* RF3320 2.4G 1T1R(RT3350/RT3370/RT3390)
* RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392)
* RF3853 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662)
+ * RF5370 2.4G 1T1R
* RF5390 2.4G 1T1R
*/
#define RF2820 0x0001
#define RF3320 0x000b
#define RF3322 0x000c
#define RF3853 0x000d
+#define RF5370 0x5370
#define RF5390 0x5390
/*
* READ_CONTROL: 0 write BBP, 1 read BBP
* BUSY: ASIC is busy executing BBP commands
* BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
- * BBP_RW_MODE: 0 serial, 1 paralell
+ * BBP_RW_MODE: 0 serial, 1 parallel
*/
#define BBP_CSR_CFG 0x101c
#define BBP_CSR_CFG_VALUE FIELD32(0x000000ff)
#define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff)
#define EEPROM_TXPOWER_BG_2 FIELD16(0xff00)
+/*
+ * EEPROM temperature compensation boundaries 802.11BG
+ * MINUS4: If the actual TSSI is below this boundary, tx power needs to be
+ * reduced by (agc_step * -4)
+ * MINUS3: If the actual TSSI is below this boundary, tx power needs to be
+ * reduced by (agc_step * -3)
+ */
+#define EEPROM_TSSI_BOUND_BG1 0x0037
+#define EEPROM_TSSI_BOUND_BG1_MINUS4 FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_BG1_MINUS3 FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11BG
+ * MINUS2: If the actual TSSI is below this boundary, tx power needs to be
+ * reduced by (agc_step * -2)
+ * MINUS1: If the actual TSSI is below this boundary, tx power needs to be
+ * reduced by (agc_step * -1)
+ */
+#define EEPROM_TSSI_BOUND_BG2 0x0038
+#define EEPROM_TSSI_BOUND_BG2_MINUS2 FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_BG2_MINUS1 FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11BG
+ * REF: Reference TSSI value, no tx power changes needed
+ * PLUS1: If the actual TSSI is above this boundary, tx power needs to be
+ * increased by (agc_step * 1)
+ */
+#define EEPROM_TSSI_BOUND_BG3 0x0039
+#define EEPROM_TSSI_BOUND_BG3_REF FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_BG3_PLUS1 FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11BG
+ * PLUS2: If the actual TSSI is above this boundary, tx power needs to be
+ * increased by (agc_step * 2)
+ * PLUS3: If the actual TSSI is above this boundary, tx power needs to be
+ * increased by (agc_step * 3)
+ */
+#define EEPROM_TSSI_BOUND_BG4 0x003a
+#define EEPROM_TSSI_BOUND_BG4_PLUS2 FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_BG4_PLUS3 FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11BG
+ * PLUS4: If the actual TSSI is above this boundary, tx power needs to be
+ * increased by (agc_step * 4)
+ * AGC_STEP: Temperature compensation step.
+ */
+#define EEPROM_TSSI_BOUND_BG5 0x003b
+#define EEPROM_TSSI_BOUND_BG5_PLUS4 FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_BG5_AGC_STEP FIELD16(0xff00)
+
/*
* EEPROM TXPOWER 802.11A
*/
#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff)
#define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
+/*
+ * EEPROM temperature compensation boundaries 802.11A
+ * MINUS4: If the actual TSSI is below this boundary, tx power needs to be
+ * reduced by (agc_step * -4)
+ * MINUS3: If the actual TSSI is below this boundary, tx power needs to be
+ * reduced by (agc_step * -3)
+ */
+#define EEPROM_TSSI_BOUND_A1 0x006a
+#define EEPROM_TSSI_BOUND_A1_MINUS4 FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_A1_MINUS3 FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11A
+ * MINUS2: If the actual TSSI is below this boundary, tx power needs to be
+ * reduced by (agc_step * -2)
+ * MINUS1: If the actual TSSI is below this boundary, tx power needs to be
+ * reduced by (agc_step * -1)
+ */
+#define EEPROM_TSSI_BOUND_A2 0x006b
+#define EEPROM_TSSI_BOUND_A2_MINUS2 FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_A2_MINUS1 FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11A
+ * REF: Reference TSSI value, no tx power changes needed
+ * PLUS1: If the actual TSSI is above this boundary, tx power needs to be
+ * increased by (agc_step * 1)
+ */
+#define EEPROM_TSSI_BOUND_A3 0x006c
+#define EEPROM_TSSI_BOUND_A3_REF FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_A3_PLUS1 FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11A
+ * PLUS2: If the actual TSSI is above this boundary, tx power needs to be
+ * increased by (agc_step * 2)
+ * PLUS3: If the actual TSSI is above this boundary, tx power needs to be
+ * increased by (agc_step * 3)
+ */
+#define EEPROM_TSSI_BOUND_A4 0x006d
+#define EEPROM_TSSI_BOUND_A4_PLUS2 FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_A4_PLUS3 FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11A
+ * PLUS4: If the actual TSSI is above this boundary, tx power needs to be
+ * increased by (agc_step * 4)
+ * AGC_STEP: Temperature compensation step.
+ */
+#define EEPROM_TSSI_BOUND_A5 0x006e
+#define EEPROM_TSSI_BOUND_A5_PLUS4 FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_A5_AGC_STEP FIELD16(0xff00)
+
/*
* EEPROM TXPOWER by rate: tx power per tx rate for HT20 mode
*/