#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/delay.h>
-#include <linux/sched.h>
#include <linux/adb.h>
#include <linux/cuda.h>
#include <linux/spinlock.h>
static unsigned char *reply_ptr;
static int reading_reply;
static int data_index;
+static int cuda_irq;
#ifdef CONFIG_PPC
static struct device_node *vias;
#endif
-static int cuda_fully_inited = 0;
+static int cuda_fully_inited;
#ifdef CONFIG_ADB
static int cuda_probe(void);
static int cuda_init_via(void);
static void cuda_start(void);
-static irqreturn_t cuda_interrupt(int irq, void *arg, struct pt_regs *regs);
-static void cuda_input(unsigned char *buf, int nb, struct pt_regs *regs);
+static irqreturn_t cuda_interrupt(int irq, void *arg);
+static void cuda_input(unsigned char *buf, int nb);
void cuda_poll(void);
static int cuda_write(struct adb_request *req);
if (vias == 0)
return 0;
- reg = get_property(vias, "reg", NULL);
+ reg = of_get_property(vias, "reg", NULL);
if (reg == NULL) {
printk(KERN_ERR "via-cuda: No \"reg\" property !\n");
goto fail;
/* Clear and enable interrupts, but only on PPC. On 68K it's done */
/* for us by the main VIA driver in arch/m68k/mac/via.c */
-#ifndef CONFIG_MAC
out_8(&via[IFR], 0x7f); /* clear interrupts by writing 1s */
out_8(&via[IER], IER_SET|SR_INT); /* enable interrupt from SR */
-#endif
/* enable autopoll */
cuda_request(&req, NULL, 3, CUDA_PACKET, CUDA_AUTOPOLL, 1);
static int __init via_cuda_start(void)
{
- unsigned int irq;
-
if (via == NULL)
return -ENODEV;
#ifdef CONFIG_MAC
- irq = IRQ_MAC_ADB;
+ cuda_irq = IRQ_MAC_ADB;
#else /* CONFIG_MAC */
- irq = irq_of_parse_and_map(vias, 0);
- if (irq == NO_IRQ) {
+ cuda_irq = irq_of_parse_and_map(vias, 0);
+ if (cuda_irq == NO_IRQ) {
printk(KERN_ERR "via-cuda: can't map interrupts for %s\n",
vias->full_name);
return -ENODEV;
}
-#endif /* CONFIG_MAP */
+#endif /* CONFIG_MAC */
- if (request_irq(irq, cuda_interrupt, 0, "ADB", cuda_interrupt)) {
- printk(KERN_ERR "via-cuda: can't request irq %d\n", irq);
+ if (request_irq(cuda_irq, cuda_interrupt, 0, "ADB", cuda_interrupt)) {
+ printk(KERN_ERR "via-cuda: can't request irq %d\n", cuda_irq);
return -EAGAIN;
}
printk(KERN_ERR "cuda_init_via() failed\n");
return -ENODEV;
}
+ out_8(&via[IER], IER_SET|SR_INT); /* enable interrupt from SR */
return via_cuda_start();
#endif
out_8(&via[B], in_8(&via[B]) | TACK | TIP); /* negate them */
out_8(&via[ACR] ,(in_8(&via[ACR]) & ~SR_CTRL) | SR_EXT); /* SR data in */
(void)in_8(&via[SR]); /* clear any left-over data */
-#ifndef CONFIG_MAC
+#ifdef CONFIG_PPC
out_8(&via[IER], 0x7f); /* disable interrupts from VIA */
(void)in_8(&via[IER]);
+#else
+ out_8(&via[IER], SR_INT); /* disable SR interrupt from VIA */
#endif
/* delay 4ms and then clear any pending interrupt */
mdelay(4);
(void)in_8(&via[SR]);
- out_8(&via[IFR], in_8(&via[IFR]) & 0x7f);
+ out_8(&via[IFR], SR_INT);
/* sync with the CUDA - assert TACK without TIP */
out_8(&via[B], in_8(&via[B]) & ~TACK);
/* wait for the interrupt and then clear it */
WAIT_FOR(in_8(&via[IFR]) & SR_INT, "CUDA response to sync (2)");
(void)in_8(&via[SR]);
- out_8(&via[IFR], in_8(&via[IFR]) & 0x7f);
+ out_8(&via[IFR], SR_INT);
/* finish the sync by negating TACK */
out_8(&via[B], in_8(&via[B]) | TACK);
WAIT_FOR(in_8(&via[B]) & TREQ, "CUDA response to sync (3)");
WAIT_FOR(in_8(&via[IFR]) & SR_INT, "CUDA response to sync (4)");
(void)in_8(&via[SR]);
- out_8(&via[IFR], in_8(&via[IFR]) & 0x7f);
+ out_8(&via[IFR], SR_INT);
out_8(&via[B], in_8(&via[B]) | TIP); /* should be unnecessary */
return 0;
void
cuda_poll(void)
{
- unsigned long flags;
-
/* cuda_interrupt only takes a normal lock, we disable
* interrupts here to avoid re-entering and thus deadlocking.
- * An option would be to disable only the IRQ source with
- * disable_irq(), would that work on m68k ? --BenH
*/
- local_irq_save(flags);
- cuda_interrupt(0, NULL, NULL);
- local_irq_restore(flags);
+ disable_irq(cuda_irq);
+ cuda_interrupt(0, NULL);
+ enable_irq(cuda_irq);
}
static irqreturn_t
-cuda_interrupt(int irq, void *arg, struct pt_regs *regs)
+cuda_interrupt(int irq, void *arg)
{
int status;
struct adb_request *req = NULL;
unsigned char ibuf[16];
int ibuf_len = 0;
int complete = 0;
- unsigned char virq;
spin_lock(&cuda_lock);
- virq = in_8(&via[IFR]) & 0x7f;
- out_8(&via[IFR], virq);
- if ((virq & SR_INT) == 0) {
- spin_unlock(&cuda_lock);
- return IRQ_NONE;
+ /* On powermacs, this handler is registered for the VIA IRQ. But it uses
+ * just the shift register IRQ -- other VIA interrupt sources are disabled.
+ * On m68k macs, the VIA IRQ sources are dispatched individually. Unless
+ * we are polling, the shift register IRQ flag has already been cleared.
+ */
+
+#ifdef CONFIG_MAC
+ if (!arg)
+#endif
+ {
+ if ((in_8(&via[IFR]) & SR_INT) == 0) {
+ spin_unlock(&cuda_lock);
+ return IRQ_NONE;
+ } else {
+ out_8(&via[IFR], SR_INT);
+ }
}
status = (~in_8(&via[B]) & (TIP|TREQ)) | (in_8(&via[ACR]) & SR_OUT);
(*done)(req);
}
if (ibuf_len)
- cuda_input(ibuf, ibuf_len, regs);
+ cuda_input(ibuf, ibuf_len);
return IRQ_HANDLED;
}
static void
-cuda_input(unsigned char *buf, int nb, struct pt_regs *regs)
+cuda_input(unsigned char *buf, int nb)
{
int i;
}
#endif /* CONFIG_XMON */
#ifdef CONFIG_ADB
- adb_input(buf+2, nb-2, regs, buf[1] & 0x40);
+ adb_input(buf+2, nb-2, buf[1] & 0x40);
#endif /* CONFIG_ADB */
break;
projects / cascardo / linux.git / blobdiff