* depth for a scsi device. This function sets the queue depth to the new
* value and sends an event out to log the queue depth change.
**/
-int
+static int
lpfc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
{
struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
{
unsigned long flags;
uint32_t evt_posted;
+ unsigned long expires;
spin_lock_irqsave(&phba->hbalock, flags);
atomic_inc(&phba->num_rsrc_err);
phba->last_rsrc_error_time = jiffies;
- if ((phba->last_ramp_down_time + QUEUE_RAMP_DOWN_INTERVAL) > jiffies) {
+ expires = phba->last_ramp_down_time + QUEUE_RAMP_DOWN_INTERVAL;
+ if (time_after(expires, jiffies)) {
spin_unlock_irqrestore(&phba->hbalock, flags);
return;
}
*
* Returns: 0 = failure, non-zero number of successfully posted buffers.
**/
-int
+static int
lpfc_sli4_post_scsi_sgl_list(struct lpfc_hba *phba,
struct list_head *post_sblist, int sb_count)
{
* on the specified data using a CRC algorithmn
* using crc_t10dif.
*/
-uint16_t
+static uint16_t
lpfc_bg_crc(uint8_t *data, int count)
{
uint16_t crc = 0;
* on the specified data using a CSUM algorithmn
* using ip_compute_csum.
*/
-uint16_t
+static uint16_t
lpfc_bg_csum(uint8_t *data, int count)
{
uint16_t ret;
* This function examines the protection data to try to determine
* what type of T10-DIF error occurred.
*/
-void
+static void
lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
{
struct scatterlist *sgpe; /* s/g prot entry */
*/
if ((phba->cfg_fof) && ((struct lpfc_device_data *)
scsi_cmnd->device->hostdata)->oas_enabled)
- lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_OAS;
+ lpfc_cmd->cur_iocbq.iocb_flag |= (LPFC_IO_OAS | LPFC_IO_FOF);
return 0;
}
*/
iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
+ /*
+ * If the OAS driver feature is enabled and the lun is enabled for
+ * OAS, set the oas iocb related flags.
+ */
+ if ((phba->cfg_fof) && ((struct lpfc_device_data *)
+ scsi_cmnd->device->hostdata)->oas_enabled)
+ lpfc_cmd->cur_iocbq.iocb_flag |= (LPFC_IO_OAS | LPFC_IO_FOF);
+
return 0;
err:
if (lpfc_cmd->seg_cnt)
/* ABTS WQE must go to the same WQ as the WQE to be aborted */
abtsiocb->fcp_wqidx = iocb->fcp_wqidx;
abtsiocb->iocb_flag |= LPFC_USE_FCPWQIDX;
+ if (iocb->iocb_flag & LPFC_IO_FOF)
+ abtsiocb->iocb_flag |= LPFC_IO_FOF;
if (lpfc_is_link_up(phba))
icmd->ulpCommand = CMD_ABORT_XRI_CN;
if (status == FAILED) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0722 Target Reset rport failure: rdata x%p\n", rdata);
- return FAILED;
+ spin_lock_irq(shost->host_lock);
+ pnode->nlp_flag &= ~NLP_NPR_ADISC;
+ pnode->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
+ spin_unlock_irq(shost->host_lock);
+ lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
+ LPFC_CTX_TGT);
+ return FAST_IO_FAIL;
}
scsi_event.event_type = FC_REG_SCSI_EVENT;