-menuconfig POWER_SUPPLY
- bool "Power supply class support"
- help
- Say Y here to enable power supply class support. This allows
- power supply (batteries, AC, USB) monitoring by userspace
- via sysfs and uevent (if available) and/or APM kernel interface
- (if selected below).
-
-if POWER_SUPPLY
-
-config POWER_SUPPLY_DEBUG
- bool "Power supply debug"
- help
- Say Y here to enable debugging messages for power supply class
- and drivers.
-
-config PDA_POWER
- tristate "Generic PDA/phone power driver"
- depends on !S390
- help
- Say Y here to enable generic power driver for PDAs and phones with
- one or two external power supplies (AC/USB) connected to main and
- backup batteries, and optional builtin charger.
-
-config APM_POWER
- tristate "APM emulation for class batteries"
- depends on APM_EMULATION
- help
- Say Y here to enable support APM status emulation using
- battery class devices.
-
-config GENERIC_ADC_BATTERY
- tristate "Generic battery support using IIO"
- depends on IIO
- help
- Say Y here to enable support for the generic battery driver
- which uses IIO framework to read adc.
-
-config MAX8925_POWER
- tristate "MAX8925 battery charger support"
- depends on MFD_MAX8925
- help
- Say Y here to enable support for the battery charger in the Maxim
- MAX8925 PMIC.
-
-config WM831X_BACKUP
- tristate "WM831X backup battery charger support"
- depends on MFD_WM831X
- help
- Say Y here to enable support for the backup battery charger
- in the Wolfson Microelectronics WM831x PMICs.
-
-config WM831X_POWER
- tristate "WM831X PMU support"
- depends on MFD_WM831X
- help
- Say Y here to enable support for the power management unit
- provided by Wolfson Microelectronics WM831x PMICs.
-
-config WM8350_POWER
- tristate "WM8350 PMU support"
- depends on MFD_WM8350
- help
- Say Y here to enable support for the power management unit
- provided by the Wolfson Microelectronics WM8350 PMIC.
-
-config TEST_POWER
- tristate "Test power driver"
- help
- This driver is used for testing. It's safe to say M here.
-
-config BATTERY_88PM860X
- tristate "Marvell 88PM860x battery driver"
- depends on MFD_88PM860X
- help
- Say Y here to enable battery monitor for Marvell 88PM860x chip.
-
-config BATTERY_ACT8945A
- tristate "Active-semi ACT8945A charger driver"
- depends on MFD_ACT8945A || COMPILE_TEST
- help
- Say Y here to enable support for power supply provided by
- Active-semi ActivePath ACT8945A charger.
-
-config BATTERY_DS2760
- tristate "DS2760 battery driver (HP iPAQ & others)"
- depends on W1 && W1_SLAVE_DS2760
- help
- Say Y here to enable support for batteries with ds2760 chip.
-
-config BATTERY_DS2780
- tristate "DS2780 battery driver"
- depends on HAS_IOMEM
- select W1
- select W1_SLAVE_DS2780
- help
- Say Y here to enable support for batteries with ds2780 chip.
-
-config BATTERY_DS2781
- tristate "DS2781 battery driver"
- depends on HAS_IOMEM
- select W1
- select W1_SLAVE_DS2781
- help
- If you enable this you will have the DS2781 battery driver support.
-
- The battery monitor chip is used in many batteries/devices
- as the one who is responsible for charging/discharging/monitoring
- Li+ batteries.
-
- If you are unsure, say N.
-
-config BATTERY_DS2782
- tristate "DS2782/DS2786 standalone gas-gauge"
- depends on I2C
- help
- Say Y here to enable support for the DS2782/DS2786 standalone battery
- gas-gauge.
-
-config BATTERY_PMU
- tristate "Apple PMU battery"
- depends on PPC32 && ADB_PMU
- help
- Say Y here to expose battery information on Apple machines
- through the generic battery class.
-
-config BATTERY_OLPC
- tristate "One Laptop Per Child battery"
- depends on X86_32 && OLPC
- help
- Say Y to enable support for the battery on the OLPC laptop.
-
-config BATTERY_TOSA
- tristate "Sharp SL-6000 (tosa) battery"
- depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
- help
- Say Y to enable support for the battery on the Sharp Zaurus
- SL-6000 (tosa) models.
-
-config BATTERY_COLLIE
- tristate "Sharp SL-5500 (collie) battery"
- depends on SA1100_COLLIE && MCP_UCB1200
- help
- Say Y to enable support for the battery on the Sharp Zaurus
- SL-5500 (collie) models.
-
-config BATTERY_IPAQ_MICRO
- tristate "iPAQ Atmel Micro ASIC battery driver"
- depends on MFD_IPAQ_MICRO
- help
- Choose this option if you want to monitor battery status on
- Compaq/HP iPAQ h3100 and h3600.
-
-config BATTERY_WM97XX
- bool "WM97xx generic battery driver"
- depends on TOUCHSCREEN_WM97XX=y
- help
- Say Y to enable support for battery measured by WM97xx aux port.
-
-config BATTERY_SBS
- tristate "SBS Compliant gas gauge"
- depends on I2C
- help
- Say Y to include support for SBS battery driver for SBS-compliant
- gas gauges.
-
-config BATTERY_BQ27XXX
- tristate "BQ27xxx battery driver"
- help
- Say Y here to enable support for batteries with BQ27xxx chips.
-
-config BATTERY_BQ27XXX_I2C
- tristate "BQ27xxx I2C support"
- depends on BATTERY_BQ27XXX
- depends on I2C
- default y
- help
- Say Y here to enable support for batteries with BQ27xxx chips
- connected over an I2C bus.
-
-config BATTERY_DA9030
- tristate "DA9030 battery driver"
- depends on PMIC_DA903X
- help
- Say Y here to enable support for batteries charger integrated into
- DA9030 PMIC.
-
-config BATTERY_DA9052
- tristate "Dialog DA9052 Battery"
- depends on PMIC_DA9052
- help
- Say Y here to enable support for batteries charger integrated into
- DA9052 PMIC.
-
-config CHARGER_DA9150
- tristate "Dialog Semiconductor DA9150 Charger support"
- depends on MFD_DA9150
- depends on DA9150_GPADC
- depends on IIO
- help
- Say Y here to enable support for charger unit of the DA9150
- Integrated Charger & Fuel-Gauge IC.
-
- This driver can also be built as a module. If so, the module will be
- called da9150-charger.
-
-config BATTERY_DA9150
- tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
- depends on MFD_DA9150
- help
- Say Y here to enable support for the Fuel-Gauge unit of the DA9150
- Integrated Charger & Fuel-Gauge IC
-
- This driver can also be built as a module. If so, the module will be
- called da9150-fg.
-
-config AXP288_CHARGER
- tristate "X-Powers AXP288 Charger"
- depends on MFD_AXP20X && EXTCON_AXP288
- help
- Say yes here to have support X-Power AXP288 power management IC (PMIC)
- integrated charger.
-
-config AXP288_FUEL_GAUGE
- tristate "X-Powers AXP288 Fuel Gauge"
- depends on MFD_AXP20X && IIO
- help
- Say yes here to have support for X-Power power management IC (PMIC)
- Fuel Gauge. The device provides battery statistics and status
- monitoring as well as alerts for battery over/under voltage and
- over/under temperature.
-
-config BATTERY_MAX17040
- tristate "Maxim MAX17040 Fuel Gauge"
- depends on I2C
- help
- MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
- in handheld and portable equipment. The MAX17040 is configured
- to operate with a single lithium cell
-
-config BATTERY_MAX17042
- tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
- depends on I2C
- select REGMAP_I2C
- help
- MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
- in handheld and portable equipment. The MAX17042 is configured
- to operate with a single lithium cell. MAX8997 and MAX8966 are
- multi-function devices that include fuel gauages that are compatible
- with MAX17042. This driver also supports max17047/50 chips which are
- improved version of max17042.
-
-config BATTERY_Z2
- tristate "Z2 battery driver"
- depends on I2C && MACH_ZIPIT2
- help
- Say Y to include support for the battery on the Zipit Z2.
-
-config BATTERY_S3C_ADC
- tristate "Battery driver for Samsung ADC based monitoring"
- depends on S3C_ADC
- help
- Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
-
-config BATTERY_TWL4030_MADC
- tristate "TWL4030 MADC battery driver"
- depends on TWL4030_MADC
- help
- Say Y here to enable this dumb driver for batteries managed
- through the TWL4030 MADC.
-
-config CHARGER_88PM860X
- tristate "Marvell 88PM860x Charger driver"
- depends on MFD_88PM860X && BATTERY_88PM860X
- help
- Say Y here to enable charger for Marvell 88PM860x chip.
-
-config CHARGER_PCF50633
- tristate "NXP PCF50633 MBC"
- depends on MFD_PCF50633
- help
- Say Y to include support for NXP PCF50633 Main Battery Charger.
-
-config BATTERY_JZ4740
- tristate "Ingenic JZ4740 battery"
- depends on MACH_JZ4740
- depends on MFD_JZ4740_ADC
- help
- Say Y to enable support for the battery on Ingenic JZ4740 based
- boards.
-
- This driver can be build as a module. If so, the module will be
- called jz4740-battery.
-
-config BATTERY_INTEL_MID
- tristate "Battery driver for Intel MID platforms"
- depends on INTEL_SCU_IPC && SPI
- help
- Say Y here to enable the battery driver on Intel MID
- platforms.
-
-config BATTERY_RX51
- tristate "Nokia RX-51 (N900) battery driver"
- depends on TWL4030_MADC
- help
- Say Y here to enable support for battery information on Nokia
- RX-51, also known as N900 tablet.
-
-config CHARGER_ISP1704
- tristate "ISP1704 USB Charger Detection"
- depends on USB_PHY
- depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
- help
- Say Y to enable support for USB Charger Detection with
- ISP1707/ISP1704 USB transceivers.
-
-config CHARGER_MAX8903
- tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
- help
- Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
- The driver supports controlling charger-enable and current-limit
- pins based on the status of charger connections with interrupt
- handlers.
-
-config CHARGER_TWL4030
- tristate "OMAP TWL4030 BCI charger driver"
- depends on IIO && TWL4030_CORE
- help
- Say Y here to enable support for TWL4030 Battery Charge Interface.
-
-config CHARGER_LP8727
- tristate "TI/National Semiconductor LP8727 charger driver"
- depends on I2C
- help
- Say Y here to enable support for LP8727 Charger Driver.
-
-config CHARGER_LP8788
- tristate "TI LP8788 charger driver"
- depends on MFD_LP8788
- depends on LP8788_ADC
- depends on IIO
- help
- Say Y to enable support for the LP8788 linear charger.
-
-config CHARGER_GPIO
- tristate "GPIO charger"
- depends on GPIOLIB || COMPILE_TEST
- help
- Say Y to include support for chargers which report their online status
- through a GPIO pin.
-
- This driver can be build as a module. If so, the module will be
- called gpio-charger.
-
-config CHARGER_MANAGER
- bool "Battery charger manager for multiple chargers"
- depends on REGULATOR
- select EXTCON
- help
- Say Y to enable charger-manager support, which allows multiple
- chargers attached to a battery and multiple batteries attached to a
- system. The charger-manager also can monitor charging status in
- runtime and in suspend-to-RAM by waking up the system periodically
- with help of suspend_again support.
-
-config CHARGER_MAX14577
- tristate "Maxim MAX14577/77836 battery charger driver"
- depends on MFD_MAX14577
- help
- Say Y to enable support for the battery charger control sysfs and
- platform data of MAX14577/77836 MUICs.
-
-config CHARGER_MAX77693
- tristate "Maxim MAX77693 battery charger driver"
- depends on MFD_MAX77693
- help
- Say Y to enable support for the Maxim MAX77693 battery charger.
-
-config CHARGER_MAX8997
- tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
- depends on MFD_MAX8997 && REGULATOR_MAX8997
- help
- Say Y to enable support for the battery charger control sysfs and
- platform data of MAX8997/LP3974 PMICs.
-
-config CHARGER_MAX8998
- tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
- depends on MFD_MAX8998 && REGULATOR_MAX8998
- help
- Say Y to enable support for the battery charger control sysfs and
- platform data of MAX8998/LP3974 PMICs.
-
-config CHARGER_QCOM_SMBB
- tristate "Qualcomm Switch-Mode Battery Charger and Boost"
- depends on MFD_SPMI_PMIC || COMPILE_TEST
- depends on OF
- depends on EXTCON
- help
- Say Y to include support for the Switch-Mode Battery Charger and
- Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger
- is an integrated, single-cell lithium-ion battery charger. DT
- configuration is required for loading, see the devicetree
- documentation for more detail. The base name for this driver is
- 'pm8941_charger'.
-
-config CHARGER_BQ2415X
- tristate "TI BQ2415x battery charger driver"
- depends on I2C
- help
- Say Y to enable support for the TI BQ2415x battery charger
- PMICs.
-
- You'll need this driver to charge batteries on e.g. Nokia
- RX-51/N900.
-
-config CHARGER_BQ24190
- tristate "TI BQ24190 battery charger driver"
- depends on I2C
- depends on GPIOLIB || COMPILE_TEST
- help
- Say Y to enable support for the TI BQ24190 battery charger.
-
-config CHARGER_BQ24257
- tristate "TI BQ24250/24251/24257 battery charger driver"
- depends on I2C
- depends on GPIOLIB || COMPILE_TEST
- depends on REGMAP_I2C
- help
- Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
- chargers.
-
-config CHARGER_BQ24735
- tristate "TI BQ24735 battery charger support"
- depends on I2C
- depends on GPIOLIB || COMPILE_TEST
- help
- Say Y to enable support for the TI BQ24735 battery charger.
-
-config CHARGER_BQ25890
- tristate "TI BQ25890 battery charger driver"
- depends on I2C
- depends on GPIOLIB || COMPILE_TEST
- select REGMAP_I2C
- help
- Say Y to enable support for the TI BQ25890 battery charger.
-
-config CHARGER_SMB347
- tristate "Summit Microelectronics SMB347 Battery Charger"
- depends on I2C
- select REGMAP_I2C
- help
- Say Y to include support for Summit Microelectronics SMB347
- Battery Charger.
-
-config CHARGER_TPS65090
- tristate "TPS65090 battery charger driver"
- depends on MFD_TPS65090
- help
- Say Y here to enable support for battery charging with TPS65090
- PMIC chips.
-
-config CHARGER_TPS65217
- tristate "TPS65217 battery charger driver"
- depends on MFD_TPS65217
- help
- Say Y here to enable support for battery charging with TPS65217
- PMIC chips.
-
-config BATTERY_GAUGE_LTC2941
- tristate "LTC2941/LTC2943 Battery Gauge Driver"
- depends on I2C
- help
- Say Y here to include support for LTC2941 and LTC2943 Battery
- Gauge IC. The driver reports the charge count continuously, and
- measures the voltage and temperature every 10 seconds.
-
-config AB8500_BM
- bool "AB8500 Battery Management Driver"
- depends on AB8500_CORE && AB8500_GPADC
- help
- Say Y to include support for AB8500 battery management.
-
-config BATTERY_GOLDFISH
- tristate "Goldfish battery driver"
- depends on GOLDFISH || COMPILE_TEST
- depends on HAS_IOMEM
- help
- Say Y to enable support for the battery and AC power in the
- Goldfish emulator.
-
-config BATTERY_RT5033
- tristate "RT5033 fuel gauge support"
- depends on MFD_RT5033
- help
- This adds support for battery fuel gauge in Richtek RT5033 PMIC.
- The fuelgauge calculates and determines the battery state of charge
- according to battery open circuit voltage.
-
-config CHARGER_RT9455
- tristate "Richtek RT9455 battery charger driver"
- depends on I2C
- depends on GPIOLIB || COMPILE_TEST
- select REGMAP_I2C
- help
- Say Y to enable support for Richtek RT9455 battery charger.
-
-config AXP20X_POWER
- tristate "AXP20x power supply driver"
- depends on MFD_AXP20X
- help
- This driver provides support for the power supply features of
- AXP20x PMIC.
-
-endif # POWER_SUPPLY
-
-source "drivers/power/reset/Kconfig"
source "drivers/power/avs/Kconfig"
+source "drivers/power/reset/Kconfig"
+source "drivers/power/supply/Kconfig"
projects / cascardo / linux.git / blobdiff