--- /dev/null
+#include "drxk_map.h"
+
+#define DRXK_VERSION_MAJOR 0
+#define DRXK_VERSION_MINOR 9
+#define DRXK_VERSION_PATCH 4300
+
+#define HI_I2C_DELAY 42
+#define HI_I2C_BRIDGE_DELAY 350
+#define DRXK_MAX_RETRIES 100
+
+#define DRIVER_4400 1
+
+#define DRXX_JTAGID 0x039210D9
+#define DRXX_J_JTAGID 0x239310D9
+#define DRXX_K_JTAGID 0x039210D9
+
+#define DRX_UNKNOWN 254
+#define DRX_AUTO 255
+
+#define DRX_SCU_READY 0
+#define DRXK_MAX_WAITTIME (200)
+#define SCU_RESULT_OK 0
+#define SCU_RESULT_SIZE -4
+#define SCU_RESULT_INVPAR -3
+#define SCU_RESULT_UNKSTD -2
+#define SCU_RESULT_UNKCMD -1
+
+#ifndef DRXK_OFDM_TR_SHUTDOWN_TIMEOUT
+#define DRXK_OFDM_TR_SHUTDOWN_TIMEOUT (200)
+#endif
+
+#define DRXK_8VSB_MPEG_BIT_RATE 19392658UL /*bps*/
+#define DRXK_DVBT_MPEG_BIT_RATE 32000000UL /*bps*/
+#define DRXK_QAM16_MPEG_BIT_RATE 27000000UL /*bps*/
+#define DRXK_QAM32_MPEG_BIT_RATE 33000000UL /*bps*/
+#define DRXK_QAM64_MPEG_BIT_RATE 40000000UL /*bps*/
+#define DRXK_QAM128_MPEG_BIT_RATE 46000000UL /*bps*/
+#define DRXK_QAM256_MPEG_BIT_RATE 52000000UL /*bps*/
+#define DRXK_MAX_MPEG_BIT_RATE 52000000UL /*bps*/
+
+#define IQM_CF_OUT_ENA_OFDM__M 0x4
+#define IQM_FS_ADJ_SEL_B_QAM 0x1
+#define IQM_FS_ADJ_SEL_B_OFF 0x0
+#define IQM_FS_ADJ_SEL_B_VSB 0x2
+#define IQM_RC_ADJ_SEL_B_OFF 0x0
+#define IQM_RC_ADJ_SEL_B_QAM 0x1
+#define IQM_RC_ADJ_SEL_B_VSB 0x2
+
+enum OperationMode {
+ OM_NONE,
+ OM_QAM_ITU_A,
+ OM_QAM_ITU_B,
+ OM_QAM_ITU_C,
+ OM_DVBT
+};
+
+enum DRXPowerMode {
+ DRX_POWER_UP = 0,
+ DRX_POWER_MODE_1,
+ DRX_POWER_MODE_2,
+ DRX_POWER_MODE_3,
+ DRX_POWER_MODE_4,
+ DRX_POWER_MODE_5,
+ DRX_POWER_MODE_6,
+ DRX_POWER_MODE_7,
+ DRX_POWER_MODE_8,
+
+ DRX_POWER_MODE_9,
+ DRX_POWER_MODE_10,
+ DRX_POWER_MODE_11,
+ DRX_POWER_MODE_12,
+ DRX_POWER_MODE_13,
+ DRX_POWER_MODE_14,
+ DRX_POWER_MODE_15,
+ DRX_POWER_MODE_16,
+ DRX_POWER_DOWN = 255
+};
+
+
+/** /brief Intermediate power mode for DRXK, power down OFDM clock domain */
+#ifndef DRXK_POWER_DOWN_OFDM
+#define DRXK_POWER_DOWN_OFDM DRX_POWER_MODE_1
+#endif
+
+/** /brief Intermediate power mode for DRXK, power down core (sysclk) */
+#ifndef DRXK_POWER_DOWN_CORE
+#define DRXK_POWER_DOWN_CORE DRX_POWER_MODE_9
+#endif
+
+/** /brief Intermediate power mode for DRXK, power down pll (only osc runs) */
+#ifndef DRXK_POWER_DOWN_PLL
+#define DRXK_POWER_DOWN_PLL DRX_POWER_MODE_10
+#endif
+
+
+enum AGC_CTRL_MODE { DRXK_AGC_CTRL_AUTO = 0, DRXK_AGC_CTRL_USER, DRXK_AGC_CTRL_OFF };
+enum EDrxkState {
+ DRXK_UNINITIALIZED = 0,
+ DRXK_STOPPED,
+ DRXK_DTV_STARTED,
+ DRXK_ATV_STARTED,
+ DRXK_POWERED_DOWN,
+ DRXK_NO_DEV /* If drxk init failed */
+};
+
+enum EDrxkCoefArrayIndex {
+ DRXK_COEF_IDX_MN = 0,
+ DRXK_COEF_IDX_FM ,
+ DRXK_COEF_IDX_L ,
+ DRXK_COEF_IDX_LP ,
+ DRXK_COEF_IDX_BG ,
+ DRXK_COEF_IDX_DK ,
+ DRXK_COEF_IDX_I ,
+ DRXK_COEF_IDX_MAX
+};
+enum EDrxkSifAttenuation {
+ DRXK_SIF_ATTENUATION_0DB,
+ DRXK_SIF_ATTENUATION_3DB,
+ DRXK_SIF_ATTENUATION_6DB,
+ DRXK_SIF_ATTENUATION_9DB
+};
+enum EDrxkConstellation {
+ DRX_CONSTELLATION_BPSK = 0,
+ DRX_CONSTELLATION_QPSK,
+ DRX_CONSTELLATION_PSK8,
+ DRX_CONSTELLATION_QAM16,
+ DRX_CONSTELLATION_QAM32,
+ DRX_CONSTELLATION_QAM64,
+ DRX_CONSTELLATION_QAM128,
+ DRX_CONSTELLATION_QAM256,
+ DRX_CONSTELLATION_QAM512,
+ DRX_CONSTELLATION_QAM1024,
+ DRX_CONSTELLATION_UNKNOWN = DRX_UNKNOWN,
+ DRX_CONSTELLATION_AUTO = DRX_AUTO
+};
+enum EDrxkInterleaveMode {
+ DRXK_QAM_I12_J17 = 16,
+ DRXK_QAM_I_UNKNOWN = DRX_UNKNOWN
+};
+enum {
+ DRXK_SPIN_A1 = 0,
+ DRXK_SPIN_A2,
+ DRXK_SPIN_A3,
+ DRXK_SPIN_UNKNOWN
+};
+
+enum DRXKCfgDvbtSqiSpeed {
+ DRXK_DVBT_SQI_SPEED_FAST = 0,
+ DRXK_DVBT_SQI_SPEED_MEDIUM,
+ DRXK_DVBT_SQI_SPEED_SLOW,
+ DRXK_DVBT_SQI_SPEED_UNKNOWN = DRX_UNKNOWN
+} ;
+
+enum DRXFftmode_t {
+ DRX_FFTMODE_2K = 0,
+ DRX_FFTMODE_4K,
+ DRX_FFTMODE_8K,
+ DRX_FFTMODE_UNKNOWN = DRX_UNKNOWN,
+ DRX_FFTMODE_AUTO = DRX_AUTO
+};
+
+enum DRXMPEGStrWidth_t {
+ DRX_MPEG_STR_WIDTH_1,
+ DRX_MPEG_STR_WIDTH_8
+};
+
+enum DRXQamLockRange_t {
+ DRX_QAM_LOCKRANGE_NORMAL,
+ DRX_QAM_LOCKRANGE_EXTENDED
+};
+
+struct DRXKCfgDvbtEchoThres_t {
+ u16 threshold;
+ enum DRXFftmode_t fftMode;
+} ;
+
+struct SCfgAgc {
+ enum AGC_CTRL_MODE ctrlMode; /* off, user, auto */
+ u16 outputLevel; /* range dependent on AGC */
+ u16 minOutputLevel; /* range dependent on AGC */
+ u16 maxOutputLevel; /* range dependent on AGC */
+ u16 speed; /* range dependent on AGC */
+ u16 top; /* rf-agc take over point */
+ u16 cutOffCurrent; /* rf-agc is accelerated if output current
+ is below cut-off current */
+ u16 IngainTgtMax;
+ u16 FastClipCtrlDelay;
+};
+
+struct SCfgPreSaw {
+ u16 reference; /* pre SAW reference value, range 0 .. 31 */
+ bool usePreSaw; /* TRUE algorithms must use pre SAW sense */
+};
+
+struct DRXKOfdmScCmd_t {
+ u16 cmd; /**< Command number */
+ u16 subcmd; /**< Sub-command parameter*/
+ u16 param0; /**< General purpous param */
+ u16 param1; /**< General purpous param */
+ u16 param2; /**< General purpous param */
+ u16 param3; /**< General purpous param */
+ u16 param4; /**< General purpous param */
+};
+
+struct drxk_state {
+ struct dvb_frontend frontend;
+ struct dtv_frontend_properties props;
+ struct device *dev;
+
+ struct i2c_adapter *i2c;
+ u8 demod_address;
+ void *priv;
+
+ struct mutex mutex;
+
+ u32 m_Instance; /**< Channel 1,2,3 or 4 */
+
+ int m_ChunkSize;
+ u8 Chunk[256];
+
+ bool m_hasLNA;
+ bool m_hasDVBT;
+ bool m_hasDVBC;
+ bool m_hasAudio;
+ bool m_hasATV;
+ bool m_hasOOB;
+ bool m_hasSAWSW; /**< TRUE if mat_tx is available */
+ bool m_hasGPIO1; /**< TRUE if mat_rx is available */
+ bool m_hasGPIO2; /**< TRUE if GPIO is available */
+ bool m_hasIRQN; /**< TRUE if IRQN is available */
+ u16 m_oscClockFreq;
+ u16 m_HICfgTimingDiv;
+ u16 m_HICfgBridgeDelay;
+ u16 m_HICfgWakeUpKey;
+ u16 m_HICfgTimeout;
+ u16 m_HICfgCtrl;
+ s32 m_sysClockFreq; /**< system clock frequency in kHz */
+
+ enum EDrxkState m_DrxkState; /**< State of Drxk (init,stopped,started) */
+ enum OperationMode m_OperationMode; /**< digital standards */
+ struct SCfgAgc m_vsbRfAgcCfg; /**< settings for VSB RF-AGC */
+ struct SCfgAgc m_vsbIfAgcCfg; /**< settings for VSB IF-AGC */
+ u16 m_vsbPgaCfg; /**< settings for VSB PGA */
+ struct SCfgPreSaw m_vsbPreSawCfg; /**< settings for pre SAW sense */
+ s32 m_Quality83percent; /**< MER level (*0.1 dB) for 83% quality indication */
+ s32 m_Quality93percent; /**< MER level (*0.1 dB) for 93% quality indication */
+ bool m_smartAntInverted;
+ bool m_bDebugEnableBridge;
+ bool m_bPDownOpenBridge; /**< only open DRXK bridge before power-down once it has been accessed */
+ bool m_bPowerDown; /**< Power down when not used */
+
+ u32 m_IqmFsRateOfs; /**< frequency shift as written to DRXK register (28bit fixpoint) */
+
+ bool m_enableMPEGOutput; /**< If TRUE, enable MPEG output */
+ bool m_insertRSByte; /**< If TRUE, insert RS byte */
+ bool m_enableParallel; /**< If TRUE, parallel out otherwise serial */
+ bool m_invertDATA; /**< If TRUE, invert DATA signals */
+ bool m_invertERR; /**< If TRUE, invert ERR signal */
+ bool m_invertSTR; /**< If TRUE, invert STR signals */
+ bool m_invertVAL; /**< If TRUE, invert VAL signals */
+ bool m_invertCLK; /**< If TRUE, invert CLK signals */
+ bool m_DVBCStaticCLK;
+ bool m_DVBTStaticCLK; /**< If TRUE, static MPEG clockrate will
+ be used, otherwise clockrate will
+ adapt to the bitrate of the TS */
+ u32 m_DVBTBitrate;
+ u32 m_DVBCBitrate;
+
+ u8 m_TSDataStrength;
+ u8 m_TSClockkStrength;
+
+ bool m_itut_annex_c; /* If true, uses ITU-T DVB-C Annex C, instead of Annex A */
+
+ enum DRXMPEGStrWidth_t m_widthSTR; /**< MPEG start width */
+ u32 m_mpegTsStaticBitrate; /**< Maximum bitrate in b/s in case
+ static clockrate is selected */
+
+ /* LARGE_INTEGER m_StartTime; */ /**< Contains the time of the last demod start */
+ s32 m_MpegLockTimeOut; /**< WaitForLockStatus Timeout (counts from start time) */
+ s32 m_DemodLockTimeOut; /**< WaitForLockStatus Timeout (counts from start time) */
+
+ bool m_disableTEIhandling;
+
+ bool m_RfAgcPol;
+ bool m_IfAgcPol;
+
+ struct SCfgAgc m_atvRfAgcCfg; /**< settings for ATV RF-AGC */
+ struct SCfgAgc m_atvIfAgcCfg; /**< settings for ATV IF-AGC */
+ struct SCfgPreSaw m_atvPreSawCfg; /**< settings for ATV pre SAW sense */
+ bool m_phaseCorrectionBypass;
+ s16 m_atvTopVidPeak;
+ u16 m_atvTopNoiseTh;
+ enum EDrxkSifAttenuation m_sifAttenuation;
+ bool m_enableCVBSOutput;
+ bool m_enableSIFOutput;
+ bool m_bMirrorFreqSpect;
+ enum EDrxkConstellation m_Constellation; /**< Constellation type of the channel */
+ u32 m_CurrSymbolRate; /**< Current QAM symbol rate */
+ struct SCfgAgc m_qamRfAgcCfg; /**< settings for QAM RF-AGC */
+ struct SCfgAgc m_qamIfAgcCfg; /**< settings for QAM IF-AGC */
+ u16 m_qamPgaCfg; /**< settings for QAM PGA */
+ struct SCfgPreSaw m_qamPreSawCfg; /**< settings for QAM pre SAW sense */
+ enum EDrxkInterleaveMode m_qamInterleaveMode; /**< QAM Interleave mode */
+ u16 m_fecRsPlen;
+ u16 m_fecRsPrescale;
+
+ enum DRXKCfgDvbtSqiSpeed m_sqiSpeed;
+
+ u16 m_GPIO;
+ u16 m_GPIOCfg;
+
+ struct SCfgAgc m_dvbtRfAgcCfg; /**< settings for QAM RF-AGC */
+ struct SCfgAgc m_dvbtIfAgcCfg; /**< settings for QAM IF-AGC */
+ struct SCfgPreSaw m_dvbtPreSawCfg; /**< settings for QAM pre SAW sense */
+
+ u16 m_agcFastClipCtrlDelay;
+ bool m_adcCompPassed;
+ u16 m_adcCompCoef[64];
+ u16 m_adcState;
+
+ u8 *m_microcode;
+ int m_microcode_length;
+ bool m_DRXK_A1_PATCH_CODE;
+ bool m_DRXK_A1_ROM_CODE;
+ bool m_DRXK_A2_ROM_CODE;
+ bool m_DRXK_A3_ROM_CODE;
+ bool m_DRXK_A2_PATCH_CODE;
+ bool m_DRXK_A3_PATCH_CODE;
+
+ bool m_rfmirror;
+ u8 m_deviceSpin;
+ u32 m_iqmRcRate;
+
+ enum DRXPowerMode m_currentPowerMode;
+
+ /* when true, avoids other devices to use the I2C bus */
+ bool drxk_i2c_exclusive_lock;
+
+ /*
+ * Configurable parameters at the driver. They stores the values found
+ * at struct drxk_config.
+ */
+
+ u16 UIO_mask; /* Bits used by UIO */
+
+ bool enable_merr_cfg;
+ bool single_master;
+ bool no_i2c_bridge;
+ bool antenna_dvbt;
+ u16 antenna_gpio;
+
+ /* Firmware */
+ const char *microcode_name;
+ struct completion fw_wait_load;
+ const struct firmware *fw;
+ int qam_demod_parameter_count;
+};
+
+#define NEVER_LOCK 0
+#define NOT_LOCKED 1
+#define DEMOD_LOCK 2
+#define FEC_LOCK 3
+#define MPEG_LOCK 4
+
projects / cascardo / linux.git / blobdiff