#include <linux/string.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
#define AT803X_INTR_ENABLE 0x12
#define AT803X_INTR_STATUS 0x13
+#define AT803X_SMART_SPEED 0x14
+#define AT803X_LED_CONTROL 0x18
#define AT803X_WOL_ENABLE 0x01
#define AT803X_DEVICE_ADDR 0x03
#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
#define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05
#define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8)
+#define ATH8030_PHY_ID 0x004dd076
+#define ATH8031_PHY_ID 0x004dd074
+#define ATH8035_PHY_ID 0x004dd072
+
MODULE_DESCRIPTION("Atheros 803x PHY driver");
MODULE_AUTHOR("Matus Ujhelyi");
MODULE_LICENSE("GPL");
+struct at803x_priv {
+ bool phy_reset:1;
+ struct gpio_desc *gpiod_reset;
+};
+
+struct at803x_context {
+ u16 bmcr;
+ u16 advertise;
+ u16 control1000;
+ u16 int_enable;
+ u16 smart_speed;
+ u16 led_control;
+};
+
+/* save relevant PHY registers to private copy */
+static void at803x_context_save(struct phy_device *phydev,
+ struct at803x_context *context)
+{
+ context->bmcr = phy_read(phydev, MII_BMCR);
+ context->advertise = phy_read(phydev, MII_ADVERTISE);
+ context->control1000 = phy_read(phydev, MII_CTRL1000);
+ context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE);
+ context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED);
+ context->led_control = phy_read(phydev, AT803X_LED_CONTROL);
+}
+
+/* restore relevant PHY registers from private copy */
+static void at803x_context_restore(struct phy_device *phydev,
+ const struct at803x_context *context)
+{
+ phy_write(phydev, MII_BMCR, context->bmcr);
+ phy_write(phydev, MII_ADVERTISE, context->advertise);
+ phy_write(phydev, MII_CTRL1000, context->control1000);
+ phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable);
+ phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed);
+ phy_write(phydev, AT803X_LED_CONTROL, context->led_control);
+}
+
static int at803x_set_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
return 0;
}
+static int at803x_probe(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->dev;
+ struct at803x_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->gpiod_reset = devm_gpiod_get(dev, "reset");
+ if (IS_ERR(priv->gpiod_reset))
+ priv->gpiod_reset = NULL;
+ else
+ gpiod_direction_output(priv->gpiod_reset, 1);
+
+ phydev->priv = priv;
+
+ return 0;
+}
+
static int at803x_config_init(struct phy_device *phydev)
{
int ret;
return err;
}
+static void at803x_link_change_notify(struct phy_device *phydev)
+{
+ struct at803x_priv *priv = phydev->priv;
+
+ /*
+ * Conduct a hardware reset for AT8030 every time a link loss is
+ * signalled. This is necessary to circumvent a hardware bug that
+ * occurs when the cable is unplugged while TX packets are pending
+ * in the FIFO. In such cases, the FIFO enters an error mode it
+ * cannot recover from by software.
+ */
+ if (phydev->drv->phy_id == ATH8030_PHY_ID) {
+ if (phydev->state == PHY_NOLINK) {
+ if (priv->gpiod_reset && !priv->phy_reset) {
+ struct at803x_context context;
+
+ at803x_context_save(phydev, &context);
+
+ gpiod_set_value(priv->gpiod_reset, 0);
+ msleep(1);
+ gpiod_set_value(priv->gpiod_reset, 1);
+ msleep(1);
+
+ at803x_context_restore(phydev, &context);
+
+ dev_dbg(&phydev->dev, "%s(): phy was reset\n",
+ __func__);
+ priv->phy_reset = true;
+ }
+ } else {
+ priv->phy_reset = false;
+ }
+ }
+}
+
static struct phy_driver at803x_driver[] = {
{
/* ATHEROS 8035 */
- .phy_id = 0x004dd072,
- .name = "Atheros 8035 ethernet",
- .phy_id_mask = 0xffffffef,
- .config_init = at803x_config_init,
- .set_wol = at803x_set_wol,
- .get_wol = at803x_get_wol,
- .suspend = at803x_suspend,
- .resume = at803x_resume,
- .features = PHY_GBIT_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .driver = {
+ .phy_id = ATH8035_PHY_ID,
+ .name = "Atheros 8035 ethernet",
+ .phy_id_mask = 0xffffffef,
+ .probe = at803x_probe,
+ .config_init = at803x_config_init,
+ .link_change_notify = at803x_link_change_notify,
+ .set_wol = at803x_set_wol,
+ .get_wol = at803x_get_wol,
+ .suspend = at803x_suspend,
+ .resume = at803x_resume,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = {
.owner = THIS_MODULE,
},
}, {
/* ATHEROS 8030 */
- .phy_id = 0x004dd076,
- .name = "Atheros 8030 ethernet",
- .phy_id_mask = 0xffffffef,
- .config_init = at803x_config_init,
- .set_wol = at803x_set_wol,
- .get_wol = at803x_get_wol,
- .suspend = at803x_suspend,
- .resume = at803x_resume,
- .features = PHY_GBIT_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .driver = {
+ .phy_id = ATH8030_PHY_ID,
+ .name = "Atheros 8030 ethernet",
+ .phy_id_mask = 0xffffffef,
+ .probe = at803x_probe,
+ .config_init = at803x_config_init,
+ .link_change_notify = at803x_link_change_notify,
+ .set_wol = at803x_set_wol,
+ .get_wol = at803x_get_wol,
+ .suspend = at803x_suspend,
+ .resume = at803x_resume,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = {
.owner = THIS_MODULE,
},
}, {
/* ATHEROS 8031 */
- .phy_id = 0x004dd074,
- .name = "Atheros 8031 ethernet",
- .phy_id_mask = 0xffffffef,
- .config_init = at803x_config_init,
- .set_wol = at803x_set_wol,
- .get_wol = at803x_get_wol,
- .suspend = at803x_suspend,
- .resume = at803x_resume,
- .features = PHY_GBIT_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .ack_interrupt = &at803x_ack_interrupt,
- .config_intr = &at803x_config_intr,
- .driver = {
+ .phy_id = ATH8031_PHY_ID,
+ .name = "Atheros 8031 ethernet",
+ .phy_id_mask = 0xffffffef,
+ .probe = at803x_probe,
+ .config_init = at803x_config_init,
+ .link_change_notify = at803x_link_change_notify,
+ .set_wol = at803x_set_wol,
+ .get_wol = at803x_get_wol,
+ .suspend = at803x_suspend,
+ .resume = at803x_resume,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = &at803x_ack_interrupt,
+ .config_intr = &at803x_config_intr,
+ .driver = {
.owner = THIS_MODULE,
},
} };
module_exit(atheros_exit);
static struct mdio_device_id __maybe_unused atheros_tbl[] = {
- { 0x004dd076, 0xffffffef },
- { 0x004dd074, 0xffffffef },
- { 0x004dd072, 0xffffffef },
+ { ATH8030_PHY_ID, 0xffffffef },
+ { ATH8031_PHY_ID, 0xffffffef },
+ { ATH8035_PHY_ID, 0xffffffef },
{ }
};
projects / cascardo / linux.git / blobdiff