#define XGMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */
/* XGMAC_INT_STAT reg */
+#define XGMAC_INT_STAT_PMTIM 0x00800000 /* PMT Interrupt Mask */
#define XGMAC_INT_STAT_PMT 0x0080 /* PMT Interrupt Status */
#define XGMAC_INT_STAT_LPI 0x0040 /* LPI Interrupt Status */
writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_STATUS);
writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_INTR_ENA);
+ /* Mask power mgt interrupt */
+ writel(XGMAC_INT_STAT_PMTIM, ioaddr + XGMAC_INT_STAT);
+
/* XGMAC requires AXI bus init. This is a 'magic number' for now */
writel(0x0077000E, ioaddr + XGMAC_DMA_AXI_BUS);
struct sk_buff *skb;
int frame_len;
+ if (!dma_ring_cnt(priv->rx_head, priv->rx_tail, DMA_RX_RING_SZ))
+ break;
+
entry = priv->rx_tail;
p = priv->dma_rx + entry;
if (desc_get_owner(p))
unsigned int pmt = 0;
if (mode & WAKE_MAGIC)
- pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT;
+ pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT_EN;
if (mode & WAKE_UCAST)
pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_GLBL_UNICAST;
return 0;
}
+#endif /* CONFIG_PM_SLEEP */
static SIMPLE_DEV_PM_OPS(xgmac_pm_ops, xgmac_suspend, xgmac_resume);
-#define XGMAC_PM_OPS (&xgmac_pm_ops)
-#else
-#define XGMAC_PM_OPS NULL
-#endif /* CONFIG_PM_SLEEP */
static const struct of_device_id xgmac_of_match[] = {
{ .compatible = "calxeda,hb-xgmac", },
},
.probe = xgmac_probe,
.remove = xgmac_remove,
- .driver.pm = XGMAC_PM_OPS,
+ .driver.pm = &xgmac_pm_ops,
};
module_platform_driver(xgmac_driver);