#define STMPE_KEYPAD_MAX_ROWS 8
#define STMPE_KEYPAD_MAX_COLS 8
#define STMPE_KEYPAD_ROW_SHIFT 3
-#define STMPE_KEYPAD_KEYMAP_SIZE \
+#define STMPE_KEYPAD_KEYMAP_MAX_SIZE \
(STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS)
/**
* struct stmpe_keypad_variant - model-specific attributes
* @auto_increment: whether the KPC_DATA_BYTE register address
* auto-increments on multiple read
+ * @set_pullup: whether the pins need to have their pull-ups set
* @num_data: number of data bytes
* @num_normal_data: number of normal keys' data bytes
* @max_cols: maximum number of columns supported
*/
struct stmpe_keypad_variant {
bool auto_increment;
+ bool set_pullup;
int num_data;
int num_normal_data;
int max_cols;
},
[STMPE2401] = {
.auto_increment = false,
+ .set_pullup = true,
.num_data = 3,
.num_normal_data = 2,
.max_cols = 8,
},
[STMPE2403] = {
.auto_increment = true,
+ .set_pullup = true,
.num_data = 5,
.num_normal_data = 3,
.max_cols = 8,
},
};
+/**
+ * struct stmpe_keypad - STMPE keypad state container
+ * @stmpe: pointer to parent STMPE device
+ * @input: spawned input device
+ * @variant: STMPE variant
+ * @debounce_ms: debounce interval, in ms. Maximum is
+ * %STMPE_KEYPAD_MAX_DEBOUNCE.
+ * @scan_count: number of key scanning cycles to confirm key data.
+ * Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
+ * @no_autorepeat: disable key autorepeat
+ * @rows: bitmask for the rows
+ * @cols: bitmask for the columns
+ * @keymap: the keymap
+ */
struct stmpe_keypad {
struct stmpe *stmpe;
struct input_dev *input;
const struct stmpe_keypad_variant *variant;
- const struct stmpe_keypad_platform_data *plat;
-
+ unsigned int debounce_ms;
+ unsigned int scan_count;
+ bool no_autorepeat;
unsigned int rows;
unsigned int cols;
-
- unsigned short keymap[STMPE_KEYPAD_KEYMAP_SIZE];
+ unsigned short keymap[STMPE_KEYPAD_KEYMAP_MAX_SIZE];
};
static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data)
unsigned int col_gpios = variant->col_gpios;
unsigned int row_gpios = variant->row_gpios;
struct stmpe *stmpe = keypad->stmpe;
+ u8 pureg = stmpe->regs[STMPE_IDX_GPPUR_LSB];
unsigned int pins = 0;
+ unsigned int pu_pins = 0;
+ int ret;
int i;
/*
for (i = 0; i < variant->max_cols; i++) {
int num = __ffs(col_gpios);
- if (keypad->cols & (1 << i))
+ if (keypad->cols & (1 << i)) {
pins |= 1 << num;
+ pu_pins |= 1 << num;
+ }
col_gpios &= ~(1 << num);
}
row_gpios &= ~(1 << num);
}
- return stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+ ret = stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+ if (ret)
+ return ret;
+
+ /*
+ * On STMPE24xx, set pin bias to pull-up on all keypad input
+ * pins (columns), this incidentally happen to be maximum 8 pins
+ * and placed at GPIO0-7 so only the LSB of the pull up register
+ * ever needs to be written.
+ */
+ if (variant->set_pullup) {
+ u8 val;
+
+ ret = stmpe_reg_read(stmpe, pureg);
+ if (ret)
+ return ret;
+
+ /* Do not touch unused pins, may be used for GPIO */
+ val = ret & ~pu_pins;
+ val |= pu_pins;
+
+ ret = stmpe_reg_write(stmpe, pureg, val);
+ }
+
+ return 0;
}
static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
{
- const struct stmpe_keypad_platform_data *plat = keypad->plat;
const struct stmpe_keypad_variant *variant = keypad->variant;
struct stmpe *stmpe = keypad->stmpe;
int ret;
- if (plat->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
+ if (keypad->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
return -EINVAL;
- if (plat->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
+ if (keypad->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
return -EINVAL;
ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD);
ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB,
STMPE_KPC_CTRL_MSB_SCAN_COUNT,
- plat->scan_count << 4);
+ keypad->scan_count << 4);
if (ret < 0)
return ret;
STMPE_KPC_CTRL_LSB_SCAN |
STMPE_KPC_CTRL_LSB_DEBOUNCE,
STMPE_KPC_CTRL_LSB_SCAN |
- (plat->debounce_ms << 1));
+ (keypad->debounce_ms << 1));
}
-static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad)
+static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad,
+ u32 used_rows, u32 used_cols)
{
int row, col;
- for (row = 0; row < STMPE_KEYPAD_MAX_ROWS; row++) {
- for (col = 0; col < STMPE_KEYPAD_MAX_COLS; col++) {
+ for (row = 0; row < used_rows; row++) {
+ for (col = 0; col < used_cols; col++) {
int code = MATRIX_SCAN_CODE(row, col,
- STMPE_KEYPAD_ROW_SHIFT);
+ STMPE_KEYPAD_ROW_SHIFT);
if (keypad->keymap[code] != KEY_RESERVED) {
keypad->rows |= 1 << row;
keypad->cols |= 1 << col;
}
}
-#ifdef CONFIG_OF
-static const struct stmpe_keypad_platform_data *
-stmpe_keypad_of_probe(struct device *dev)
-{
- struct device_node *np = dev->of_node;
- struct stmpe_keypad_platform_data *plat;
-
- if (!np)
- return ERR_PTR(-ENODEV);
-
- plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL);
- if (!plat)
- return ERR_PTR(-ENOMEM);
-
- of_property_read_u32(np, "debounce-interval", &plat->debounce_ms);
- of_property_read_u32(np, "st,scan-count", &plat->scan_count);
-
- plat->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
-
- return plat;
-}
-#else
-static inline const struct stmpe_keypad_platform_data *
-stmpe_keypad_of_probe(struct device *dev)
-{
- return ERR_PTR(-EINVAL);
-}
-#endif
-
static int stmpe_keypad_probe(struct platform_device *pdev)
{
struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
- const struct stmpe_keypad_platform_data *plat;
+ struct device_node *np = pdev->dev.of_node;
struct stmpe_keypad *keypad;
struct input_dev *input;
+ u32 rows;
+ u32 cols;
int error;
int irq;
- plat = stmpe->pdata->keypad;
- if (!plat) {
- plat = stmpe_keypad_of_probe(&pdev->dev);
- if (IS_ERR(plat))
- return PTR_ERR(plat);
- }
-
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
if (!keypad)
return -ENOMEM;
+ keypad->stmpe = stmpe;
+ keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
+
+ of_property_read_u32(np, "debounce-interval", &keypad->debounce_ms);
+ of_property_read_u32(np, "st,scan-count", &keypad->scan_count);
+ keypad->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
+
input = devm_input_allocate_device(&pdev->dev);
if (!input)
return -ENOMEM;
input->id.bustype = BUS_I2C;
input->dev.parent = &pdev->dev;
- error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
- STMPE_KEYPAD_MAX_ROWS,
- STMPE_KEYPAD_MAX_COLS,
+ error = matrix_keypad_parse_of_params(&pdev->dev, &rows, &cols);
+ if (error)
+ return error;
+
+ error = matrix_keypad_build_keymap(NULL, NULL, rows, cols,
keypad->keymap, input);
if (error)
return error;
input_set_capability(input, EV_MSC, MSC_SCAN);
- if (!plat->no_autorepeat)
+ if (!keypad->no_autorepeat)
__set_bit(EV_REP, input->evbit);
- stmpe_keypad_fill_used_pins(keypad);
+ stmpe_keypad_fill_used_pins(keypad, rows, cols);
- keypad->stmpe = stmpe;
- keypad->plat = plat;
keypad->input = input;
- keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
error = stmpe_keypad_chip_init(keypad);
if (error < 0)
projects / cascardo / linux.git / blobdiff