*
*/
+#include "au0828.h"
+
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/device.h>
-#include <linux/suspend.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-event.h>
#include <media/tuner.h>
-#include "au0828.h"
#include "au0828-reg.h"
static DEFINE_MUTEX(au0828_sysfs_lock);
#define au0828_isocdbg(fmt, arg...) \
do {\
if (isoc_debug) { \
- printk(KERN_INFO "au0828 %s :"fmt, \
+ pr_info("au0828 %s :"fmt, \
__func__ , ##arg); \
} \
} while (0)
static int check_dev(struct au0828_dev *dev)
{
if (dev->dev_state & DEV_DISCONNECTED) {
- printk(KERN_INFO "v4l2 ioctl: device not present\n");
+ pr_info("v4l2 ioctl: device not present\n");
return -ENODEV;
}
if (dev->dev_state & DEV_MISCONFIGURED) {
- printk(KERN_INFO "v4l2 ioctl: device is misconfigured; "
+ pr_info("v4l2 ioctl: device is misconfigured; "
"close and open it again\n");
return -EIO;
}
au0828_isocdbg("urb resubmit failed (error=%i)\n",
urb->status);
}
+ dev->stream_state = STREAM_ON;
}
/*
dev->isoc_ctl.urb = NULL;
dev->isoc_ctl.transfer_buffer = NULL;
dev->isoc_ctl.num_bufs = 0;
+
+ dev->stream_state = STREAM_OFF;
}
/*
if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
rc = videobuf_iolock(vq, &buf->vb, NULL);
if (rc < 0) {
- printk(KERN_INFO "videobuf_iolock failed\n");
+ pr_info("videobuf_iolock failed\n");
goto fail;
}
}
AU0828_MAX_ISO_BUFS, dev->max_pkt_size,
au0828_isoc_copy);
if (rc < 0) {
- printk(KERN_INFO "au0828_init_isoc failed\n");
+ pr_info("au0828_init_isoc failed\n");
goto fail;
}
}
/* set au0828 interface0 to AS5 here again */
ret = usb_set_interface(d->usbdev, 0, 5);
if (ret < 0) {
- printk(KERN_INFO "Au0828 can't set alt setting to 5!\n");
+ pr_info("Au0828 can't set alt setting to 5!\n");
return -EBUSY;
}
}
USB bandwidth */
ret = usb_set_interface(dev->usbdev, 0, 0);
if (ret < 0)
- printk(KERN_INFO "Au0828 can't set alternate to 0!\n");
+ pr_info("Au0828 can't set alternate to 0!\n");
}
mutex_unlock(&dev->lock);
return rc;
if (videobuf_queue_is_busy(&fh->vb_vidq)) {
- printk(KERN_INFO "%s queue busy\n", __func__);
+ pr_info("%s queue busy\n", __func__);
rc = -EBUSY;
goto out;
}
return rc;
}
+void au0828_v4l2_suspend(struct au0828_dev *dev)
+{
+ struct urb *urb;
+ int i;
+
+ pr_info("stopping V4L2\n");
+
+ if (dev->stream_state == STREAM_ON) {
+ pr_info("stopping V4L2 active URBs\n");
+ au0828_analog_stream_disable(dev);
+ /* stop urbs */
+ for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+ urb = dev->isoc_ctl.urb[i];
+ if (urb) {
+ if (!irqs_disabled())
+ usb_kill_urb(urb);
+ else
+ usb_unlink_urb(urb);
+ }
+ }
+ }
+
+ if (dev->vid_timeout_running)
+ del_timer_sync(&dev->vid_timeout);
+ if (dev->vbi_timeout_running)
+ del_timer_sync(&dev->vbi_timeout);
+}
+
+void au0828_v4l2_resume(struct au0828_dev *dev)
+{
+ int i, rc;
+
+ pr_info("restarting V4L2\n");
+
+ if (dev->stream_state == STREAM_ON) {
+ au0828_stream_interrupt(dev);
+ au0828_init_tuner(dev);
+ }
+
+ if (dev->vid_timeout_running)
+ mod_timer(&dev->vid_timeout, jiffies + (HZ / 10));
+ if (dev->vbi_timeout_running)
+ mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10));
+
+ /* If we were doing ac97 instead of i2s, it would go here...*/
+ au0828_i2s_init(dev);
+
+ au0828_analog_stream_enable(dev);
+
+ if (!(dev->stream_state == STREAM_ON)) {
+ au0828_analog_stream_reset(dev);
+ /* submit urbs */
+ for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+ rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC);
+ if (rc) {
+ au0828_isocdbg("submit of urb %i failed (error=%i)\n",
+ i, rc);
+ au0828_uninit_isoc(dev);
+ }
+ }
+ }
+}
+
static struct v4l2_file_operations au0828_v4l_fops = {
.owner = THIS_MODULE,
.open = au0828_v4l2_open,
retval = usb_set_interface(dev->usbdev,
interface->cur_altsetting->desc.bInterfaceNumber, 5);
if (retval != 0) {
- printk(KERN_INFO "Failure setting usb interface0 to as5\n");
+ pr_info("Failure setting usb interface0 to as5\n");
return retval;
}
}
}
if (!(dev->isoc_in_endpointaddr)) {
- printk(KERN_INFO "Could not locate isoc endpoint\n");
+ pr_info("Could not locate isoc endpoint\n");
kfree(dev);
return -ENODEV;
}