const char *supply_name);
static void _regulator_put(struct regulator *regulator);
+static struct regulator_dev *dev_to_rdev(struct device *dev)
+{
+ return container_of(dev, struct regulator_dev, dev);
+}
+
static const char *rdev_get_name(struct regulator_dev *rdev)
{
if (rdev->constraints && rdev->constraints->name)
return -ENODEV;
}
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) {
- rdev_err(rdev, "operation not allowed\n");
+ rdev_dbg(rdev, "operation not allowed\n");
return -EPERM;
}
return 0;
int current_uA = 0, output_uV, input_uV, err;
unsigned int mode;
+ lockdep_assert_held_once(&rdev->mutex);
+
/*
* first check to see if we can set modes at all, otherwise just
* tell the consumer everything is OK.
/* locks held by caller */
static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state)
{
+ lockdep_assert_held_once(&rdev->mutex);
+
if (!rdev->constraints)
return -EINVAL;
}
}
+ if (rdev->constraints->over_current_protection
+ && ops->set_over_current_protection) {
+ ret = ops->set_over_current_protection(rdev);
+ if (ret < 0) {
+ rdev_err(rdev, "failed to set over current protection\n");
+ goto out;
+ }
+ }
+
print_constraints(rdev);
return 0;
out:
{
struct regulator_dev *rdev;
- if (regulator == NULL || IS_ERR(regulator))
+ if (IS_ERR_OR_NULL(regulator))
return;
+ lockdep_assert_held_once(®ulator_list_mutex);
+
rdev = regulator->rdev;
debugfs_remove_recursive(regulator->debugfs);
if (regulator->dev)
sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
mutex_lock(&rdev->mutex);
- kfree(regulator->supply_name);
list_del(®ulator->list);
- kfree(regulator);
rdev->open_count--;
rdev->exclusive = 0;
mutex_unlock(&rdev->mutex);
+ kfree(regulator->supply_name);
+ kfree(regulator);
+
module_put(rdev->owner);
}
{
int ret;
+ lockdep_assert_held_once(&rdev->mutex);
+
/* check voltage and requested load before enabling */
if (rdev->constraints &&
(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS))
{
int ret = 0;
+ lockdep_assert_held_once(&rdev->mutex);
+
if (WARN(rdev->use_count <= 0,
"unbalanced disables for %s\n", rdev_get_name(rdev)))
return -EIO;
{
int ret = 0;
+ lockdep_assert_held_once(&rdev->mutex);
+
ret = _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
REGULATOR_EVENT_PRE_DISABLE, NULL);
if (ret & NOTIFY_STOP_MASK)
goto out;
/* If we're trying to set a range that overlaps the current voltage,
- * return succesfully even though the regulator does not support
+ * return successfully even though the regulator does not support
* changing the voltage.
*/
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
int regulator_notifier_call_chain(struct regulator_dev *rdev,
unsigned long event, void *data)
{
+ lockdep_assert_held_once(&rdev->mutex);
+
_notifier_call_chain(rdev, event, data);
return NOTIFY_DONE;
static void regulator_dev_release(struct device *dev)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
+
+ kfree(rdev->constraints);
+ of_node_put(rdev->dev.of_node);
kfree(rdev);
}
WARN_ON(rdev->open_count);
unset_regulator_supplies(rdev);
list_del(&rdev->list);
- kfree(rdev->constraints);
+ mutex_unlock(®ulator_list_mutex);
regulator_ena_gpio_free(rdev);
- of_node_put(rdev->dev.of_node);
device_unregister(&rdev->dev);
- mutex_unlock(®ulator_list_mutex);
}
EXPORT_SYMBOL_GPL(regulator_unregister);
/* init early to allow our consumers to complete system booting */
core_initcall(regulator_init);
-static int __init regulator_init_complete(void)
+static int __init regulator_late_cleanup(struct device *dev, void *data)
{
- struct regulator_dev *rdev;
- const struct regulator_ops *ops;
- struct regulation_constraints *c;
+ struct regulator_dev *rdev = dev_to_rdev(dev);
+ const struct regulator_ops *ops = rdev->desc->ops;
+ struct regulation_constraints *c = rdev->constraints;
int enabled, ret;
+ if (c && c->always_on)
+ return 0;
+
+ if (c && !(c->valid_ops_mask & REGULATOR_CHANGE_STATUS))
+ return 0;
+
+ mutex_lock(&rdev->mutex);
+
+ if (rdev->use_count)
+ goto unlock;
+
+ /* If we can't read the status assume it's on. */
+ if (ops->is_enabled)
+ enabled = ops->is_enabled(rdev);
+ else
+ enabled = 1;
+
+ if (!enabled)
+ goto unlock;
+
+ if (have_full_constraints()) {
+ /* We log since this may kill the system if it goes
+ * wrong. */
+ rdev_info(rdev, "disabling\n");
+ ret = _regulator_do_disable(rdev);
+ if (ret != 0)
+ rdev_err(rdev, "couldn't disable: %d\n", ret);
+ } else {
+ /* The intention is that in future we will
+ * assume that full constraints are provided
+ * so warn even if we aren't going to do
+ * anything here.
+ */
+ rdev_warn(rdev, "incomplete constraints, leaving on\n");
+ }
+
+unlock:
+ mutex_unlock(&rdev->mutex);
+
+ return 0;
+}
+
+static int __init regulator_init_complete(void)
+{
/*
* Since DT doesn't provide an idiomatic mechanism for
* enabling full constraints and since it's much more natural
if (of_have_populated_dt())
has_full_constraints = true;
- mutex_lock(®ulator_list_mutex);
-
/* If we have a full configuration then disable any regulators
* we have permission to change the status for and which are
* not in use or always_on. This is effectively the default
* for DT and ACPI as they have full constraints.
*/
- list_for_each_entry(rdev, ®ulator_list, list) {
- ops = rdev->desc->ops;
- c = rdev->constraints;
-
- if (c && c->always_on)
- continue;
-
- if (c && !(c->valid_ops_mask & REGULATOR_CHANGE_STATUS))
- continue;
-
- mutex_lock(&rdev->mutex);
-
- if (rdev->use_count)
- goto unlock;
-
- /* If we can't read the status assume it's on. */
- if (ops->is_enabled)
- enabled = ops->is_enabled(rdev);
- else
- enabled = 1;
-
- if (!enabled)
- goto unlock;
-
- if (have_full_constraints()) {
- /* We log since this may kill the system if it
- * goes wrong. */
- rdev_info(rdev, "disabling\n");
- ret = _regulator_do_disable(rdev);
- if (ret != 0)
- rdev_err(rdev, "couldn't disable: %d\n", ret);
- } else {
- /* The intention is that in future we will
- * assume that full constraints are provided
- * so warn even if we aren't going to do
- * anything here.
- */
- rdev_warn(rdev, "incomplete constraints, leaving on\n");
- }
-
-unlock:
- mutex_unlock(&rdev->mutex);
- }
-
- mutex_unlock(®ulator_list_mutex);
+ class_for_each_device(®ulator_class, NULL, NULL,
+ regulator_late_cleanup);
return 0;
}
projects / cascardo / linux.git / blobdiff