#define DRV_VERSION_MAJOR 1
#define DRV_VERSION_MINOR 2
-#define DRV_VERSION_BUILD 8
+#define DRV_VERSION_BUILD 9
#define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
__stringify(DRV_VERSION_MINOR) "." \
__stringify(DRV_VERSION_BUILD) DRV_KERN
*
* Returns 0 on success, negative value on failure
**/
-#ifdef I40E_FCOE
int i40e_open(struct net_device *netdev)
-#else
-static int i40e_open(struct net_device *netdev)
-#endif
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
}
}
+/**
+ * i40e_config_bridge_mode - Configure the HW bridge mode
+ * @veb: pointer to the bridge instance
+ *
+ * Configure the loop back mode for the LAN VSI that is downlink to the
+ * specified HW bridge instance. It is expected this function is called
+ * when a new HW bridge is instantiated.
+ **/
+static void i40e_config_bridge_mode(struct i40e_veb *veb)
+{
+ struct i40e_pf *pf = veb->pf;
+
+ dev_info(&pf->pdev->dev, "enabling bridge mode: %s\n",
+ veb->bridge_mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB");
+ if (veb->bridge_mode & BRIDGE_MODE_VEPA)
+ i40e_disable_pf_switch_lb(pf);
+ else
+ i40e_enable_pf_switch_lb(pf);
+}
+
/**
* i40e_reconstitute_veb - rebuild the VEB and anything connected to it
* @veb: pointer to the VEB instance
if (ret)
goto end_reconstitute;
- /* Enable LB mode for the main VSI now that it is on a VEB */
- i40e_enable_pf_switch_lb(pf);
+ i40e_config_bridge_mode(veb);
/* create the remaining VSIs attached to this VEB */
for (v = 0; v < pf->num_alloc_vsi; v++) {
return pf->rss_size;
}
+/**
+ * i40e_get_npar_bw_setting - Retrieve BW settings for this PF partition
+ * @pf: board private structure
+ **/
+i40e_status i40e_get_npar_bw_setting(struct i40e_pf *pf)
+{
+ i40e_status status;
+ bool min_valid, max_valid;
+ u32 max_bw, min_bw;
+
+ status = i40e_read_bw_from_alt_ram(&pf->hw, &max_bw, &min_bw,
+ &min_valid, &max_valid);
+
+ if (!status) {
+ if (min_valid)
+ pf->npar_min_bw = min_bw;
+ if (max_valid)
+ pf->npar_max_bw = max_bw;
+ }
+
+ return status;
+}
+
+/**
+ * i40e_set_npar_bw_setting - Set BW settings for this PF partition
+ * @pf: board private structure
+ **/
+i40e_status i40e_set_npar_bw_setting(struct i40e_pf *pf)
+{
+ struct i40e_aqc_configure_partition_bw_data bw_data;
+ i40e_status status;
+
+ /* Set the valid bit for this pf */
+ bw_data.pf_valid_bits = cpu_to_le16(1 << pf->hw.pf_id);
+ bw_data.max_bw[pf->hw.pf_id] = pf->npar_max_bw & I40E_ALT_BW_VALUE_MASK;
+ bw_data.min_bw[pf->hw.pf_id] = pf->npar_min_bw & I40E_ALT_BW_VALUE_MASK;
+
+ /* Set the new bandwidths */
+ status = i40e_aq_configure_partition_bw(&pf->hw, &bw_data, NULL);
+
+ return status;
+}
+
+/**
+ * i40e_commit_npar_bw_setting - Commit BW settings for this PF partition
+ * @pf: board private structure
+ **/
+i40e_status i40e_commit_npar_bw_setting(struct i40e_pf *pf)
+{
+ /* Commit temporary BW setting to permanent NVM image */
+ enum i40e_admin_queue_err last_aq_status;
+ i40e_status ret;
+ u16 nvm_word;
+
+ if (pf->hw.partition_id != 1) {
+ dev_info(&pf->pdev->dev,
+ "Commit BW only works on partition 1! This is partition %d",
+ pf->hw.partition_id);
+ ret = I40E_NOT_SUPPORTED;
+ goto bw_commit_out;
+ }
+
+ /* Acquire NVM for read access */
+ ret = i40e_acquire_nvm(&pf->hw, I40E_RESOURCE_READ);
+ last_aq_status = pf->hw.aq.asq_last_status;
+ if (ret) {
+ dev_info(&pf->pdev->dev,
+ "Cannot acquire NVM for read access, err %d: aq_err %d\n",
+ ret, last_aq_status);
+ goto bw_commit_out;
+ }
+
+ /* Read word 0x10 of NVM - SW compatibility word 1 */
+ ret = i40e_aq_read_nvm(&pf->hw,
+ I40E_SR_NVM_CONTROL_WORD,
+ 0x10, sizeof(nvm_word), &nvm_word,
+ false, NULL);
+ /* Save off last admin queue command status before releasing
+ * the NVM
+ */
+ last_aq_status = pf->hw.aq.asq_last_status;
+ i40e_release_nvm(&pf->hw);
+ if (ret) {
+ dev_info(&pf->pdev->dev, "NVM read error, err %d aq_err %d\n",
+ ret, last_aq_status);
+ goto bw_commit_out;
+ }
+
+ /* Wait a bit for NVM release to complete */
+ msleep(50);
+
+ /* Acquire NVM for write access */
+ ret = i40e_acquire_nvm(&pf->hw, I40E_RESOURCE_WRITE);
+ last_aq_status = pf->hw.aq.asq_last_status;
+ if (ret) {
+ dev_info(&pf->pdev->dev,
+ "Cannot acquire NVM for write access, err %d: aq_err %d\n",
+ ret, last_aq_status);
+ goto bw_commit_out;
+ }
+ /* Write it back out unchanged to initiate update NVM,
+ * which will force a write of the shadow (alt) RAM to
+ * the NVM - thus storing the bandwidth values permanently.
+ */
+ ret = i40e_aq_update_nvm(&pf->hw,
+ I40E_SR_NVM_CONTROL_WORD,
+ 0x10, sizeof(nvm_word),
+ &nvm_word, true, NULL);
+ /* Save off last admin queue command status before releasing
+ * the NVM
+ */
+ last_aq_status = pf->hw.aq.asq_last_status;
+ i40e_release_nvm(&pf->hw);
+ if (ret)
+ dev_info(&pf->pdev->dev,
+ "BW settings NOT SAVED, err %d aq_err %d\n",
+ ret, last_aq_status);
+bw_commit_out:
+
+ return ret;
+}
+
/**
* i40e_sw_init - Initialize general software structures (struct i40e_pf)
* @pf: board private structure to initialize
/* Set default capability flags */
pf->flags = I40E_FLAG_RX_CSUM_ENABLED |
I40E_FLAG_MSI_ENABLED |
- I40E_FLAG_MSIX_ENABLED |
- I40E_FLAG_RX_PS_ENABLED;
+ I40E_FLAG_MSIX_ENABLED;
+
+ if (iommu_present(&pci_bus_type))
+ pf->flags |= I40E_FLAG_RX_PS_ENABLED;
+ else
+ pf->flags |= I40E_FLAG_RX_1BUF_ENABLED;
/* Set default ITR */
pf->rx_itr_default = I40E_ITR_DYNAMIC | I40E_ITR_RX_DEF;
if (pf->hw.func_caps.npar_enable || pf->hw.func_caps.mfp_mode_1) {
pf->flags |= I40E_FLAG_MFP_ENABLED;
dev_info(&pf->pdev->dev, "MFP mode Enabled\n");
+ if (i40e_get_npar_bw_setting(pf))
+ dev_warn(&pf->pdev->dev,
+ "Could not get NPAR bw settings\n");
+ else
+ dev_info(&pf->pdev->dev,
+ "Min BW = %8.8x, Max BW = %8.8x\n",
+ pf->npar_min_bw, pf->npar_max_bw);
}
/* FW/NVM is not yet fixed in this regard */
return err;
}
-static const struct net_device_ops i40e_netdev_ops = {
+#ifdef HAVE_BRIDGE_ATTRIBS
+/**
+ * i40e_ndo_bridge_setlink - Set the hardware bridge mode
+ * @dev: the netdev being configured
+ * @nlh: RTNL message
+ *
+ * Inserts a new hardware bridge if not already created and
+ * enables the bridging mode requested (VEB or VEPA). If the
+ * hardware bridge has already been inserted and the request
+ * is to change the mode then that requires a PF reset to
+ * allow rebuild of the components with required hardware
+ * bridge mode enabled.
+ **/
+static int i40e_ndo_bridge_setlink(struct net_device *dev,
+ struct nlmsghdr *nlh)
+{
+ struct i40e_netdev_priv *np = netdev_priv(dev);
+ struct i40e_vsi *vsi = np->vsi;
+ struct i40e_pf *pf = vsi->back;
+ struct i40e_veb *veb = NULL;
+ struct nlattr *attr, *br_spec;
+ int i, rem;
+
+ /* Only for PF VSI for now */
+ if (vsi->seid != pf->vsi[pf->lan_vsi]->seid)
+ return -EOPNOTSUPP;
+
+ /* Find the HW bridge for PF VSI */
+ for (i = 0; i < I40E_MAX_VEB && !veb; i++) {
+ if (pf->veb[i] && pf->veb[i]->seid == vsi->uplink_seid)
+ veb = pf->veb[i];
+ }
+
+ br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC);
+
+ nla_for_each_nested(attr, br_spec, rem) {
+ __u16 mode;
+
+ if (nla_type(attr) != IFLA_BRIDGE_MODE)
+ continue;
+
+ mode = nla_get_u16(attr);
+ if ((mode != BRIDGE_MODE_VEPA) &&
+ (mode != BRIDGE_MODE_VEB))
+ return -EINVAL;
+
+ /* Insert a new HW bridge */
+ if (!veb) {
+ veb = i40e_veb_setup(pf, 0, vsi->uplink_seid, vsi->seid,
+ vsi->tc_config.enabled_tc);
+ if (veb) {
+ veb->bridge_mode = mode;
+ i40e_config_bridge_mode(veb);
+ } else {
+ /* No Bridge HW offload available */
+ return -ENOENT;
+ }
+ break;
+ } else if (mode != veb->bridge_mode) {
+ /* Existing HW bridge but different mode needs reset */
+ veb->bridge_mode = mode;
+ i40e_do_reset(pf, (1 << __I40E_PF_RESET_REQUESTED));
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * i40e_ndo_bridge_getlink - Get the hardware bridge mode
+ * @skb: skb buff
+ * @pid: process id
+ * @seq: RTNL message seq #
+ * @dev: the netdev being configured
+ * @filter_mask: unused
+ *
+ * Return the mode in which the hardware bridge is operating in
+ * i.e VEB or VEPA.
+ **/
+#ifdef HAVE_BRIDGE_FILTER
+static int i40e_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
+ struct net_device *dev,
+ u32 __always_unused filter_mask)
+#else
+static int i40e_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
+ struct net_device *dev)
+#endif /* HAVE_BRIDGE_FILTER */
+{
+ struct i40e_netdev_priv *np = netdev_priv(dev);
+ struct i40e_vsi *vsi = np->vsi;
+ struct i40e_pf *pf = vsi->back;
+ struct i40e_veb *veb = NULL;
+ int i;
+
+ /* Only for PF VSI for now */
+ if (vsi->seid != pf->vsi[pf->lan_vsi]->seid)
+ return -EOPNOTSUPP;
+
+ /* Find the HW bridge for the PF VSI */
+ for (i = 0; i < I40E_MAX_VEB && !veb; i++) {
+ if (pf->veb[i] && pf->veb[i]->seid == vsi->uplink_seid)
+ veb = pf->veb[i];
+ }
+
+ if (!veb)
+ return 0;
+
+ return ndo_dflt_bridge_getlink(skb, pid, seq, dev, veb->bridge_mode);
+}
+#endif /* HAVE_BRIDGE_ATTRIBS */
+
+const struct net_device_ops i40e_netdev_ops = {
.ndo_open = i40e_open,
.ndo_stop = i40e_close,
.ndo_start_xmit = i40e_lan_xmit_frame,
#endif
.ndo_get_phys_port_id = i40e_get_phys_port_id,
.ndo_fdb_add = i40e_ndo_fdb_add,
+#ifdef HAVE_BRIDGE_ATTRIBS
+ .ndo_bridge_getlink = i40e_ndo_bridge_getlink,
+ .ndo_bridge_setlink = i40e_ndo_bridge_setlink,
+#endif /* HAVE_BRIDGE_ATTRIBS */
};
/**
i40e_aq_delete_element(&vsi->back->hw, vsi->seid, NULL);
}
+/**
+ * i40e_is_vsi_uplink_mode_veb - Check if the VSI's uplink bridge mode is VEB
+ * @vsi: the VSI being queried
+ *
+ * Returns 1 if HW bridge mode is VEB and return 0 in case of VEPA mode
+ **/
+int i40e_is_vsi_uplink_mode_veb(struct i40e_vsi *vsi)
+{
+ struct i40e_veb *veb;
+ struct i40e_pf *pf = vsi->back;
+
+ /* Uplink is not a bridge so default to VEB */
+ if (vsi->veb_idx == I40E_NO_VEB)
+ return 1;
+
+ veb = pf->veb[vsi->veb_idx];
+ /* Uplink is a bridge in VEPA mode */
+ if (veb && (veb->bridge_mode & BRIDGE_MODE_VEPA))
+ return 0;
+
+ /* Uplink is a bridge in VEB mode */
+ return 1;
+}
+
/**
* i40e_add_vsi - Add a VSI to the switch
* @vsi: the VSI being configured
ctxt.uplink_seid = vsi->uplink_seid;
ctxt.connection_type = I40E_AQ_VSI_CONN_TYPE_NORMAL;
ctxt.flags = I40E_AQ_VSI_TYPE_PF;
- ctxt.info.valid_sections |=
+ if (i40e_is_vsi_uplink_mode_veb(vsi)) {
+ ctxt.info.valid_sections |=
cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
- ctxt.info.switch_id =
+ ctxt.info.switch_id =
cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
+ }
i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
break;
ctxt.connection_type = I40E_AQ_VSI_CONN_TYPE_NORMAL;
ctxt.flags = I40E_AQ_VSI_TYPE_VMDQ2;
- ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
-
/* This VSI is connected to VEB so the switch_id
* should be set to zero by default.
*/
- ctxt.info.switch_id = 0;
- ctxt.info.switch_id |= cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
+ if (i40e_is_vsi_uplink_mode_veb(vsi)) {
+ ctxt.info.valid_sections |=
+ cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
+ ctxt.info.switch_id =
+ cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
+ }
/* Setup the VSI tx/rx queue map for TC0 only for now */
i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
ctxt.connection_type = I40E_AQ_VSI_CONN_TYPE_NORMAL;
ctxt.flags = I40E_AQ_VSI_TYPE_VF;
- ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
-
/* This VSI is connected to VEB so the switch_id
* should be set to zero by default.
*/
- ctxt.info.switch_id = cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
+ if (i40e_is_vsi_uplink_mode_veb(vsi)) {
+ ctxt.info.valid_sections |=
+ cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
+ ctxt.info.switch_id =
+ cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
+ }
ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
ctxt.info.port_vlan_flags |= I40E_AQ_VSI_PVLAN_MODE_ALL;
__func__);
return NULL;
}
- i40e_enable_pf_switch_lb(pf);
+ i40e_config_bridge_mode(veb);
}
for (i = 0; i < I40E_MAX_VEB && !veb; i++) {
if (pf->veb[i] && pf->veb[i]->seid == vsi->uplink_seid)
#ifdef CONFIG_PCI_IOV
buf += sprintf(buf, "VFs: %d ", pf->num_req_vfs);
#endif
- buf += sprintf(buf, "VSIs: %d QP: %d ", pf->hw.func_caps.num_vsis,
- pf->vsi[pf->lan_vsi]->num_queue_pairs);
+ buf += sprintf(buf, "VSIs: %d QP: %d RX: %s ",
+ pf->hw.func_caps.num_vsis,
+ pf->vsi[pf->lan_vsi]->num_queue_pairs,
+ pf->flags & I40E_FLAG_RX_PS_ENABLED ? "PS" : "1BUF");
if (pf->flags & I40E_FLAG_RSS_ENABLED)
buf += sprintf(buf, "RSS ");
pr_info("%s: %s - version %s\n", i40e_driver_name,
i40e_driver_string, i40e_driver_version_str);
pr_info("%s: %s\n", i40e_driver_name, i40e_copyright);
+
+#if IS_ENABLED(CONFIG_I40E_CONFIGFS_FS)
+ i40e_configfs_init();
+#endif /* CONFIG_I40E_CONFIGFS_FS */
i40e_dbg_init();
return pci_register_driver(&i40e_driver);
}
{
pci_unregister_driver(&i40e_driver);
i40e_dbg_exit();
+#if IS_ENABLED(CONFIG_I40E_CONFIGFS_FS)
+ i40e_configfs_exit();
+#endif /* CONFIG_I40E_CONFIGFS_FS */
}
module_exit(i40e_exit_module);