* @local: Indicate a local master port or remote device access
* @destid: Destination ID of the device
* @hopcount: Number of switch hops to the device
+ * @rmap: pointer to location to store register map type info
*/
u32
rio_mport_get_physefb(struct rio_mport *port, int local,
- u16 destid, u8 hopcount)
+ u16 destid, u8 hopcount, u32 *rmap)
{
u32 ext_ftr_ptr;
u32 ftr_header;
ftr_header = RIO_GET_BLOCK_ID(ftr_header);
switch (ftr_header) {
- case RIO_EFB_SER_EP_ID_V13P:
- case RIO_EFB_SER_EP_REC_ID_V13P:
- case RIO_EFB_SER_EP_FREE_ID_V13P:
case RIO_EFB_SER_EP_ID:
case RIO_EFB_SER_EP_REC_ID:
case RIO_EFB_SER_EP_FREE_ID:
- case RIO_EFB_SER_EP_FREC_ID:
+ case RIO_EFB_SER_EP_M1_ID:
+ case RIO_EFB_SER_EP_SW_M1_ID:
+ case RIO_EFB_SER_EPF_M1_ID:
+ case RIO_EFB_SER_EPF_SW_M1_ID:
+ *rmap = 1;
+ return ext_ftr_ptr;
+ case RIO_EFB_SER_EP_M2_ID:
+ case RIO_EFB_SER_EP_SW_M2_ID:
+ case RIO_EFB_SER_EPF_M2_ID:
+ case RIO_EFB_SER_EPF_SW_M2_ID:
+ *rmap = 2;
return ext_ftr_ptr;
default:
u32 regval;
rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum),
- ®val);
+ RIO_DEV_PORT_N_CTL_CSR(rdev, pnum),
+ ®val);
if (lock)
regval |= RIO_PORT_N_CTL_LOCKOUT;
else
regval &= ~RIO_PORT_N_CTL_LOCKOUT;
rio_write_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum),
- regval);
+ RIO_DEV_PORT_N_CTL_CSR(rdev, pnum),
+ regval);
return 0;
}
EXPORT_SYMBOL_GPL(rio_set_port_lockout);
#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
u32 regval;
u32 ext_ftr_ptr;
+ u32 rmap;
/*
* enable rx input tx output port
pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
"%d, port_num = %d)\n", local, destid, hopcount, port_num);
- ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount);
+ ext_ftr_ptr = rio_mport_get_physefb(port, local, destid,
+ hopcount, &rmap);
if (local) {
- rio_local_read_config_32(port, ext_ftr_ptr +
- RIO_PORT_N_CTL_CSR(0),
+ rio_local_read_config_32(port,
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(0, rmap),
®val);
} else {
if (rio_mport_read_config_32(port, destid, hopcount,
- ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0)
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num, rmap),
+ ®val) < 0)
return -EIO;
}
- if (regval & RIO_PORT_N_CTL_P_TYP_SER) {
- /* serial */
- regval = regval | RIO_PORT_N_CTL_EN_RX_SER
- | RIO_PORT_N_CTL_EN_TX_SER;
- } else {
- /* parallel */
- regval = regval | RIO_PORT_N_CTL_EN_RX_PAR
- | RIO_PORT_N_CTL_EN_TX_PAR;
- }
+ regval = regval | RIO_PORT_N_CTL_EN_RX | RIO_PORT_N_CTL_EN_TX;
if (local) {
- rio_local_write_config_32(port, ext_ftr_ptr +
- RIO_PORT_N_CTL_CSR(0), regval);
+ rio_local_write_config_32(port,
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(0, rmap), regval);
} else {
if (rio_mport_write_config_32(port, destid, hopcount,
- ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0)
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num, rmap),
+ regval) < 0)
return -EIO;
}
#endif
/* Read from link maintenance response register
* to clear valid bit */
rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum),
+ RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, pnum),
®val);
udelay(50);
}
/* Issue Input-status command */
rio_write_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_MNT_REQ_CSR(pnum),
+ RIO_DEV_PORT_N_MNT_REQ_CSR(rdev, pnum),
RIO_MNT_REQ_CMD_IS);
/* Exit if the response is not expected */
while (checkcount--) {
udelay(50);
rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum),
+ RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, pnum),
®val);
if (regval & RIO_PORT_N_MNT_RSP_RVAL) {
*lnkresp = regval;
* @rdev: Pointer to RIO device control structure
* @pnum: Switch port number to clear errors
* @err_status: port error status (if 0 reads register from device)
+ *
+ * TODO: Currently this routine is not compatible with recovery process
+ * specified for idt_gen3 RapidIO switch devices. It has to be reviewed
+ * to implement universal recovery process that is compatible full range
+ * off available devices.
+ * IDT gen3 switch driver now implements HW-specific error handler that
+ * issues soft port reset to the port to reset ERR_STOP bits and ackIDs.
*/
static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status)
{
if (err_status == 0)
rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
+ RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
&err_status);
- if (err_status & RIO_PORT_N_ERR_STS_PW_OUT_ES) {
+ if (err_status & RIO_PORT_N_ERR_STS_OUT_ES) {
pr_debug("RIO_EM: servicing Output Error-Stopped state\n");
/*
* Send a Link-Request/Input-Status control symbol
far_ackid = (regval & RIO_PORT_N_MNT_RSP_ASTAT) >> 5;
far_linkstat = regval & RIO_PORT_N_MNT_RSP_LSTAT;
rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_ACK_STS_CSR(pnum),
+ RIO_DEV_PORT_N_ACK_STS_CSR(rdev, pnum),
®val);
pr_debug("RIO_EM: SP%d_ACK_STS_CSR=0x%08x\n", pnum, regval);
near_ackid = (regval & RIO_PORT_N_ACK_INBOUND) >> 24;
* far inbound.
*/
rio_write_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_ACK_STS_CSR(pnum),
+ RIO_DEV_PORT_N_ACK_STS_CSR(rdev, pnum),
(near_ackid << 24) |
(far_ackid << 8) | far_ackid);
/* Align far outstanding/outbound ackIDs with
* near inbound.
*/
far_ackid++;
- if (nextdev)
- rio_write_config_32(nextdev,
- nextdev->phys_efptr +
- RIO_PORT_N_ACK_STS_CSR(RIO_GET_PORT_NUM(nextdev->swpinfo)),
- (far_ackid << 24) |
- (near_ackid << 8) | near_ackid);
- else
- pr_debug("RIO_EM: Invalid nextdev pointer (NULL)\n");
+ if (!nextdev) {
+ pr_debug("RIO_EM: nextdev pointer == NULL\n");
+ goto rd_err;
+ }
+
+ rio_write_config_32(nextdev,
+ RIO_DEV_PORT_N_ACK_STS_CSR(nextdev,
+ RIO_GET_PORT_NUM(nextdev->swpinfo)),
+ (far_ackid << 24) |
+ (near_ackid << 8) | near_ackid);
}
rd_err:
- rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
- &err_status);
+ rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
+ &err_status);
pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status);
}
- if ((err_status & RIO_PORT_N_ERR_STS_PW_INP_ES) && nextdev) {
+ if ((err_status & RIO_PORT_N_ERR_STS_INP_ES) && nextdev) {
pr_debug("RIO_EM: servicing Input Error-Stopped state\n");
rio_get_input_status(nextdev,
RIO_GET_PORT_NUM(nextdev->swpinfo), NULL);
udelay(50);
- rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
- &err_status);
+ rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
+ &err_status);
pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status);
}
- return (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
- RIO_PORT_N_ERR_STS_PW_INP_ES)) ? 1 : 0;
+ return (err_status & (RIO_PORT_N_ERR_STS_OUT_ES |
+ RIO_PORT_N_ERR_STS_INP_ES)) ? 1 : 0;
}
/**
if (rdev->rswitch->ops && rdev->rswitch->ops->em_handle)
rdev->rswitch->ops->em_handle(rdev, portnum);
- rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
- &err_status);
+ rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
+ &err_status);
pr_debug("RIO_PW: SP%d_ERR_STS_CSR=0x%08x\n", portnum, err_status);
if (err_status & RIO_PORT_N_ERR_STS_PORT_OK) {
* Depending on the link partner state, two attempts
* may be needed for successful recovery.
*/
- if (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
- RIO_PORT_N_ERR_STS_PW_INP_ES)) {
+ if (err_status & (RIO_PORT_N_ERR_STS_OUT_ES |
+ RIO_PORT_N_ERR_STS_INP_ES)) {
if (rio_clr_err_stopped(rdev, portnum, err_status))
rio_clr_err_stopped(rdev, portnum, 0);
}
rdev->rswitch->port_ok &= ~(1 << portnum);
rio_set_port_lockout(rdev, portnum, 1);
+ if (rdev->phys_rmap == 1) {
rio_write_config_32(rdev,
- rdev->phys_efptr +
- RIO_PORT_N_ACK_STS_CSR(portnum),
+ RIO_DEV_PORT_N_ACK_STS_CSR(rdev, portnum),
RIO_PORT_N_ACK_CLEAR);
+ } else {
+ rio_write_config_32(rdev,
+ RIO_DEV_PORT_N_OB_ACK_CSR(rdev, portnum),
+ RIO_PORT_N_OB_ACK_CLEAR);
+ rio_write_config_32(rdev,
+ RIO_DEV_PORT_N_IB_ACK_CSR(rdev, portnum),
+ 0);
+ }
/* Schedule Extraction Service */
pr_debug("RIO_PW: Device Extraction on [%s]-P%d\n",
}
/* Clear remaining error bits and Port-Write Pending bit */
- rio_write_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
- err_status);
+ rio_write_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
+ err_status);
return 0;
}
* Tell if a device supports a given RapidIO capability.
* Returns the offset of the requested extended feature
* block within the device's RIO configuration space or
- * 0 in case the device does not support it. Possible
- * values for @ftr:
- *
- * %RIO_EFB_PAR_EP_ID LP/LVDS EP Devices
- *
- * %RIO_EFB_PAR_EP_REC_ID LP/LVDS EP Recovery Devices
- *
- * %RIO_EFB_PAR_EP_FREE_ID LP/LVDS EP Free Devices
- *
- * %RIO_EFB_SER_EP_ID LP/Serial EP Devices
- *
- * %RIO_EFB_SER_EP_REC_ID LP/Serial EP Recovery Devices
- *
- * %RIO_EFB_SER_EP_FREE_ID LP/Serial EP Free Devices
+ * 0 in case the device does not support it.
*/
u32
rio_mport_get_feature(struct rio_mport * port, int local, u16 destid,
projects / cascardo / linux.git / blobdiff