*
* Added ISAPNP support for DTC436 adapters,
* Thomas Sailer, sailer@ife.ee.ethz.ch
- */
-
-/*
- * TODO : flesh out DMA support, find some one actually using this (I have
- * a memory mapped Trantor board that works fine)
- */
-
-/*
- * The card is detected and initialized in one of several ways :
- * 1. With command line overrides - NCR5380=port,irq may be
- * used on the LILO command line to override the defaults.
- *
- * 2. With the GENERIC_NCR5380_OVERRIDE compile time define. This is
- * specified as an array of address, irq, dma, board tuples. Ie, for
- * one board at 0x350, IRQ5, no dma, I could say
- * -DGENERIC_NCR5380_OVERRIDE={{0xcc000, 5, DMA_NONE, BOARD_NCR5380}}
- *
- * -1 should be specified for no or DMA interrupt, -2 to autoprobe for an
- * IRQ line if overridden on the command line.
*
- * 3. When included as a module, with arguments passed on the command line:
- * ncr_irq=xx the interrupt
- * ncr_addr=xx the port or base address (for port or memory
- * mapped, resp.)
- * ncr_dma=xx the DMA
- * ncr_5380=1 to set up for a NCR5380 board
- * ncr_53c400=1 to set up for a NCR53C400 board
- * e.g.
- * modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
- * for a port mapped NCR5380 board or
- * modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
- * for a memory mapped NCR53C400 board with interrupts disabled.
- *
- * 255 should be specified for no or DMA interrupt, 254 to autoprobe for an
- * IRQ line if overridden on the command line.
- *
+ * See Documentation/scsi/g_NCR5380.txt for more info.
*/
-#define AUTOPROBE_IRQ
-
-#ifdef CONFIG_SCSI_GENERIC_NCR53C400
-#define PSEUDO_DMA
-#endif
-
#include <asm/io.h>
#include <linux/blkdev.h>
#include <linux/module.h>
#ifndef SCSI_G_NCR5380_MEM
int i;
int port_idx = -1;
- unsigned long region_size = 16;
+ unsigned long region_size;
#endif
static unsigned int __initdata ncr_53c400a_ports[] = {
0x280, 0x290, 0x300, 0x310, 0x330, 0x340, 0x348, 0x350, 0
#ifdef SCSI_G_NCR5380_MEM
unsigned long base;
void __iomem *iomem;
+ resource_size_t iomem_size;
#endif
if (ncr_irq)
flags = 0;
switch (overrides[current_override].board) {
case BOARD_NCR5380:
- flags = FLAG_NO_PSEUDO_DMA;
- break;
- case BOARD_NCR53C400:
-#ifdef PSEUDO_DMA
- flags = FLAG_NO_DMA_FIXUP;
-#endif
+ flags = FLAG_NO_PSEUDO_DMA | FLAG_DMA_FIXUP;
break;
case BOARD_NCR53C400A:
- flags = FLAG_NO_DMA_FIXUP;
ports = ncr_53c400a_ports;
magic = ncr_53c400a_magic;
break;
case BOARD_HP_C2502:
- flags = FLAG_NO_DMA_FIXUP;
ports = ncr_53c400a_ports;
magic = hp_c2502_magic;
break;
case BOARD_DTC3181E:
- flags = FLAG_NO_DMA_FIXUP;
ports = dtc_3181e_ports;
magic = ncr_53c400a_magic;
break;
/* Disable the adapter and look for a free io port */
magic_configure(-1, 0, magic);
+ region_size = 16;
+
if (overrides[current_override].NCR5380_map_name != PORT_AUTO)
for (i = 0; ports[i]; i++) {
- if (!request_region(ports[i], 16, "ncr53c80"))
+ if (!request_region(ports[i], region_size, "ncr53c80"))
continue;
if (overrides[current_override].NCR5380_map_name == ports[i])
break;
- release_region(ports[i], 16);
+ release_region(ports[i], region_size);
} else
for (i = 0; ports[i]; i++) {
- if (!request_region(ports[i], 16, "ncr53c80"))
+ if (!request_region(ports[i], region_size, "ncr53c80"))
continue;
if (inb(ports[i]) == 0xff)
break;
- release_region(ports[i], 16);
+ release_region(ports[i], region_size);
}
if (ports[i]) {
/* At this point we have our region reserved */
else
{
/* Not a 53C400A style setup - just grab */
- if(!(request_region(overrides[current_override].NCR5380_map_name, NCR5380_region_size, "ncr5380")))
+ region_size = 8;
+ if (!request_region(overrides[current_override].NCR5380_map_name,
+ region_size, "ncr5380"))
continue;
- region_size = NCR5380_region_size;
}
#else
base = overrides[current_override].NCR5380_map_name;
- if (!request_mem_region(base, NCR5380_region_size, "ncr5380"))
+ iomem_size = NCR53C400_region_size;
+ if (!request_mem_region(base, iomem_size, "ncr5380"))
continue;
- iomem = ioremap(base, NCR5380_region_size);
+ iomem = ioremap(base, iomem_size);
if (!iomem) {
- release_mem_region(base, NCR5380_region_size);
+ release_mem_region(base, iomem_size);
continue;
}
#endif
#else
instance->base = overrides[current_override].NCR5380_map_name;
hostdata->iomem = iomem;
+ hostdata->iomem_size = iomem_size;
switch (overrides[current_override].board) {
case BOARD_NCR53C400:
hostdata->c400_ctl_status = 0x100;
}
#endif
- if (NCR5380_init(instance, flags))
+ if (NCR5380_init(instance, flags | FLAG_LATE_DMA_SETUP))
goto out_unregister;
switch (overrides[current_override].board) {
release_region(overrides[current_override].NCR5380_map_name, region_size);
#else
iounmap(iomem);
- release_mem_region(base, NCR5380_region_size);
+ release_mem_region(base, iomem_size);
#endif
return count;
}
#ifndef SCSI_G_NCR5380_MEM
release_region(instance->io_port, instance->n_io_port);
#else
- iounmap(((struct NCR5380_hostdata *)instance->hostdata)->iomem);
- release_mem_region(instance->base, NCR5380_region_size);
-#endif
- return 0;
-}
-
-#ifdef BIOSPARAM
-/**
- * generic_NCR5380_biosparam
- * @disk: disk to compute geometry for
- * @dev: device identifier for this disk
- * @ip: sizes to fill in
- *
- * Generates a BIOS / DOS compatible H-C-S mapping for the specified
- * device / size.
- *
- * XXX Most SCSI boards use this mapping, I could be incorrect. Someone
- * using hard disks on a trantor should verify that this mapping
- * corresponds to that used by the BIOS / ASPI driver by running the linux
- * fdisk program and matching the H_C_S coordinates to what DOS uses.
- *
- * Locks: none
- */
+ {
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
-static int
-generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev,
- sector_t capacity, int *ip)
-{
- ip[0] = 64;
- ip[1] = 32;
- ip[2] = capacity >> 11;
+ iounmap(hostdata->iomem);
+ release_mem_region(instance->base, hostdata->iomem_size);
+ }
+#endif
return 0;
}
-#endif
-
-#ifdef PSEUDO_DMA
/**
- * NCR5380_pread - pseudo DMA read
+ * generic_NCR5380_pread - pseudo DMA read
* @instance: adapter to read from
* @dst: buffer to read into
* @len: buffer length
* controller
*/
-static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
+static inline int generic_NCR5380_pread(struct Scsi_Host *instance,
+ unsigned char *dst, int len)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
int blocks = len / 128;
}
/**
- * NCR5380_write - pseudo DMA write
+ * generic_NCR5380_pwrite - pseudo DMA write
* @instance: adapter to read from
* @dst: buffer to read into
* @len: buffer length
* controller
*/
-static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
+static inline int generic_NCR5380_pwrite(struct Scsi_Host *instance,
+ unsigned char *src, int len)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
int blocks = len / 128;
return 0;
}
-static int generic_NCR5380_dma_xfer_len(struct scsi_cmnd *cmd)
+static int generic_NCR5380_dma_xfer_len(struct Scsi_Host *instance,
+ struct scsi_cmnd *cmd)
{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int transfersize = cmd->transfersize;
+ if (hostdata->flags & FLAG_NO_PSEUDO_DMA)
+ return 0;
+
/* Limit transfers to 32K, for xx400 & xx406
* pseudoDMA that transfers in 128 bytes blocks.
*/
return transfersize;
}
-#endif /* PSEUDO_DMA */
-
/*
* Include the NCR5380 core code that we build our driver around
*/
.queuecommand = generic_NCR5380_queue_command,
.eh_abort_handler = generic_NCR5380_abort,
.eh_bus_reset_handler = generic_NCR5380_bus_reset,
- .bios_param = NCR5380_BIOSPARAM,
.can_queue = 16,
.this_id = 7,
.sg_tablesize = SG_ALL,
projects / cascardo / linux.git / blobdiff