ide: move ide_rate_filter() calls to the upper layer (take 2)
[cascardo/linux.git] / drivers / ide / pci / atiixp.c
index 2761510..e05e882 100644 (file)
@@ -1,9 +1,8 @@
 /*
- *  linux/drivers/ide/pci/atiixp.c     Version 0.01-bart2      Feb. 26, 2004
+ *  linux/drivers/ide/pci/atiixp.c     Version 0.02    Jun 16 2007
  *
  *  Copyright (C) 2003 ATI Inc. <hyu@ati.com>
- *  Copyright (C) 2004 Bartlomiej Zolnierkiewicz
- *
+ *  Copyright (C) 2004,2007 Bartlomiej Zolnierkiewicz
  */
 
 #include <linux/types.h>
@@ -123,14 +122,14 @@ static void atiixp_dma_host_off(ide_drive_t *drive)
 }
 
 /**
- *     atiixp_tune_drive               -       tune a drive attached to a ATIIXP
+ *     atiixp_tune_pio -       tune a drive attached to a ATIIXP
  *     @drive: drive to tune
  *     @pio: desired PIO mode
  *
  *     Set the interface PIO mode.
  */
 
-static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
+static void atiixp_tune_pio(ide_drive_t *drive, u8 pio)
 {
        struct pci_dev *dev = drive->hwif->pci_dev;
        unsigned long flags;
@@ -154,26 +153,36 @@ static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
        spin_unlock_irqrestore(&atiixp_lock, flags);
 }
 
+static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
+{
+       pio = ide_get_best_pio_mode(drive, pio, 4);
+       atiixp_tune_pio(drive, pio);
+       (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
+}
+
 /**
  *     atiixp_tune_chipset     -       tune a ATIIXP interface
  *     @drive: IDE drive to tune
- *     @xferspeed: speed to configure
+ *     @speed: speed to configure
  *
  *     Set a ATIIXP interface channel to the desired speeds. This involves
  *     requires the right timing data into the ATIIXP configuration space
  *     then setting the drive parameters appropriately
  */
 
-static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed)
+static int atiixp_speedproc(ide_drive_t *drive, const u8 speed)
 {
        struct pci_dev *dev = drive->hwif->pci_dev;
        unsigned long flags;
        int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
        u32 tmp32;
        u16 tmp16;
-       u8 speed, pio;
+       u8 pio;
 
-       speed = ide_rate_filter(drive, xferspeed);
+       if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
+               atiixp_tune_pio(drive, speed - XFER_PIO_0);
+               return ide_config_drive_speed(drive, speed);
+       }
 
        spin_lock_irqsave(&atiixp_lock, flags);
 
@@ -201,7 +210,7 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed)
        else
                pio = speed - XFER_PIO_0;
 
-       atiixp_tuneproc(drive, pio);
+       atiixp_tune_pio(drive, pio);
 
        return ide_config_drive_speed(drive, speed);
 }
@@ -216,18 +225,13 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed)
 
 static int atiixp_dma_check(ide_drive_t *drive)
 {
-       u8 tspeed, speed;
-
        drive->init_speed = 0;
 
        if (ide_tune_dma(drive))
                return 0;
 
-       if (ide_use_fast_pio(drive)) {
-               tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
-               speed = atiixp_dma_2_pio(XFER_PIO_0 + tspeed) + XFER_PIO_0;
-               atiixp_speedproc(drive, speed);
-       }
+       if (ide_use_fast_pio(drive))
+               atiixp_tuneproc(drive, 255);
 
        return -1;
 }
@@ -285,17 +289,18 @@ static ide_pci_device_t atiixp_pci_info[] __devinitdata = {
        {       /* 0 */
                .name           = "ATIIXP",
                .init_hwif      = init_hwif_atiixp,
-               .channels       = 2,
                .autodma        = AUTODMA,
                .enablebits     = {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
                .bootable       = ON_BOARD,
+               .pio_mask       = ATA_PIO4,
        },{     /* 1 */
                .name           = "SB600_PATA",
                .init_hwif      = init_hwif_atiixp,
-               .channels       = 1,
                .autodma        = AUTODMA,
                .enablebits     = {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
                .bootable       = ON_BOARD,
+               .host_flags     = IDE_HFLAG_SINGLE,
+               .pio_mask       = ATA_PIO4,
        },
 };
 
@@ -318,7 +323,7 @@ static struct pci_device_id atiixp_pci_tbl[] = {
        { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
        { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
        { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
-       { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+       { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
        { 0, },
 };
 MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);