IXGBE: Set the SW prio_tc values at initialization to the HW setting.

[cascardo/linux.git] / drivers / net / ethernet / intel / e1000e / phy.c

diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index 59c76a6..da2be59 100644 (file)
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -1583,13 +1583,13 @@ s32 e1000e_check_downshift(struct e1000_hw *hw)
        case e1000_phy_gg82563:
        case e1000_phy_bm:
        case e1000_phy_82578:
-               offset  = M88E1000_PHY_SPEC_STATUS;
-               mask    = M88E1000_PSSR_DOWNSHIFT;
+               offset = M88E1000_PHY_SPEC_STATUS;
+               mask = M88E1000_PSSR_DOWNSHIFT;
                break;
        case e1000_phy_igp_2:
        case e1000_phy_igp_3:
-               offset  = IGP01E1000_PHY_LINK_HEALTH;
-               mask    = IGP01E1000_PLHR_SS_DOWNGRADE;
+               offset = IGP01E1000_PHY_LINK_HEALTH;
+               mask = IGP01E1000_PLHR_SS_DOWNGRADE;
                break;
        default:
                /* speed downshift not supported */
@@ -1653,14 +1653,14 @@ s32 e1000_check_polarity_igp(struct e1000_hw *hw)
 
        if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
            IGP01E1000_PSSR_SPEED_1000MBPS) {
-               offset  = IGP01E1000_PHY_PCS_INIT_REG;
-               mask    = IGP01E1000_PHY_POLARITY_MASK;
+               offset = IGP01E1000_PHY_PCS_INIT_REG;
+               mask = IGP01E1000_PHY_POLARITY_MASK;
        } else {
                /* This really only applies to 10Mbps since
                 * there is no polarity for 100Mbps (always 0).
                 */
-               offset  = IGP01E1000_PHY_PORT_STATUS;
-               mask    = IGP01E1000_PSSR_POLARITY_REVERSED;
+               offset = IGP01E1000_PHY_PORT_STATUS;
+               mask = IGP01E1000_PSSR_POLARITY_REVERSED;
        }
 
        ret_val = e1e_rphy(hw, offset, &data);
@@ -1900,7 +1900,7 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
 s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
 {
        struct e1000_phy_info *phy = &hw->phy;
-       s32  ret_val;
+       s32 ret_val;
        u16 phy_data;
        bool link;
 
@@ -2253,7 +2253,7 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
        case M88E1011_I_PHY_ID:
                phy_type = e1000_phy_m88;
                break;
-       case IGP01E1000_I_PHY_ID: /* IGP 1 & 2 share this */
+       case IGP01E1000_I_PHY_ID:       /* IGP 1 & 2 share this */
                phy_type = e1000_phy_igp_2;
                break;
        case GG82563_E_PHY_ID:
@@ -2317,7 +2317,7 @@ s32 e1000e_determine_phy_address(struct e1000_hw *hw)
                        /* If phy_type is valid, break - we found our
                         * PHY address
                         */
-                       if (phy_type  != e1000_phy_unknown)
+                       if (phy_type != e1000_phy_unknown)
                                return 0;
 
                        usleep_range(1000, 2000);