+ case GEN6_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
+ case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
+ return -EOVERFLOW;
+ case GEN6_PCODE_TIMEOUT:
+ return -ETIMEDOUT;
+ default:
+ MISSING_CASE(flags)
+ return 0;
+ }
+}
+
+static inline int gen7_check_mailbox_status(struct drm_i915_private *dev_priv)
+{
+ uint32_t flags =
+ I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_ERROR_MASK;
+
+ switch (flags) {
+ case GEN6_PCODE_SUCCESS:
+ return 0;
+ case GEN6_PCODE_ILLEGAL_CMD:
+ return -ENXIO;
+ case GEN7_PCODE_TIMEOUT:
+ return -ETIMEDOUT;
+ case GEN7_PCODE_ILLEGAL_DATA:
+ return -EINVAL;
+ case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
+ return -EOVERFLOW;
+ default:
+ MISSING_CASE(flags);
+ return 0;
+ }
+}
+
int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val)
{
+ int status;
+
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
/* GEN6_PCODE_* are outside of the forcewake domain, we can
*val = I915_READ_FW(GEN6_PCODE_DATA);
I915_WRITE_FW(GEN6_PCODE_DATA, 0);
+ if (INTEL_GEN(dev_priv) > 6)
+ status = gen7_check_mailbox_status(dev_priv);
+ else
+ status = gen6_check_mailbox_status(dev_priv);
+
+ if (status) {
+ DRM_DEBUG_DRIVER("warning: pcode (read) mailbox access failed: %d\n",
+ status);
+ return status;
+ }
+
return 0;
}
int sandybridge_pcode_write(struct drm_i915_private *dev_priv,
- u32 mbox, u32 val)
+ u32 mbox, u32 val)
{
+ int status;
+
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
/* GEN6_PCODE_* are outside of the forcewake domain, we can
I915_WRITE_FW(GEN6_PCODE_DATA, 0);
+ if (INTEL_GEN(dev_priv) > 6)
+ status = gen7_check_mailbox_status(dev_priv);
+ else
+ status = gen6_check_mailbox_status(dev_priv);
+
+ if (status) {
+ DRM_DEBUG_DRIVER("warning: pcode (write) mailbox access failed: %d\n",
+ status);
+ return status;
+ }
+
return 0;
}
projects / cascardo / linux.git / blobdiff