mmc_hostname(host), mrq->cmd->opcode,
mrq->cmd->arg, mrq->cmd->flags);
- WARN_ON(host->card_busy == NULL);
+ WARN_ON(!host->claimed);
mrq->cmd->error = 0;
mrq->cmd->mrq = mrq;
if (mrq->data) {
+ BUG_ON(mrq->data->blksz > host->max_blk_size);
+ BUG_ON(mrq->data->blocks > host->max_blk_count);
+ BUG_ON(mrq->data->blocks * mrq->data->blksz >
+ host->max_req_size);
+
mrq->cmd->data = mrq->data;
mrq->data->error = 0;
mrq->data->mrq = mrq;
{
struct mmc_request mrq;
- BUG_ON(host->card_busy == NULL);
+ BUG_ON(!host->claimed);
memset(&mrq, 0, sizeof(struct mmc_request));
int i, err;
- BUG_ON(host->card_busy == NULL);
+ BUG_ON(!host->claimed);
BUG_ON(retries < 0);
err = MMC_ERR_INVALID;
else
limit_us = 100000;
- if (timeout_us > limit_us) {
+ /*
+ * SDHC cards always use these fixed values.
+ */
+ if (timeout_us > limit_us || mmc_card_blockaddr(card)) {
data->timeout_ns = limit_us * 1000;
data->timeout_clks = 0;
}
spin_lock_irqsave(&host->lock, flags);
while (1) {
set_current_state(TASK_UNINTERRUPTIBLE);
- if (host->card_busy == NULL)
+ if (!host->claimed)
break;
spin_unlock_irqrestore(&host->lock, flags);
schedule();
spin_lock_irqsave(&host->lock, flags);
}
set_current_state(TASK_RUNNING);
- host->card_busy = card;
+ host->claimed = 1;
spin_unlock_irqrestore(&host->lock, flags);
remove_wait_queue(&host->wq, &wait);
{
unsigned long flags;
- BUG_ON(host->card_busy == NULL);
+ BUG_ON(!host->claimed);
spin_lock_irqsave(&host->lock, flags);
- host->card_busy = NULL;
+ host->claimed = 0;
spin_unlock_irqrestore(&host->lock, flags);
wake_up(&host->wq);
{
struct mmc_ios *ios = &host->ios;
- pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n",
+ pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u "
+ "width %u timing %u\n",
mmc_hostname(host), ios->clock, ios->bus_mode,
ios->power_mode, ios->chip_select, ios->vdd,
- ios->bus_width);
-
+ ios->bus_width, ios->timing);
+
host->ops->set_ios(host, ios);
}
int err;
struct mmc_command cmd;
- BUG_ON(host->card_busy == NULL);
+ BUG_ON(!host->claimed);
if (host->card_selected == card)
return MMC_ERR_NONE;
if (mmc_card_sd(card)) {
csd_struct = UNSTUFF_BITS(resp, 126, 2);
- if (csd_struct != 0) {
+
+ switch (csd_struct) {
+ case 0:
+ m = UNSTUFF_BITS(resp, 115, 4);
+ e = UNSTUFF_BITS(resp, 112, 3);
+ csd->tacc_ns = (tacc_exp[e] * tacc_mant[m] + 9) / 10;
+ csd->tacc_clks = UNSTUFF_BITS(resp, 104, 8) * 100;
+
+ m = UNSTUFF_BITS(resp, 99, 4);
+ e = UNSTUFF_BITS(resp, 96, 3);
+ csd->max_dtr = tran_exp[e] * tran_mant[m];
+ csd->cmdclass = UNSTUFF_BITS(resp, 84, 12);
+
+ e = UNSTUFF_BITS(resp, 47, 3);
+ m = UNSTUFF_BITS(resp, 62, 12);
+ csd->capacity = (1 + m) << (e + 2);
+
+ csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4);
+ csd->read_partial = UNSTUFF_BITS(resp, 79, 1);
+ csd->write_misalign = UNSTUFF_BITS(resp, 78, 1);
+ csd->read_misalign = UNSTUFF_BITS(resp, 77, 1);
+ csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
+ csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
+ csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
+ break;
+ case 1:
+ /*
+ * This is a block-addressed SDHC card. Most
+ * interesting fields are unused and have fixed
+ * values. To avoid getting tripped by buggy cards,
+ * we assume those fixed values ourselves.
+ */
+ mmc_card_set_blockaddr(card);
+
+ csd->tacc_ns = 0; /* Unused */
+ csd->tacc_clks = 0; /* Unused */
+
+ m = UNSTUFF_BITS(resp, 99, 4);
+ e = UNSTUFF_BITS(resp, 96, 3);
+ csd->max_dtr = tran_exp[e] * tran_mant[m];
+ csd->cmdclass = UNSTUFF_BITS(resp, 84, 12);
+
+ m = UNSTUFF_BITS(resp, 48, 22);
+ csd->capacity = (1 + m) << 10;
+
+ csd->read_blkbits = 9;
+ csd->read_partial = 0;
+ csd->write_misalign = 0;
+ csd->read_misalign = 0;
+ csd->r2w_factor = 4; /* Unused */
+ csd->write_blkbits = 9;
+ csd->write_partial = 0;
+ break;
+ default:
printk("%s: unrecognised CSD structure version %d\n",
mmc_hostname(card->host), csd_struct);
mmc_card_set_bad(card);
return;
}
-
- m = UNSTUFF_BITS(resp, 115, 4);
- e = UNSTUFF_BITS(resp, 112, 3);
- csd->tacc_ns = (tacc_exp[e] * tacc_mant[m] + 9) / 10;
- csd->tacc_clks = UNSTUFF_BITS(resp, 104, 8) * 100;
-
- m = UNSTUFF_BITS(resp, 99, 4);
- e = UNSTUFF_BITS(resp, 96, 3);
- csd->max_dtr = tran_exp[e] * tran_mant[m];
- csd->cmdclass = UNSTUFF_BITS(resp, 84, 12);
-
- e = UNSTUFF_BITS(resp, 47, 3);
- m = UNSTUFF_BITS(resp, 62, 12);
- csd->capacity = (1 + m) << (e + 2);
-
- csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4);
- csd->read_partial = UNSTUFF_BITS(resp, 79, 1);
- csd->write_misalign = UNSTUFF_BITS(resp, 78, 1);
- csd->read_misalign = UNSTUFF_BITS(resp, 77, 1);
- csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
- csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
- csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
} else {
/*
* We only understand CSD structure v1.1 and v1.2.
host->ios.chip_select = MMC_CS_DONTCARE;
host->ios.power_mode = MMC_POWER_UP;
host->ios.bus_width = MMC_BUS_WIDTH_1;
+ host->ios.timing = MMC_TIMING_LEGACY;
mmc_set_ios(host);
mmc_delay(1);
host->ios.chip_select = MMC_CS_DONTCARE;
host->ios.power_mode = MMC_POWER_OFF;
host->ios.bus_width = MMC_BUS_WIDTH_1;
+ host->ios.timing = MMC_TIMING_LEGACY;
mmc_set_ios(host);
}
return err;
}
+static int mmc_send_if_cond(struct mmc_host *host, u32 ocr, int *rsd2)
+{
+ struct mmc_command cmd;
+ int err, sd2;
+ static const u8 test_pattern = 0xAA;
+
+ /*
+ * To support SD 2.0 cards, we must always invoke SD_SEND_IF_COND
+ * before SD_APP_OP_COND. This command will harmlessly fail for
+ * SD 1.0 cards.
+ */
+ cmd.opcode = SD_SEND_IF_COND;
+ cmd.arg = ((ocr & 0xFF8000) != 0) << 8 | test_pattern;
+ cmd.flags = MMC_RSP_R7 | MMC_CMD_BCR;
+
+ err = mmc_wait_for_cmd(host, &cmd, 0);
+ if (err == MMC_ERR_NONE) {
+ if ((cmd.resp[0] & 0xFF) == test_pattern) {
+ sd2 = 1;
+ } else {
+ sd2 = 0;
+ err = MMC_ERR_FAILED;
+ }
+ } else {
+ /*
+ * Treat errors as SD 1.0 card.
+ */
+ sd2 = 0;
+ err = MMC_ERR_NONE;
+ }
+ if (rsd2)
+ *rsd2 = sd2;
+ return err;
+}
+
/*
* Discover cards by requesting their CID. If this command
* times out, it is not an error; there are no further cards
mmc_wait_for_req(host, &mrq);
if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
- mmc_card_set_dead(card);
+ printk("%s: unable to read EXT_CSD, performance "
+ "might suffer.\n", mmc_hostname(card->host));
continue;
}
printk("%s: card is mmc v4 but doesn't support "
"any high-speed modes.\n",
mmc_hostname(card->host));
- mmc_card_set_bad(card);
continue;
}
- /* Activate highspeed support. */
- cmd.opcode = MMC_SWITCH;
- cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
- (EXT_CSD_HS_TIMING << 16) |
- (1 << 8) |
- EXT_CSD_CMD_SET_NORMAL;
- cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+ if (host->caps & MMC_CAP_MMC_HIGHSPEED) {
+ /* Activate highspeed support. */
+ cmd.opcode = MMC_SWITCH;
+ cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+ (EXT_CSD_HS_TIMING << 16) |
+ (1 << 8) |
+ EXT_CSD_CMD_SET_NORMAL;
+ cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
- if (err != MMC_ERR_NONE) {
- printk("%s: failed to switch card to mmc v4 "
- "high-speed mode.\n",
- mmc_hostname(card->host));
- continue;
- }
+ err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
+ if (err != MMC_ERR_NONE) {
+ printk("%s: failed to switch card to mmc v4 "
+ "high-speed mode.\n",
+ mmc_hostname(card->host));
+ continue;
+ }
- mmc_card_set_highspeed(card);
+ mmc_card_set_highspeed(card);
- /* Check for host support for wide-bus modes. */
- if (!(host->caps & MMC_CAP_4_BIT_DATA)) {
- continue;
+ host->ios.timing = MMC_TIMING_SD_HS;
+ mmc_set_ios(host);
}
- /* Activate 4-bit support. */
- cmd.opcode = MMC_SWITCH;
- cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
- (EXT_CSD_BUS_WIDTH << 16) |
- (EXT_CSD_BUS_WIDTH_4 << 8) |
- EXT_CSD_CMD_SET_NORMAL;
- cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+ /* Check for host support for wide-bus modes. */
+ if (host->caps & MMC_CAP_4_BIT_DATA) {
+ /* Activate 4-bit support. */
+ cmd.opcode = MMC_SWITCH;
+ cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+ (EXT_CSD_BUS_WIDTH << 16) |
+ (EXT_CSD_BUS_WIDTH_4 << 8) |
+ EXT_CSD_CMD_SET_NORMAL;
+ cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
- if (err != MMC_ERR_NONE) {
- printk("%s: failed to switch card to "
- "mmc v4 4-bit bus mode.\n",
- mmc_hostname(card->host));
- continue;
- }
+ err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
+ if (err != MMC_ERR_NONE) {
+ printk("%s: failed to switch card to "
+ "mmc v4 4-bit bus mode.\n",
+ mmc_hostname(card->host));
+ continue;
+ }
- host->ios.bus_width = MMC_BUS_WIDTH_4;
+ host->ios.bus_width = MMC_BUS_WIDTH_4;
+ mmc_set_ios(host);
+ }
}
kfree(ext_csd);
unsigned char *status;
struct scatterlist sg;
+ if (!(host->caps & MMC_CAP_SD_HIGHSPEED))
+ return;
+
status = kmalloc(64, GFP_KERNEL);
if (!status) {
printk(KERN_WARNING "%s: Unable to allocate buffer for "
mmc_wait_for_req(host, &mrq);
if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
- mmc_card_set_dead(card);
+ printk("%s: unable to read switch capabilities, "
+ "performance might suffer.\n",
+ mmc_hostname(card->host));
continue;
}
mmc_wait_for_req(host, &mrq);
- if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
- mmc_card_set_dead(card);
- continue;
- }
-
- if ((status[16] & 0xF) != 1) {
+ if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE ||
+ (status[16] & 0xF) != 1) {
printk(KERN_WARNING "%s: Problem switching card "
"into high-speed mode!\n",
mmc_hostname(host));
}
mmc_card_set_highspeed(card);
+
+ host->ios.timing = MMC_TIMING_SD_HS;
+ mmc_set_ios(host);
}
kfree(status);
mmc_power_up(host);
mmc_idle_cards(host);
+ err = mmc_send_if_cond(host, host->ocr_avail, NULL);
+ if (err != MMC_ERR_NONE) {
+ return;
+ }
err = mmc_send_app_op_cond(host, 0, &ocr);
/*
* all get the idea that they should be ready for CMD2.
* (My SanDisk card seems to need this.)
*/
- if (host->mode == MMC_MODE_SD)
- mmc_send_app_op_cond(host, host->ocr, NULL);
- else
+ if (host->mode == MMC_MODE_SD) {
+ int err, sd2;
+ err = mmc_send_if_cond(host, host->ocr, &sd2);
+ if (err == MMC_ERR_NONE) {
+ /*
+ * If SD_SEND_IF_COND indicates an SD 2.0
+ * compliant card and we should set bit 30
+ * of the ocr to indicate that we can handle
+ * block-addressed SDHC cards.
+ */
+ mmc_send_app_op_cond(host, host->ocr | (sd2 << 30), NULL);
+ }
+ } else {
mmc_send_op_cond(host, host->ocr, NULL);
+ }
mmc_discover_cards(host);
*/
host->max_hw_segs = 1;
host->max_phys_segs = 1;
- host->max_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
host->max_seg_size = PAGE_CACHE_SIZE;
+
+ host->max_req_size = PAGE_CACHE_SIZE;
+ host->max_blk_size = 512;
+ host->max_blk_count = PAGE_CACHE_SIZE / 512;
}
return host;