To compile this driver as a module, choose M here: the
module will be called dmx3191d.
-config SCSI_DTC3280
- tristate "DTC3180/3280 SCSI support"
- depends on ISA && SCSI
- select SCSI_SPI_ATTRS
- select CHECK_SIGNATURE
- help
- This is support for DTC 3180/3280 SCSI Host Adapters. Please read
- the SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, and the file
- <file:Documentation/scsi/dtc3x80.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called dtc.
-
config SCSI_EATA
tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
not allow targets to disconnect is not reasonable if there is more
than 1 device on a SCSI bus. The normal answer therefore is N.
-config SCSI_PAS16
- tristate "PAS16 SCSI support"
- depends on ISA && SCSI
- select SCSI_SPI_ATTRS
- ---help---
- This is support for a SCSI host adapter. It is explained in section
- 3.10 of the SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. If it doesn't work out
- of the box, you may have to change some settings in
- <file:drivers/scsi/pas16.h>.
-
- To compile this driver as a module, choose M here: the
- module will be called pas16.
-
config SCSI_QLOGIC_FAS
tristate "Qlogic FAS SCSI support"
depends on ISA && SCSI
To compile this driver as a module, choose M here: the
module will be called am53c974.
-config SCSI_T128
- tristate "Trantor T128/T128F/T228 SCSI support"
- depends on ISA && SCSI
- select SCSI_SPI_ATTRS
- select CHECK_SIGNATURE
- ---help---
- This is support for a SCSI host adapter. It is explained in section
- 3.11 of the SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. If it doesn't work out
- of the box, you may have to change some settings in
- <file:drivers/scsi/t128.h>. Note that Trantor was purchased by
- Adaptec, and some former Trantor products are being sold under the
- Adaptec name.
-
- To compile this driver as a module, choose M here: the
- module will be called t128.
-
-config SCSI_U14_34F
- tristate "UltraStor 14F/34F support"
- depends on ISA && SCSI && ISA_DMA_API
- ---help---
- This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
- The source at <file:drivers/scsi/u14-34f.c> contains some
- information about this hardware. If the driver doesn't work out of
- the box, you may have to change some settings in
- <file: drivers/scsi/u14-34f.c>. Read the SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. Note that there is also
- another driver for the same hardware: "UltraStor SCSI support",
- below. You should say Y to both only if you want 24F support as
- well.
-
- To compile this driver as a module, choose M here: the
- module will be called u14-34f.
-
-config SCSI_U14_34F_TAGGED_QUEUE
- bool "enable tagged command queueing"
- depends on SCSI_U14_34F
- help
- This is a feature of SCSI-2 which improves performance: the host
- adapter can send several SCSI commands to a device's queue even if
- previous commands haven't finished yet.
- This is equivalent to the "u14-34f=tc:y" boot option.
-
-config SCSI_U14_34F_LINKED_COMMANDS
- bool "enable elevator sorting"
- depends on SCSI_U14_34F
- help
- This option enables elevator sorting for all probed SCSI disks and
- CD-ROMs. It definitely reduces the average seek distance when doing
- random seeks, but this does not necessarily result in a noticeable
- performance improvement: your mileage may vary...
- This is equivalent to the "u14-34f=lc:y" boot option.
-
-config SCSI_U14_34F_MAX_TAGS
- int "maximum number of queued commands"
- depends on SCSI_U14_34F
- default "8"
- help
- This specifies how many SCSI commands can be maximally queued for
- each probed SCSI device. You should reduce the default value of 8
- only if you have disks with buggy or limited tagged command support.
- Minimum is 2 and maximum is 14. This value is also the window size
- used by the elevator sorting option above. The effective value used
- by the driver for each probed SCSI device is reported at boot time.
- This is equivalent to the "u14-34f=mq:8" boot option.
-
-config SCSI_ULTRASTOR
- tristate "UltraStor SCSI support"
- depends on X86 && ISA && SCSI && ISA_DMA_API
- ---help---
- This is support for the UltraStor 14F, 24F and 34F SCSI-2 host
- adapter family. This driver is explained in section 3.12 of the
- SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. If it doesn't work out
- of the box, you may have to change some settings in
- <file:drivers/scsi/ultrastor.h>.
-
- Note that there is also another driver for the same hardware:
- "UltraStor 14F/34F support", above.
-
- To compile this driver as a module, choose M here: the
- module will be called ultrastor.
-
config SCSI_NSP32
tristate "Workbit NinjaSCSI-32Bi/UDE support"
depends on PCI && SCSI && !64BIT
projects / cascardo / linux.git / blobdiff