*/
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
-
+#include <linux/of.h>
+#include <linux/irqdomain.h>
#include <linux/i2c/twl.h>
#include "twl-core.h"
* base + 8 .. base + 15 SIH for PWR_INT
* base + 16 .. base + 33 SIH for GPIO
*/
+#define TWL4030_CORE_NR_IRQS 8
+#define TWL4030_PWR_NR_IRQS 8
/* PIH register offsets */
#define REG_PIH_ISR_P1 0x01
#define REG_PIH_ISR_P2 0x02
#define REG_PIH_SIR 0x03 /* for testing */
-
/* Linux could (eventually) use either IRQ line */
static int irq_line;
#define TWL4030_MODULE_INT_PWR TWL4030_MODULE_INT
-/* Order in this table matches order in PIH_ISR. That is,
+/*
+ * Order in this table matches order in PIH_ISR. That is,
* BIT(n) in PIH_ISR is sih_modules[n].
*/
/* sih_modules_twl4030 is used both in twl4030 and twl5030 */
*/
static irqreturn_t handle_twl4030_pih(int irq, void *devid)
{
- int module_irq;
irqreturn_t ret;
u8 pih_isr;
return IRQ_NONE;
}
- /* these handlers deal with the relevant SIH irq status */
- for (module_irq = twl4030_irq_base;
- pih_isr;
- pih_isr >>= 1, module_irq++) {
- if (pih_isr & 0x1)
- handle_nested_irq(module_irq);
+ while (pih_isr) {
+ unsigned long pending = __ffs(pih_isr);
+ unsigned int irq;
+
+ pih_isr &= ~BIT(pending);
+ irq = pending + twl4030_irq_base;
+ handle_nested_irq(irq);
}
return IRQ_HANDLED;
}
+
/*----------------------------------------------------------------------*/
/*
memset(buf, 0xff, sizeof buf);
sih = sih_modules;
for (i = 0; i < nr_sih_modules; i++, sih++) {
-
/* skip USB -- it's funky */
if (!sih->bytes_ixr)
continue;
pr_err("twl4030: err %d initializing %s %s\n",
status, sih->name, "IMR");
- /* Maybe disable "exclusive" mode; buffer second pending irq;
+ /*
+ * Maybe disable "exclusive" mode; buffer second pending irq;
* set Clear-On-Read (COR) bit.
*
* NOTE that sometimes COR polarity is documented as being
if (sih->irq_lines <= line)
continue;
- /* Clear pending interrupt status. Either the read was
+ /*
+ * Clear pending interrupt status. Either the read was
* enough, or we need to write those bits. Repeat, in
* case an IRQ is pending (PENDDIS=0) ... that's not
* uncommon with PWR_INT.PWRON.
status = twl_i2c_write(sih->module, buf,
sih->mask[line].isr_offset,
sih->bytes_ixr);
- /* else COR=1 means read sufficed.
+ /*
+ * else COR=1 means read sufficed.
* (for most SIH modules...)
*/
}
static inline void activate_irq(int irq)
{
#ifdef CONFIG_ARM
- /* ARM requires an extra step to clear IRQ_NOREQUEST, which it
+ /*
+ * ARM requires an extra step to clear IRQ_NOREQUEST, which it
* sets on behalf of every irq_chip. Also sets IRQ_NOPROBE.
*/
set_irq_flags(irq, IRQF_VALID);
return IRQ_HANDLED;
}
-static unsigned twl4030_irq_next;
-
-/* returns the first IRQ used by this SIH bank,
- * or negative errno
- */
-int twl4030_sih_setup(int module)
+/* returns the first IRQ used by this SIH bank, or negative errno */
+int twl4030_sih_setup(struct device *dev, int module, int irq_base)
{
int sih_mod;
const struct sih *sih = NULL;
struct sih_agent *agent;
int i, irq;
int status = -EINVAL;
- unsigned irq_base = twl4030_irq_next;
/* only support modules with standard clear-on-read for now */
- for (sih_mod = 0, sih = sih_modules;
- sih_mod < nr_sih_modules;
+ for (sih_mod = 0, sih = sih_modules; sih_mod < nr_sih_modules;
sih_mod++, sih++) {
if (sih->module == module && sih->set_cor) {
- if (!WARN((irq_base + sih->bits) > NR_IRQS,
- "irq %d for %s too big\n",
- irq_base + sih->bits,
- sih->name))
- status = 0;
+ status = 0;
break;
}
}
+
if (status < 0)
return status;
if (!agent)
return -ENOMEM;
- status = 0;
-
agent->irq_base = irq_base;
agent->sih = sih;
agent->imr = ~0;
activate_irq(irq);
}
- twl4030_irq_next += i;
-
/* replace generic PIH handler (handle_simple_irq) */
irq = sih_mod + twl4030_irq_base;
irq_set_handler_data(irq, agent);
status = request_threaded_irq(irq, NULL, handle_twl4030_sih, 0,
agent->irq_name ?: sih->name, NULL);
- pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", sih->name,
- irq, irq_base, twl4030_irq_next - 1);
+ dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", sih->name,
+ irq, irq_base, irq_base + i - 1);
return status < 0 ? status : irq_base;
}
/* FIXME need a call to reverse twl4030_sih_setup() ... */
-
/*----------------------------------------------------------------------*/
/* FIXME pass in which interrupt line we'll use ... */
#define twl_irq_line 0
-int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
+int twl4030_init_irq(struct device *dev, int irq_num)
{
static struct irq_chip twl4030_irq_chip;
+ int status, i;
+ int irq_base, irq_end, nr_irqs;
+ struct device_node *node = dev->of_node;
- int status;
- int i;
+ /*
+ * TWL core and pwr interrupts must be contiguous because
+ * the hwirqs numbers are defined contiguously from 1 to 15.
+ * Create only one domain for both.
+ */
+ nr_irqs = TWL4030_PWR_NR_IRQS + TWL4030_CORE_NR_IRQS;
+
+ irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
+ if (IS_ERR_VALUE(irq_base)) {
+ dev_err(dev, "Fail to allocate IRQ descs\n");
+ return irq_base;
+ }
+
+ irq_domain_add_legacy(node, nr_irqs, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+
+ irq_end = irq_base + TWL4030_CORE_NR_IRQS;
/*
* Mask and clear all TWL4030 interrupts since initially we do
twl4030_irq_base = irq_base;
- /* install an irq handler for each of the SIH modules;
+ /*
+ * Install an irq handler for each of the SIH modules;
* clone dummy irq_chip since PIH can't *do* anything
*/
twl4030_irq_chip = dummy_irq_chip;
irq_set_nested_thread(i, 1);
activate_irq(i);
}
- twl4030_irq_next = i;
- pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", "PIH",
- irq_num, irq_base, twl4030_irq_next - 1);
+
+ dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", "PIH",
+ irq_num, irq_base, irq_end);
/* ... and the PWR_INT module ... */
- status = twl4030_sih_setup(TWL4030_MODULE_INT);
+ status = twl4030_sih_setup(dev, TWL4030_MODULE_INT, irq_end);
if (status < 0) {
- pr_err("twl4030: sih_setup PWR INT --> %d\n", status);
+ dev_err(dev, "sih_setup PWR INT --> %d\n", status);
goto fail;
}
IRQF_ONESHOT,
"TWL4030-PIH", NULL);
if (status < 0) {
- pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status);
+ dev_err(dev, "could not claim irq%d: %d\n", irq_num, status);
goto fail_rqirq;
}
- return status;
+ return irq_base;
fail_rqirq:
/* clean up twl4030_sih_setup */
fail:
projects / cascardo / linux.git / blobdiff