void bcmgenet_mii_setup(struct net_device *dev)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
- struct phy_device *phydev = dev->phydev;
+ struct phy_device *phydev = priv->phydev;
u32 reg, cmd_bits = 0;
bool status_changed = false;
if (GENET_IS_V4(priv))
return;
- if (dev->phydev) {
- phy_init_hw(dev->phydev);
- phy_start_aneg(dev->phydev);
+ if (priv->phydev) {
+ phy_init_hw(priv->phydev);
+ phy_start_aneg(priv->phydev);
}
}
static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv)
{
- struct net_device *ndev = priv->dev;
u32 reg;
/* Speed settings are set in bcmgenet_mii_setup() */
bcmgenet_sys_writel(priv, reg, SYS_PORT_CTRL);
if (priv->hw_params->flags & GENET_HAS_MOCA_LINK_DET)
- fixed_phy_set_link_update(ndev->phydev,
+ fixed_phy_set_link_update(priv->phydev,
bcmgenet_fixed_phy_link_update);
}
int bcmgenet_mii_config(struct net_device *dev)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
- struct phy_device *phydev = dev->phydev;
+ struct phy_device *phydev = priv->phydev;
struct device *kdev = &priv->pdev->dev;
const char *phy_name = NULL;
u32 id_mode_dis = 0;
* capabilities, use that knowledge to also configure the
* Reverse MII interface correctly.
*/
- if ((phydev->supported & PHY_BASIC_FEATURES) ==
+ if ((priv->phydev->supported & PHY_BASIC_FEATURES) ==
PHY_BASIC_FEATURES)
port_ctrl = PORT_MODE_EXT_RVMII_25;
else
return -ENODEV;
}
} else {
- phydev = dev->phydev;
+ phydev = priv->phydev;
phydev->dev_flags = phy_flags;
ret = phy_connect_direct(dev, phydev, bcmgenet_mii_setup,
}
}
+ priv->phydev = phydev;
+
/* Configure port multiplexer based on what the probed PHY device since
* reading the 'max-speed' property determines the maximum supported
* PHY speed which is needed for bcmgenet_mii_config() to configure
*/
ret = bcmgenet_mii_config(dev);
if (ret) {
- phy_disconnect(phydev);
+ phy_disconnect(priv->phydev);
return ret;
}
* Ethernet MAC ISRs
*/
if (priv->internal_phy)
- phydev->irq = PHY_IGNORE_INTERRUPT;
+ priv->phydev->irq = PHY_IGNORE_INTERRUPT;
return 0;
}
}
+ priv->phydev = phydev;
priv->phy_interface = pd->phy_interface;
return 0;