.ops = &axp20x_ops_sw,
};
-static const struct regulator_linear_range axp809_dcdc4_ranges[] = {
- REGULATOR_LINEAR_RANGE(600000, 0x0, 0x2f, 20000),
- REGULATOR_LINEAR_RANGE(1800000, 0x30, 0x38, 100000),
+static const struct regulator_linear_range axp806_dcdca_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0x0, 0x32, 10000),
+ REGULATOR_LINEAR_RANGE(1120000, 0x33, 0x47, 20000),
};
-static const struct regulator_linear_range axp809_dldo1_ranges[] = {
+static const struct regulator_linear_range axp806_dcdcd_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0x0, 0x2d, 20000),
+ REGULATOR_LINEAR_RANGE(1600000, 0x2e, 0x3f, 100000),
+};
+
+static const struct regulator_linear_range axp806_cldo2_ranges[] = {
REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000),
REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000),
};
+static const struct regulator_desc axp806_regulators[] = {
+ AXP_DESC_RANGES(AXP806, DCDCA, "dcdca", "vina", axp806_dcdca_ranges,
+ 72, AXP806_DCDCA_V_CTRL, 0x7f, AXP806_PWR_OUT_CTRL1,
+ BIT(0)),
+ AXP_DESC(AXP806, DCDCB, "dcdcb", "vinb", 1000, 2550, 50,
+ AXP806_DCDCB_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(1)),
+ AXP_DESC_RANGES(AXP806, DCDCC, "dcdcc", "vinc", axp806_dcdca_ranges,
+ 72, AXP806_DCDCC_V_CTRL, 0x7f, AXP806_PWR_OUT_CTRL1,
+ BIT(2)),
+ AXP_DESC_RANGES(AXP806, DCDCD, "dcdcd", "vind", axp806_dcdcd_ranges,
+ 64, AXP806_DCDCD_V_CTRL, 0x3f, AXP806_PWR_OUT_CTRL1,
+ BIT(3)),
+ AXP_DESC(AXP806, DCDCE, "dcdce", "vine", 1100, 3400, 100,
+ AXP806_DCDCB_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(4)),
+ AXP_DESC(AXP806, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
+ AXP806_ALDO1_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(5)),
+ AXP_DESC(AXP806, ALDO2, "aldo2", "aldoin", 700, 3400, 100,
+ AXP806_ALDO2_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(6)),
+ AXP_DESC(AXP806, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
+ AXP806_ALDO3_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(7)),
+ AXP_DESC(AXP806, BLDO1, "bldo1", "bldoin", 700, 1900, 100,
+ AXP806_BLDO1_V_CTRL, 0x0f, AXP806_PWR_OUT_CTRL2, BIT(0)),
+ AXP_DESC(AXP806, BLDO2, "bldo2", "bldoin", 700, 1900, 100,
+ AXP806_BLDO2_V_CTRL, 0x0f, AXP806_PWR_OUT_CTRL2, BIT(1)),
+ AXP_DESC(AXP806, BLDO3, "bldo3", "bldoin", 700, 1900, 100,
+ AXP806_BLDO3_V_CTRL, 0x0f, AXP806_PWR_OUT_CTRL2, BIT(2)),
+ AXP_DESC(AXP806, BLDO4, "bldo4", "bldoin", 700, 1900, 100,
+ AXP806_BLDO4_V_CTRL, 0x0f, AXP806_PWR_OUT_CTRL2, BIT(3)),
+ AXP_DESC(AXP806, CLDO1, "cldo1", "cldoin", 700, 3300, 100,
+ AXP806_CLDO1_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL2, BIT(4)),
+ AXP_DESC_RANGES(AXP806, CLDO2, "cldo2", "cldoin", axp806_cldo2_ranges,
+ 32, AXP806_CLDO2_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL2,
+ BIT(5)),
+ AXP_DESC(AXP806, CLDO3, "cldo3", "cldoin", 700, 3300, 100,
+ AXP806_CLDO3_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL2, BIT(6)),
+ AXP_DESC_SW(AXP806, SW, "sw", "swin", AXP806_PWR_OUT_CTRL2, BIT(7)),
+};
+
+static const struct regulator_linear_range axp809_dcdc4_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0x0, 0x2f, 20000),
+ REGULATOR_LINEAR_RANGE(1800000, 0x30, 0x38, 100000),
+};
+
static const struct regulator_desc axp809_regulators[] = {
AXP_DESC(AXP809, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(1)),
AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)),
AXP_DESC(AXP809, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
- AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin", axp809_dldo1_ranges,
+ AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin", axp806_cldo2_ranges,
32, AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
BIT(3)),
AXP_DESC(AXP809, DLDO2, "dldo2", "dldoin", 700, 3300, 100,
static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
{
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+ unsigned int reg = AXP20X_DCDC_FREQ;
u32 min, max, def, step;
switch (axp20x->variant) {
def = 1500;
step = 75;
break;
+ case AXP806_ID:
+ /*
+ * AXP806 DCDC work frequency setting has the same range and
+ * step as AXP22X, but at a different register.
+ * Fall through to the check below.
+ * (See include/linux/mfd/axp20x.h)
+ */
+ reg = AXP806_DCDC_FREQ_CTRL;
case AXP221_ID:
case AXP223_ID:
case AXP809_ID:
dcdcfreq = (dcdcfreq - min) / step;
- return regmap_update_bits(axp20x->regmap, AXP20X_DCDC_FREQ,
+ return regmap_update_bits(axp20x->regmap, reg,
AXP20X_FREQ_DCDC_MASK, dcdcfreq);
}
static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode)
{
struct axp20x_dev *axp20x = rdev_get_drvdata(rdev);
+ unsigned int reg = AXP20X_DCDC_MODE;
unsigned int mask;
switch (axp20x->variant) {
workmode <<= ffs(mask) - 1;
break;
+ case AXP806_ID:
+ reg = AXP806_DCDC_MODE_CTRL2;
+ /*
+ * AXP806 DCDC regulator IDs have the same range as AXP22X.
+ * Fall through to the check below.
+ * (See include/linux/mfd/axp20x.h)
+ */
case AXP221_ID:
case AXP223_ID:
case AXP809_ID:
return -EINVAL;
}
- return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask, workmode);
+ return regmap_update_bits(rdev->regmap, reg, mask, workmode);
+}
+
+/*
+ * This function checks whether a regulator is part of a poly-phase
+ * output setup based on the registers settings. Returns true if it is.
+ */
+static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id)
+{
+ u32 reg = 0;
+
+ /* Only AXP806 has poly-phase outputs */
+ if (axp20x->variant != AXP806_ID)
+ return false;
+
+ regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, ®);
+
+ switch (id) {
+ case AXP806_DCDCB:
+ return (((reg & GENMASK(7, 6)) == BIT(6)) ||
+ ((reg & GENMASK(7, 6)) == BIT(7)));
+ case AXP806_DCDCC:
+ return ((reg & GENMASK(7, 6)) == BIT(7));
+ case AXP806_DCDCE:
+ return !!(reg & BIT(5));
+ }
+
+ return false;
}
static int axp20x_regulator_probe(struct platform_device *pdev)
drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
"x-powers,drive-vbus-en");
break;
+ case AXP806_ID:
+ regulators = axp806_regulators;
+ nregulators = AXP806_REG_ID_MAX;
+ break;
case AXP809_ID:
regulators = axp809_regulators;
nregulators = AXP809_REG_ID_MAX;
const struct regulator_desc *desc = ®ulators[i];
struct regulator_desc *new_desc;
+ /*
+ * If this regulator is a slave in a poly-phase setup,
+ * skip it, as its controls are bound to the master
+ * regulator and won't work.
+ */
+ if (axp20x_is_polyphase_slave(axp20x, i))
+ continue;
+
/*
* Regulators DC1SW and DC5LDO are connected internally,
* so we have to handle their supply names separately.
projects / cascardo / linux.git / blobdiff