ath10k: don't enable interrupts for the diagnostic window

[cascardo/linux.git] / drivers / net / wireless / iwlwifi / Kconfig

diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 7fd5042..6451d2b 100644 (file)
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -20,16 +20,17 @@ config IWLWIFI
                Intel 2000 Series Wi-Fi Adapters
                Intel 7260 Wi-Fi Adapter
                Intel 3160 Wi-Fi Adapter
+               Intel 7265 Wi-Fi Adapter
 
 
          This driver uses the kernel's mac80211 subsystem.
 
-         In order to use this driver, you will need a microcode (uCode)
+         In order to use this driver, you will need a firmware
          image for it. You can obtain the microcode from:
 
-                 <http://intellinuxwireless.org/>.
+                 <http://wireless.kernel.org/en/users/Drivers/iwlwifi>.
 
-         The microcode is typically installed in /lib/firmware. You can
+         The firmware is typically installed in /lib/firmware. You can
          look in the hotplug script /etc/hotplug/firmware.agent to
          determine which directory FIRMWARE_DIR is set to when the script
          runs.
@@ -39,9 +40,10 @@ config IWLWIFI
          say M here and read <file:Documentation/kbuild/modules.txt>.  The
          module will be called iwlwifi.
 
+if IWLWIFI
+
 config IWLWIFI_LEDS
        bool
-       depends on IWLWIFI
        depends on LEDS_CLASS=y || LEDS_CLASS=IWLWIFI
        select LEDS_TRIGGERS
        select MAC80211_LEDS
@@ -49,7 +51,7 @@ config IWLWIFI_LEDS
 
 config IWLDVM
        tristate "Intel Wireless WiFi DVM Firmware support"
-       depends on IWLWIFI
+       depends on m
        default IWLWIFI
        help
          This is the driver that supports the DVM firmware which is
@@ -58,7 +60,7 @@ config IWLDVM
 
 config IWLMVM
        tristate "Intel Wireless WiFi MVM Firmware support"
-       depends on IWLWIFI
+       depends on m
        help
          This is the driver that supports the MVM firmware which is
          currently only available for 7260 and 3160 devices.
@@ -70,7 +72,7 @@ config IWLWIFI_OPMODE_MODULAR
        default y if IWLMVM=m
 
 comment "WARNING: iwlwifi is useless without IWLDVM or IWLMVM"
-       depends on IWLWIFI && IWLDVM=n && IWLMVM=n
+       depends on IWLDVM=n && IWLMVM=n
 
 config IWLWIFI_BCAST_FILTERING
        bool "Enable broadcast filtering"
@@ -86,11 +88,9 @@ config IWLWIFI_BCAST_FILTERING
          expect incoming broadcasts for their normal operations.
 
 menu "Debugging Options"
-       depends on IWLWIFI
 
 config IWLWIFI_DEBUG
        bool "Enable full debugging output in the iwlwifi driver"
-       depends on IWLWIFI
        ---help---
          This option will enable debug tracing output for the iwlwifi drivers
 
@@ -115,7 +115,7 @@ config IWLWIFI_DEBUG
 
 config IWLWIFI_DEBUGFS
         bool "iwlwifi debugfs support"
-        depends on IWLWIFI && MAC80211_DEBUGFS
+        depends on MAC80211_DEBUGFS
         ---help---
          Enable creation of debugfs files for the iwlwifi drivers. This
          is a low-impact option that allows getting insight into the
@@ -123,13 +123,12 @@ config IWLWIFI_DEBUGFS
 
 config IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
         bool "Experimental uCode support"
-        depends on IWLWIFI && IWLWIFI_DEBUG
+        depends on IWLWIFI_DEBUG
         ---help---
          Enable use of experimental ucode for testing and debugging.
 
 config IWLWIFI_DEVICE_TRACING
        bool "iwlwifi device access tracing"
-       depends on IWLWIFI
        depends on EVENT_TRACING
        help
          Say Y here to trace all commands, including TX frames and IO
@@ -145,3 +144,5 @@ config IWLWIFI_DEVICE_TRACING
          If unsure, say Y so we can help you better when problems
          occur.
 endmenu
+
+endif