*/
#define DRV_NAME "winbond-840"
-#define DRV_VERSION "1.01-d"
-#define DRV_RELDATE "Nov-17-2001"
+#define DRV_VERSION "1.01-e"
+#define DRV_RELDATE "Sep-11-2006"
/* Automatically extracted configuration info:
Making the Tx ring too large decreases the effectiveness of channel
bonding and packet priority.
There are no ill effects from too-large receive rings. */
-#define TX_RING_SIZE 16
#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */
#define TX_QUEUE_LEN_RESTART 5
-#define RX_RING_SIZE 32
#define TX_BUFLIMIT (1024-128)
#include <asm/io.h>
#include <asm/irq.h>
+#include "tulip.h"
+
/* These identify the driver base version and may not be removed. */
static char version[] =
KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) " DRV_RELDATE " Donald Becker <becker@scyld.com>\n"
};
/* This driver was written to use PCI memory space, however some x86 systems
- work only with I/O space accesses. Pass -DUSE_IO_OPS to use PCI I/O space
- accesses instead of memory space. */
+ work only with I/O space accesses. See CONFIG_TULIP_MMIO in .config
+*/
/* Offsets to the Command and Status Registers, "CSRs".
While similar to the Tulip, these registers are longword aligned.
CurTxDescAddr=0x4C, CurTxBufAddr=0x50,
};
-/* Bits in the interrupt status/enable registers. */
-/* The bits in the Intr Status/Enable registers, mostly interrupt sources. */
-enum intr_status_bits {
- NormalIntr=0x10000, AbnormalIntr=0x8000,
- IntrPCIErr=0x2000, TimerInt=0x800,
- IntrRxDied=0x100, RxNoBuf=0x80, IntrRxDone=0x40,
- TxFIFOUnderflow=0x20, RxErrIntr=0x10,
- TxIdle=0x04, IntrTxStopped=0x02, IntrTxDone=0x01,
-};
-
/* Bits in the NetworkConfig register. */
enum rx_mode_bits {
- AcceptErr=0x80, AcceptRunt=0x40,
- AcceptBroadcast=0x20, AcceptMulticast=0x10,
- AcceptAllPhys=0x08, AcceptMyPhys=0x02,
+ AcceptErr=0x80,
+ RxAcceptBroadcast=0x20, AcceptMulticast=0x10,
+ RxAcceptAllPhys=0x08, AcceptMyPhys=0x02,
};
enum mii_reg_bits {
u32 buffer1, buffer2;
};
-/* Bits in network_desc.status */
-enum desc_status_bits {
- DescOwn=0x80000000, DescEndRing=0x02000000, DescUseLink=0x01000000,
- DescWholePkt=0x60000000, DescStartPkt=0x20000000, DescEndPkt=0x40000000,
- DescIntr=0x80000000,
-};
-
#define MII_CNT 1 /* winbond only supports one MII */
struct netdev_private {
struct w840_rx_desc *rx_ring;
static void set_rx_mode(struct net_device *dev);
static struct net_device_stats *get_stats(struct net_device *dev);
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static struct ethtool_ops netdev_ethtool_ops;
+static const struct ethtool_ops netdev_ethtool_ops;
static int netdev_close(struct net_device *dev);
int irq;
int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0;
void __iomem *ioaddr;
- int bar = 1;
i = pci_enable_device(pdev);
if (i) return i;
if (pci_request_regions(pdev, DRV_NAME))
goto err_out_netdev;
-#ifdef USE_IO_OPS
- bar = 0;
-#endif
- ioaddr = pci_iomap(pdev, bar, netdev_res_size);
+
+ ioaddr = pci_iomap(pdev, TULIP_BAR, netdev_res_size);
if (!ioaddr)
goto err_out_free_res;
np->rx_buf_sz,PCI_DMA_FROMDEVICE);
np->rx_ring[i].buffer1 = np->rx_addr[i];
- np->rx_ring[i].status = DescOwn;
+ np->rx_ring[i].status = DescOwned;
}
np->cur_rx = 0;
}
#elif defined(__powerpc__) || defined(__i386__) || defined(__alpha__) || defined(__ia64__) || defined(__x86_64__)
i |= 0xE000;
-#elif defined(__sparc__)
+#elif defined(__sparc__) || defined (CONFIG_PARISC)
i |= 0x4800;
#else
#warning Processor architecture undefined
/* Now acquire the irq spinlock.
* The difficult race is the the ordering between
- * increasing np->cur_tx and setting DescOwn:
+ * increasing np->cur_tx and setting DescOwned:
* - if np->cur_tx is increased first the interrupt
* handler could consider the packet as transmitted
- * since DescOwn is cleared.
- * - If DescOwn is set first the NIC could report the
+ * since DescOwned is cleared.
+ * - If DescOwned is set first the NIC could report the
* packet as sent, but the interrupt handler would ignore it
* since the np->cur_tx was not yet increased.
*/
np->cur_tx++;
wmb(); /* flush length, buffer1, buffer2 */
- np->tx_ring[entry].status = DescOwn;
+ np->tx_ring[entry].status = DescOwned;
wmb(); /* flush status and kick the hardware */
iowrite32(0, np->base_addr + TxStartDemand);
np->tx_q_bytes += skb->len;
handled = 1;
- if (intr_status & (IntrRxDone | RxNoBuf))
+ if (intr_status & (RxIntr | RxNoBuf))
netdev_rx(dev);
if (intr_status & RxNoBuf)
iowrite32(0, ioaddr + RxStartDemand);
- if (intr_status & (TxIdle | IntrTxDone) &&
+ if (intr_status & (TxNoBuf | TxIntr) &&
np->cur_tx != np->dirty_tx) {
spin_lock(&np->lock);
netdev_tx_done(dev);
}
/* Abnormal error summary/uncommon events handlers. */
- if (intr_status & (AbnormalIntr | TxFIFOUnderflow | IntrPCIErr |
- TimerInt | IntrTxStopped))
+ if (intr_status & (AbnormalIntr | TxFIFOUnderflow | SytemError |
+ TimerInt | TxDied))
netdev_error(dev, intr_status);
if (--work_limit < 0) {
np->rx_ring[entry].buffer1 = np->rx_addr[entry];
}
wmb();
- np->rx_ring[entry].status = DescOwn;
+ np->rx_ring[entry].status = DescOwned;
}
return 0;
dev->name, new);
update_csr6(dev, new);
}
- if (intr_status & IntrRxDied) { /* Missed a Rx frame. */
+ if (intr_status & RxDied) { /* Missed a Rx frame. */
np->stats.rx_errors++;
}
if (intr_status & TimerInt) {
u32 rx_mode;
if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
- /* Unconditionally log net taps. */
- printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name);
memset(mc_filter, 0xff, sizeof(mc_filter));
- rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAllPhys
+ rx_mode = RxAcceptBroadcast | AcceptMulticast | RxAcceptAllPhys
| AcceptMyPhys;
} else if ((dev->mc_count > multicast_filter_limit)
|| (dev->flags & IFF_ALLMULTI)) {
/* Too many to match, or accept all multicasts. */
memset(mc_filter, 0xff, sizeof(mc_filter));
- rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys;
} else {
struct dev_mc_list *mclist;
int i;
filterbit &= 0x3f;
mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
}
- rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys;
}
iowrite32(mc_filter[0], ioaddr + MulticastFilter0);
iowrite32(mc_filter[1], ioaddr + MulticastFilter1);
debug = value;
}
-static struct ethtool_ops netdev_ethtool_ops = {
+static const struct ethtool_ops netdev_ethtool_ops = {
.get_drvinfo = netdev_get_drvinfo,
.get_settings = netdev_get_settings,
.set_settings = netdev_set_settings,
synchronize_irq(dev->irq);
netif_tx_disable(dev);
-
+
np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
/* no more hardware accesses behind this line. */
{
struct net_device *dev = pci_get_drvdata (pdev);
struct netdev_private *np = netdev_priv(dev);
+ int retval = 0;
rtnl_lock();
if (netif_device_present(dev))
goto out; /* device not suspended */
if (netif_running(dev)) {
- pci_enable_device(pdev);
- /* pci_power_on(pdev); */
-
+ if ((retval = pci_enable_device(pdev))) {
+ printk (KERN_ERR
+ "%s: pci_enable_device failed in resume\n",
+ dev->name);
+ goto out;
+ }
spin_lock_irq(&np->lock);
iowrite32(1, np->base_addr+PCIBusCfg);
ioread32(np->base_addr+PCIBusCfg);
}
out:
rtnl_unlock();
- return 0;
+ return retval;
}
#endif
static int __init w840_init(void)
{
printk(version);
- return pci_module_init(&w840_driver);
+ return pci_register_driver(&w840_driver);
}
static void __exit w840_exit(void)