#define EMC6D102_REG_EXTEND_ADC3 0x87
#define EMC6D102_REG_EXTEND_ADC4 0x88
-
/*
* Conversions. Rounding and limit checking is only done on the TO_REG
* variants. Note that you should be a bit careful with which arguments
/* Temperature is reported in .001 degC increments */
#define TEMP_TO_REG(val) \
- clamp_val(SCALE(val, 1000, 1), -127, 127)
+ DIV_ROUND_CLOSEST(clamp_val((val), -127000, 127000), 1000)
#define TEMPEXT_FROM_REG(val, ext) \
SCALE(((val) << 4) + (ext), 16, 1000)
#define TEMP_FROM_REG(val) ((val) * 1000)
13300, 16000, 20000, 26600, 32000, 40000, 53300, 80000
};
-static int RANGE_TO_REG(int range)
+static int RANGE_TO_REG(long range)
{
int i;
11, 15, 22, 29, 35, 44, 59, 88
};
-static int FREQ_TO_REG(const int *map, int freq)
+static int FREQ_TO_REG(const int *map, unsigned long freq)
{
int i;
* The structure is dynamically allocated.
*/
struct lm85_data {
- struct device *hwmon_dev;
+ struct i2c_client *client;
+ const struct attribute_group *groups[6];
const int *freq_map;
enum chips type;
struct lm85_zone zone[3];
};
-static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info);
-static int lm85_probe(struct i2c_client *client,
- const struct i2c_device_id *id);
-static int lm85_remove(struct i2c_client *client);
+static int lm85_read_value(struct i2c_client *client, u8 reg)
+{
+ int res;
-static int lm85_read_value(struct i2c_client *client, u8 reg);
-static void lm85_write_value(struct i2c_client *client, u8 reg, int value);
-static struct lm85_data *lm85_update_device(struct device *dev);
+ /* What size location is it? */
+ switch (reg) {
+ case LM85_REG_FAN(0): /* Read WORD data */
+ case LM85_REG_FAN(1):
+ case LM85_REG_FAN(2):
+ case LM85_REG_FAN(3):
+ case LM85_REG_FAN_MIN(0):
+ case LM85_REG_FAN_MIN(1):
+ case LM85_REG_FAN_MIN(2):
+ case LM85_REG_FAN_MIN(3):
+ case LM85_REG_ALARM1: /* Read both bytes at once */
+ res = i2c_smbus_read_byte_data(client, reg) & 0xff;
+ res |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
+ break;
+ default: /* Read BYTE data */
+ res = i2c_smbus_read_byte_data(client, reg);
+ break;
+ }
+ return res;
+}
-static const struct i2c_device_id lm85_id[] = {
- { "adm1027", adm1027 },
- { "adt7463", adt7463 },
- { "adt7468", adt7468 },
- { "lm85", lm85 },
- { "lm85b", lm85 },
- { "lm85c", lm85 },
- { "emc6d100", emc6d100 },
- { "emc6d101", emc6d100 },
- { "emc6d102", emc6d102 },
- { "emc6d103", emc6d103 },
- { "emc6d103s", emc6d103s },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, lm85_id);
+static void lm85_write_value(struct i2c_client *client, u8 reg, int value)
+{
+ switch (reg) {
+ case LM85_REG_FAN(0): /* Write WORD data */
+ case LM85_REG_FAN(1):
+ case LM85_REG_FAN(2):
+ case LM85_REG_FAN(3):
+ case LM85_REG_FAN_MIN(0):
+ case LM85_REG_FAN_MIN(1):
+ case LM85_REG_FAN_MIN(2):
+ case LM85_REG_FAN_MIN(3):
+ /* NOTE: ALARM is read only, so not included here */
+ i2c_smbus_write_byte_data(client, reg, value & 0xff);
+ i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
+ break;
+ default: /* Write BYTE data */
+ i2c_smbus_write_byte_data(client, reg, value);
+ break;
+ }
+}
-static struct i2c_driver lm85_driver = {
- .class = I2C_CLASS_HWMON,
- .driver = {
- .name = "lm85",
- },
- .probe = lm85_probe,
- .remove = lm85_remove,
- .id_table = lm85_id,
- .detect = lm85_detect,
- .address_list = normal_i2c,
-};
+static struct lm85_data *lm85_update_device(struct device *dev)
+{
+ struct lm85_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ if (!data->valid ||
+ time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL)) {
+ /* Things that change quickly */
+ dev_dbg(&client->dev, "Reading sensor values\n");
+
+ /*
+ * Have to read extended bits first to "freeze" the
+ * more significant bits that are read later.
+ * There are 2 additional resolution bits per channel and we
+ * have room for 4, so we shift them to the left.
+ */
+ if (data->type == adm1027 || data->type == adt7463 ||
+ data->type == adt7468) {
+ int ext1 = lm85_read_value(client,
+ ADM1027_REG_EXTEND_ADC1);
+ int ext2 = lm85_read_value(client,
+ ADM1027_REG_EXTEND_ADC2);
+ int val = (ext1 << 8) + ext2;
+
+ for (i = 0; i <= 4; i++)
+ data->in_ext[i] =
+ ((val >> (i * 2)) & 0x03) << 2;
+
+ for (i = 0; i <= 2; i++)
+ data->temp_ext[i] =
+ (val >> ((i + 4) * 2)) & 0x0c;
+ }
+
+ data->vid = lm85_read_value(client, LM85_REG_VID);
+
+ for (i = 0; i <= 3; ++i) {
+ data->in[i] =
+ lm85_read_value(client, LM85_REG_IN(i));
+ data->fan[i] =
+ lm85_read_value(client, LM85_REG_FAN(i));
+ }
+
+ if (!data->has_vid5)
+ data->in[4] = lm85_read_value(client, LM85_REG_IN(4));
+
+ if (data->type == adt7468)
+ data->cfg5 = lm85_read_value(client, ADT7468_REG_CFG5);
+
+ for (i = 0; i <= 2; ++i) {
+ data->temp[i] =
+ lm85_read_value(client, LM85_REG_TEMP(i));
+ data->pwm[i] =
+ lm85_read_value(client, LM85_REG_PWM(i));
+
+ if (IS_ADT7468_OFF64(data))
+ data->temp[i] -= 64;
+ }
+
+ data->alarms = lm85_read_value(client, LM85_REG_ALARM1);
+
+ if (data->type == emc6d100) {
+ /* Three more voltage sensors */
+ for (i = 5; i <= 7; ++i) {
+ data->in[i] = lm85_read_value(client,
+ EMC6D100_REG_IN(i));
+ }
+ /* More alarm bits */
+ data->alarms |= lm85_read_value(client,
+ EMC6D100_REG_ALARM3) << 16;
+ } else if (data->type == emc6d102 || data->type == emc6d103 ||
+ data->type == emc6d103s) {
+ /*
+ * Have to read LSB bits after the MSB ones because
+ * the reading of the MSB bits has frozen the
+ * LSBs (backward from the ADM1027).
+ */
+ int ext1 = lm85_read_value(client,
+ EMC6D102_REG_EXTEND_ADC1);
+ int ext2 = lm85_read_value(client,
+ EMC6D102_REG_EXTEND_ADC2);
+ int ext3 = lm85_read_value(client,
+ EMC6D102_REG_EXTEND_ADC3);
+ int ext4 = lm85_read_value(client,
+ EMC6D102_REG_EXTEND_ADC4);
+ data->in_ext[0] = ext3 & 0x0f;
+ data->in_ext[1] = ext4 & 0x0f;
+ data->in_ext[2] = ext4 >> 4;
+ data->in_ext[3] = ext3 >> 4;
+ data->in_ext[4] = ext2 >> 4;
+
+ data->temp_ext[0] = ext1 & 0x0f;
+ data->temp_ext[1] = ext2 & 0x0f;
+ data->temp_ext[2] = ext1 >> 4;
+ }
+
+ data->last_reading = jiffies;
+ } /* last_reading */
+
+ if (!data->valid ||
+ time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL)) {
+ /* Things that don't change often */
+ dev_dbg(&client->dev, "Reading config values\n");
+
+ for (i = 0; i <= 3; ++i) {
+ data->in_min[i] =
+ lm85_read_value(client, LM85_REG_IN_MIN(i));
+ data->in_max[i] =
+ lm85_read_value(client, LM85_REG_IN_MAX(i));
+ data->fan_min[i] =
+ lm85_read_value(client, LM85_REG_FAN_MIN(i));
+ }
+
+ if (!data->has_vid5) {
+ data->in_min[4] = lm85_read_value(client,
+ LM85_REG_IN_MIN(4));
+ data->in_max[4] = lm85_read_value(client,
+ LM85_REG_IN_MAX(4));
+ }
+
+ if (data->type == emc6d100) {
+ for (i = 5; i <= 7; ++i) {
+ data->in_min[i] = lm85_read_value(client,
+ EMC6D100_REG_IN_MIN(i));
+ data->in_max[i] = lm85_read_value(client,
+ EMC6D100_REG_IN_MAX(i));
+ }
+ }
+
+ for (i = 0; i <= 2; ++i) {
+ int val;
+
+ data->temp_min[i] =
+ lm85_read_value(client, LM85_REG_TEMP_MIN(i));
+ data->temp_max[i] =
+ lm85_read_value(client, LM85_REG_TEMP_MAX(i));
+
+ data->autofan[i].config =
+ lm85_read_value(client, LM85_REG_AFAN_CONFIG(i));
+ val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i));
+ data->pwm_freq[i] = val & 0x07;
+ data->zone[i].range = val >> 4;
+ data->autofan[i].min_pwm =
+ lm85_read_value(client, LM85_REG_AFAN_MINPWM(i));
+ data->zone[i].limit =
+ lm85_read_value(client, LM85_REG_AFAN_LIMIT(i));
+ data->zone[i].critical =
+ lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i));
+
+ if (IS_ADT7468_OFF64(data)) {
+ data->temp_min[i] -= 64;
+ data->temp_max[i] -= 64;
+ data->zone[i].limit -= 64;
+ data->zone[i].critical -= 64;
+ }
+ }
+
+ if (data->type != emc6d103s) {
+ i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
+ data->autofan[0].min_off = (i & 0x20) != 0;
+ data->autofan[1].min_off = (i & 0x40) != 0;
+ data->autofan[2].min_off = (i & 0x80) != 0;
+
+ i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
+ data->zone[0].hyst = i >> 4;
+ data->zone[1].hyst = i & 0x0f;
+
+ i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
+ data->zone[2].hyst = i >> 4;
+ }
+
+ data->last_config = jiffies;
+ } /* last_config */
+
+ data->valid = 1;
+
+ mutex_unlock(&data->update_lock);
+ return data;
+}
/* 4 Fans */
static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct lm85_data *data = i2c_get_clientdata(client);
+ struct lm85_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
unsigned long val;
int err;
if (err)
return err;
+ if (val > 255)
+ return -EINVAL;
+
data->vrm = val;
return count;
}
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct lm85_data *data = i2c_get_clientdata(client);
+ struct lm85_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
unsigned long val;
int err;
*attr, const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct lm85_data *data = i2c_get_clientdata(client);
+ struct lm85_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
u8 config;
unsigned long val;
int err;
struct device_attribute *attr, const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct lm85_data *data = i2c_get_clientdata(client);
+ struct lm85_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
unsigned long val;
int err;
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct lm85_data *data = i2c_get_clientdata(client);
+ struct lm85_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
long val;
int err;
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct lm85_data *data = i2c_get_clientdata(client);
+ struct lm85_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
long val;
int err;
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct lm85_data *data = i2c_get_clientdata(client);
+ struct lm85_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
long val;
int err;
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct lm85_data *data = i2c_get_clientdata(client);
+ struct lm85_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
long val;
int err;
struct device_attribute *attr, const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct lm85_data *data = i2c_get_clientdata(client);
+ struct lm85_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
long val;
int err;
struct device_attribute *attr, const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct lm85_data *data = i2c_get_clientdata(client);
+ struct lm85_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
unsigned long val;
int err;
struct device_attribute *attr, const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct lm85_data *data = i2c_get_clientdata(client);
+ struct lm85_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
u8 tmp;
long val;
int err;
struct device_attribute *attr, const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct lm85_data *data = i2c_get_clientdata(client);
+ struct lm85_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
int min;
long val;
int err;
struct device_attribute *attr, const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct lm85_data *data = i2c_get_clientdata(client);
+ struct lm85_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
long val;
int err;
struct device_attribute *attr, const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct lm85_data *data = i2c_get_clientdata(client);
+ struct lm85_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
int min;
long val;
int err;
struct device_attribute *attr, const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct lm85_data *data = i2c_get_clientdata(client);
+ struct lm85_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
long val;
int err;
return 0;
}
-static void lm85_remove_files(struct i2c_client *client, struct lm85_data *data)
-{
- sysfs_remove_group(&client->dev.kobj, &lm85_group);
- if (data->type != emc6d103s) {
- sysfs_remove_group(&client->dev.kobj, &lm85_group_minctl);
- sysfs_remove_group(&client->dev.kobj, &lm85_group_temp_off);
- }
- if (!data->has_vid5)
- sysfs_remove_group(&client->dev.kobj, &lm85_group_in4);
- if (data->type == emc6d100)
- sysfs_remove_group(&client->dev.kobj, &lm85_group_in567);
-}
-
-static int lm85_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int lm85_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
+ struct device *dev = &client->dev;
+ struct device *hwmon_dev;
struct lm85_data *data;
- int err;
+ int idx = 0;
- data = devm_kzalloc(&client->dev, sizeof(struct lm85_data), GFP_KERNEL);
+ data = devm_kzalloc(dev, sizeof(struct lm85_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- i2c_set_clientdata(client, data);
+ data->client = client;
data->type = id->driver_data;
mutex_init(&data->update_lock);
/* Initialize the LM85 chip */
lm85_init_client(client);
- /* Register sysfs hooks */
- err = sysfs_create_group(&client->dev.kobj, &lm85_group);
- if (err)
- return err;
+ /* sysfs hooks */
+ data->groups[idx++] = &lm85_group;
/* minctl and temp_off exist on all chips except emc6d103s */
if (data->type != emc6d103s) {
- err = sysfs_create_group(&client->dev.kobj, &lm85_group_minctl);
- if (err)
- goto err_remove_files;
- err = sysfs_create_group(&client->dev.kobj,
- &lm85_group_temp_off);
- if (err)
- goto err_remove_files;
+ data->groups[idx++] = &lm85_group_minctl;
+ data->groups[idx++] = &lm85_group_temp_off;
}
/*
data->has_vid5 = true;
}
- if (!data->has_vid5) {
- err = sysfs_create_group(&client->dev.kobj, &lm85_group_in4);
- if (err)
- goto err_remove_files;
- }
+ if (!data->has_vid5)
+ data->groups[idx++] = &lm85_group_in4;
/* The EMC6D100 has 3 additional voltage inputs */
- if (data->type == emc6d100) {
- err = sysfs_create_group(&client->dev.kobj, &lm85_group_in567);
- if (err)
- goto err_remove_files;
- }
-
- data->hwmon_dev = hwmon_device_register(&client->dev);
- if (IS_ERR(data->hwmon_dev)) {
- err = PTR_ERR(data->hwmon_dev);
- goto err_remove_files;
- }
-
- return 0;
-
- /* Error out and cleanup code */
- err_remove_files:
- lm85_remove_files(client, data);
- return err;
-}
-
-static int lm85_remove(struct i2c_client *client)
-{
- struct lm85_data *data = i2c_get_clientdata(client);
- hwmon_device_unregister(data->hwmon_dev);
- lm85_remove_files(client, data);
- return 0;
-}
-
-
-static int lm85_read_value(struct i2c_client *client, u8 reg)
-{
- int res;
-
- /* What size location is it? */
- switch (reg) {
- case LM85_REG_FAN(0): /* Read WORD data */
- case LM85_REG_FAN(1):
- case LM85_REG_FAN(2):
- case LM85_REG_FAN(3):
- case LM85_REG_FAN_MIN(0):
- case LM85_REG_FAN_MIN(1):
- case LM85_REG_FAN_MIN(2):
- case LM85_REG_FAN_MIN(3):
- case LM85_REG_ALARM1: /* Read both bytes at once */
- res = i2c_smbus_read_byte_data(client, reg) & 0xff;
- res |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
- break;
- default: /* Read BYTE data */
- res = i2c_smbus_read_byte_data(client, reg);
- break;
- }
+ if (data->type == emc6d100)
+ data->groups[idx++] = &lm85_group_in567;
- return res;
+ hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+ data, data->groups);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
}
-static void lm85_write_value(struct i2c_client *client, u8 reg, int value)
-{
- switch (reg) {
- case LM85_REG_FAN(0): /* Write WORD data */
- case LM85_REG_FAN(1):
- case LM85_REG_FAN(2):
- case LM85_REG_FAN(3):
- case LM85_REG_FAN_MIN(0):
- case LM85_REG_FAN_MIN(1):
- case LM85_REG_FAN_MIN(2):
- case LM85_REG_FAN_MIN(3):
- /* NOTE: ALARM is read only, so not included here */
- i2c_smbus_write_byte_data(client, reg, value & 0xff);
- i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
- break;
- default: /* Write BYTE data */
- i2c_smbus_write_byte_data(client, reg, value);
- break;
- }
-}
-
-static struct lm85_data *lm85_update_device(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct lm85_data *data = i2c_get_clientdata(client);
- int i;
-
- mutex_lock(&data->update_lock);
-
- if (!data->valid ||
- time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL)) {
- /* Things that change quickly */
- dev_dbg(&client->dev, "Reading sensor values\n");
-
- /*
- * Have to read extended bits first to "freeze" the
- * more significant bits that are read later.
- * There are 2 additional resolution bits per channel and we
- * have room for 4, so we shift them to the left.
- */
- if (data->type == adm1027 || data->type == adt7463 ||
- data->type == adt7468) {
- int ext1 = lm85_read_value(client,
- ADM1027_REG_EXTEND_ADC1);
- int ext2 = lm85_read_value(client,
- ADM1027_REG_EXTEND_ADC2);
- int val = (ext1 << 8) + ext2;
-
- for (i = 0; i <= 4; i++)
- data->in_ext[i] =
- ((val >> (i * 2)) & 0x03) << 2;
-
- for (i = 0; i <= 2; i++)
- data->temp_ext[i] =
- (val >> ((i + 4) * 2)) & 0x0c;
- }
-
- data->vid = lm85_read_value(client, LM85_REG_VID);
-
- for (i = 0; i <= 3; ++i) {
- data->in[i] =
- lm85_read_value(client, LM85_REG_IN(i));
- data->fan[i] =
- lm85_read_value(client, LM85_REG_FAN(i));
- }
-
- if (!data->has_vid5)
- data->in[4] = lm85_read_value(client, LM85_REG_IN(4));
-
- if (data->type == adt7468)
- data->cfg5 = lm85_read_value(client, ADT7468_REG_CFG5);
-
- for (i = 0; i <= 2; ++i) {
- data->temp[i] =
- lm85_read_value(client, LM85_REG_TEMP(i));
- data->pwm[i] =
- lm85_read_value(client, LM85_REG_PWM(i));
-
- if (IS_ADT7468_OFF64(data))
- data->temp[i] -= 64;
- }
-
- data->alarms = lm85_read_value(client, LM85_REG_ALARM1);
-
- if (data->type == emc6d100) {
- /* Three more voltage sensors */
- for (i = 5; i <= 7; ++i) {
- data->in[i] = lm85_read_value(client,
- EMC6D100_REG_IN(i));
- }
- /* More alarm bits */
- data->alarms |= lm85_read_value(client,
- EMC6D100_REG_ALARM3) << 16;
- } else if (data->type == emc6d102 || data->type == emc6d103 ||
- data->type == emc6d103s) {
- /*
- * Have to read LSB bits after the MSB ones because
- * the reading of the MSB bits has frozen the
- * LSBs (backward from the ADM1027).
- */
- int ext1 = lm85_read_value(client,
- EMC6D102_REG_EXTEND_ADC1);
- int ext2 = lm85_read_value(client,
- EMC6D102_REG_EXTEND_ADC2);
- int ext3 = lm85_read_value(client,
- EMC6D102_REG_EXTEND_ADC3);
- int ext4 = lm85_read_value(client,
- EMC6D102_REG_EXTEND_ADC4);
- data->in_ext[0] = ext3 & 0x0f;
- data->in_ext[1] = ext4 & 0x0f;
- data->in_ext[2] = ext4 >> 4;
- data->in_ext[3] = ext3 >> 4;
- data->in_ext[4] = ext2 >> 4;
-
- data->temp_ext[0] = ext1 & 0x0f;
- data->temp_ext[1] = ext2 & 0x0f;
- data->temp_ext[2] = ext1 >> 4;
- }
-
- data->last_reading = jiffies;
- } /* last_reading */
-
- if (!data->valid ||
- time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL)) {
- /* Things that don't change often */
- dev_dbg(&client->dev, "Reading config values\n");
-
- for (i = 0; i <= 3; ++i) {
- data->in_min[i] =
- lm85_read_value(client, LM85_REG_IN_MIN(i));
- data->in_max[i] =
- lm85_read_value(client, LM85_REG_IN_MAX(i));
- data->fan_min[i] =
- lm85_read_value(client, LM85_REG_FAN_MIN(i));
- }
-
- if (!data->has_vid5) {
- data->in_min[4] = lm85_read_value(client,
- LM85_REG_IN_MIN(4));
- data->in_max[4] = lm85_read_value(client,
- LM85_REG_IN_MAX(4));
- }
-
- if (data->type == emc6d100) {
- for (i = 5; i <= 7; ++i) {
- data->in_min[i] = lm85_read_value(client,
- EMC6D100_REG_IN_MIN(i));
- data->in_max[i] = lm85_read_value(client,
- EMC6D100_REG_IN_MAX(i));
- }
- }
-
- for (i = 0; i <= 2; ++i) {
- int val;
-
- data->temp_min[i] =
- lm85_read_value(client, LM85_REG_TEMP_MIN(i));
- data->temp_max[i] =
- lm85_read_value(client, LM85_REG_TEMP_MAX(i));
-
- data->autofan[i].config =
- lm85_read_value(client, LM85_REG_AFAN_CONFIG(i));
- val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i));
- data->pwm_freq[i] = val & 0x07;
- data->zone[i].range = val >> 4;
- data->autofan[i].min_pwm =
- lm85_read_value(client, LM85_REG_AFAN_MINPWM(i));
- data->zone[i].limit =
- lm85_read_value(client, LM85_REG_AFAN_LIMIT(i));
- data->zone[i].critical =
- lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i));
-
- if (IS_ADT7468_OFF64(data)) {
- data->temp_min[i] -= 64;
- data->temp_max[i] -= 64;
- data->zone[i].limit -= 64;
- data->zone[i].critical -= 64;
- }
- }
-
- if (data->type != emc6d103s) {
- i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
- data->autofan[0].min_off = (i & 0x20) != 0;
- data->autofan[1].min_off = (i & 0x40) != 0;
- data->autofan[2].min_off = (i & 0x80) != 0;
-
- i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
- data->zone[0].hyst = i >> 4;
- data->zone[1].hyst = i & 0x0f;
-
- i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
- data->zone[2].hyst = i >> 4;
- }
-
- data->last_config = jiffies;
- } /* last_config */
-
- data->valid = 1;
-
- mutex_unlock(&data->update_lock);
+static const struct i2c_device_id lm85_id[] = {
+ { "adm1027", adm1027 },
+ { "adt7463", adt7463 },
+ { "adt7468", adt7468 },
+ { "lm85", lm85 },
+ { "lm85b", lm85 },
+ { "lm85c", lm85 },
+ { "emc6d100", emc6d100 },
+ { "emc6d101", emc6d100 },
+ { "emc6d102", emc6d102 },
+ { "emc6d103", emc6d103 },
+ { "emc6d103s", emc6d103s },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm85_id);
- return data;
-}
+static struct i2c_driver lm85_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "lm85",
+ },
+ .probe = lm85_probe,
+ .id_table = lm85_id,
+ .detect = lm85_detect,
+ .address_list = normal_i2c,
+};
module_i2c_driver(lm85_driver);
projects / cascardo / linux.git / blobdiff