case MBX_RESUME_RPI:
case MBX_READ_EVENT_LOG_STATUS:
case MBX_READ_EVENT_LOG:
+ case MBX_SECURITY_MGMT:
+ case MBX_AUTH_PORT:
ret = mbxCommand;
break;
default:
void
lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
+ struct lpfc_vport *vport = pmb->vport;
struct lpfc_dmabuf *mp;
+ struct lpfc_nodelist *ndlp;
uint16_t rpi, vpi;
int rc;
- struct lpfc_vport *vport = pmb->vport;
mp = (struct lpfc_dmabuf *) (pmb->context1);
return;
}
+ if (pmb->u.mb.mbxCommand == MBX_REG_LOGIN64) {
+ ndlp = (struct lpfc_nodelist *)pmb->context2;
+ lpfc_nlp_put(ndlp);
+ pmb->context2 = NULL;
+ }
+
+ /* Check security permission status on INIT_LINK mailbox command */
+ if ((pmb->u.mb.mbxCommand == MBX_INIT_LINK) &&
+ (pmb->u.mb.mbxStatus == MBXERR_SEC_NO_PERMISSION))
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "2860 SLI authentication is required "
+ "for INIT_LINK but has not done yet\n");
+
if (bf_get(lpfc_mqe_command, &pmb->u.mqe) == MBX_SLI4_CONFIG)
lpfc_sli4_mbox_cmd_free(phba, pmb);
else
i = 0;
while ((status & (HS_FFRDY | HS_MBRDY)) != (HS_FFRDY | HS_MBRDY)) {
- /* Check every 100ms for 5 retries, then every 500ms for 5, then
- * every 2.5 sec for 5, then reset board and every 2.5 sec for
- * 4.
+ /* Check every 10ms for 10 retries, then every 100ms for 90
+ * retries, then every 1 sec for 50 retires for a total of
+ * ~60 seconds before reset the board again and check every
+ * 1 sec for 50 retries. The up to 60 seconds before the
+ * board ready is required by the Falcon FIPS zeroization
+ * complete, and any reset the board in between shall cause
+ * restart of zeroization, further delay the board ready.
*/
- if (i++ >= 20) {
+ if (i++ >= 200) {
/* Adapter failed to init, timeout, status reg
<status> */
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
return -EIO;
}
- if (i <= 5) {
+ if (i <= 10)
msleep(10);
- } else if (i <= 10) {
- msleep(500);
- } else {
- msleep(2500);
- }
+ else if (i <= 100)
+ msleep(100);
+ else
+ msleep(1000);
- if (i == 15) {
- /* Do post */
+ if (i == 150) {
+ /* Do post */
phba->pport->port_state = LPFC_VPORT_UNKNOWN;
lpfc_sli_brdrestart(phba);
}
*
* Return codes
* 0 - successful
- * ENOMEM - could not allocated memory.
+ * -ENOMEM - could not allocated memory.
**/
static int
lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
* lpfc_sli4_scmd_to_wqidx_distr - scsi command to SLI4 WQ index distribution
* @phba: Pointer to HBA context object.
*
- * This routine performs a round robin SCSI command to SLI4 FCP WQ index
+ * This routine performs a roundrobin SCSI command to SLI4 FCP WQ index
* distribution. This is called by __lpfc_sli_issue_iocb_s4() with the hbalock
* held.
*
uint8_t command_type = ELS_COMMAND_NON_FIP;
uint8_t cmnd;
uint16_t xritag;
+ uint16_t abrt_iotag;
+ struct lpfc_iocbq *abrtiocbq;
struct ulp_bde64 *bpl = NULL;
uint32_t els_id = ELS_ID_DEFAULT;
int numBdes, i;
case CMD_ABORT_XRI_CX:
/* words 0-2 memcpy should be 0 rserved */
/* port will send abts */
- if (iocbq->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
+ abrt_iotag = iocbq->iocb.un.acxri.abortContextTag;
+ if (abrt_iotag != 0 && abrt_iotag <= phba->sli.last_iotag) {
+ abrtiocbq = phba->sli.iocbq_lookup[abrt_iotag];
+ fip = abrtiocbq->iocb_flag & LPFC_FIP_ELS_ID_MASK;
+ } else
+ fip = 0;
+
+ if ((iocbq->iocb.ulpCommand == CMD_CLOSE_XRI_CN) || fip)
/*
- * The link is down so the fw does not need to send abts
+ * The link is down, or the command was ELS_FIP
+ * so the fw does not need to send abts
* on the wire.
*/
bf_set(abort_cmd_ia, &wqe->abort_cmd, 1);
return 1;
}
-/**
- * lpfc_sli4_hba_down - PCI function resource cleanup for the SLI4 HBA
- * @phba: Pointer to HBA context object.
- *
- * This function cleans up all queues, iocb, buffers, mailbox commands while
- * shutting down the SLI4 HBA FCoE function. This function is called with no
- * lock held and always returns 1.
- *
- * This function does the following to cleanup driver FCoE function resources:
- * - Free discovery resources for each virtual port
- * - Cleanup any pending fabric iocbs
- * - Iterate through the iocb txq and free each entry in the list.
- * - Free up any buffer posted to the HBA.
- * - Clean up all the queue entries: WQ, RQ, MQ, EQ, CQ, etc.
- * - Free mailbox commands in the mailbox queue.
- **/
-int
-lpfc_sli4_hba_down(struct lpfc_hba *phba)
-{
- /* Stop the SLI4 device port */
- lpfc_stop_port(phba);
-
- /* Tear down the queues in the HBA */
- lpfc_sli4_queue_unset(phba);
-
- /* unregister default FCFI from the HBA */
- lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
-
- return 1;
-}
-
/**
* lpfc_sli_pcimem_bcopy - SLI memory copy function
* @srcp: Source memory pointer.
/* Check if there is a deferred error condition is active */
if ((HS_FFER1 & phba->work_hs) &&
((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
- HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+ HS_FFER6 | HS_FFER7 | HS_FFER8) & phba->work_hs)) {
phba->hba_flag |= DEFER_ERATT;
/* Clear all interrupt enable conditions */
writel(0, phba->HCregaddr);
*/
if ((HS_FFER1 & phba->work_hs) &&
((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
- HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+ HS_FFER6 | HS_FFER7 | HS_FFER8) &
+ phba->work_hs)) {
phba->hba_flag |= DEFER_ERATT;
/* Clear all interrupt enable conditions */
writel(0, phba->HCregaddr);
* If there is deferred error attention, do not check for any interrupt.
*/
if (unlikely(phba->hba_flag & DEFER_ERATT)) {
- spin_unlock_irq(&phba->hbalock);
+ spin_unlock(&phba->hbalock);
return IRQ_NONE;
}
* command to finish before continuing.
*
* On success this function will return a zero. If unable to allocate enough
- * memory this function will return ENOMEM. If the queue create mailbox command
- * fails this function will return ENXIO.
+ * memory this function will return -ENOMEM. If the queue create mailbox command
+ * fails this function will return -ENXIO.
**/
uint32_t
lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint16_t imax)
* command to finish before continuing.
*
* On success this function will return a zero. If unable to allocate enough
- * memory this function will return ENOMEM. If the queue create mailbox command
- * fails this function will return ENXIO.
+ * memory this function will return -ENOMEM. If the queue create mailbox command
+ * fails this function will return -ENXIO.
**/
uint32_t
lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
* command to finish before continuing.
*
* On success this function will return a zero. If unable to allocate enough
- * memory this function will return ENOMEM. If the queue create mailbox command
- * fails this function will return ENXIO.
+ * memory this function will return -ENOMEM. If the queue create mailbox command
+ * fails this function will return -ENXIO.
**/
int32_t
lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
* command to finish before continuing.
*
* On success this function will return a zero. If unable to allocate enough
- * memory this function will return ENOMEM. If the queue create mailbox command
- * fails this function will return ENXIO.
+ * memory this function will return -ENOMEM. If the queue create mailbox command
+ * fails this function will return -ENXIO.
**/
uint32_t
lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
* mailbox command to finish before continuing.
*
* On success this function will return a zero. If unable to allocate enough
- * memory this function will return ENOMEM. If the queue create mailbox command
- * fails this function will return ENXIO.
+ * memory this function will return -ENOMEM. If the queue create mailbox command
+ * fails this function will return -ENXIO.
**/
uint32_t
lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
* The @eq struct is used to get the queue ID of the queue to destroy.
*
* On success this function will return a zero. If the queue destroy mailbox
- * command fails this function will return ENXIO.
+ * command fails this function will return -ENXIO.
**/
uint32_t
lpfc_eq_destroy(struct lpfc_hba *phba, struct lpfc_queue *eq)
* The @cq struct is used to get the queue ID of the queue to destroy.
*
* On success this function will return a zero. If the queue destroy mailbox
- * command fails this function will return ENXIO.
+ * command fails this function will return -ENXIO.
**/
uint32_t
lpfc_cq_destroy(struct lpfc_hba *phba, struct lpfc_queue *cq)
* The @mq struct is used to get the queue ID of the queue to destroy.
*
* On success this function will return a zero. If the queue destroy mailbox
- * command fails this function will return ENXIO.
+ * command fails this function will return -ENXIO.
**/
uint32_t
lpfc_mq_destroy(struct lpfc_hba *phba, struct lpfc_queue *mq)
* The @wq struct is used to get the queue ID of the queue to destroy.
*
* On success this function will return a zero. If the queue destroy mailbox
- * command fails this function will return ENXIO.
+ * command fails this function will return -ENXIO.
**/
uint32_t
lpfc_wq_destroy(struct lpfc_hba *phba, struct lpfc_queue *wq)
* The @rq struct is used to get the queue ID of the queue to destroy.
*
* On success this function will return a zero. If the queue destroy mailbox
- * command fails this function will return ENXIO.
+ * command fails this function will return -ENXIO.
**/
uint32_t
lpfc_rq_destroy(struct lpfc_hba *phba, struct lpfc_queue *hrq,
}
return 0;
}
-/**
- * lpfc_sli4_remove_all_sgl_pages - Post scatter gather list for an XRI to HBA
- * @phba: The virtual port for which this call being executed.
- *
- * This routine will remove all of the sgl pages registered with the hba.
- *
- * Return codes:
- * 0 - Success
- * -ENXIO, -ENOMEM - Failure
- **/
-int
-lpfc_sli4_remove_all_sgl_pages(struct lpfc_hba *phba)
-{
- LPFC_MBOXQ_t *mbox;
- int rc;
- uint32_t shdr_status, shdr_add_status;
- union lpfc_sli4_cfg_shdr *shdr;
-
- mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (!mbox)
- return -ENOMEM;
-
- lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
- LPFC_MBOX_OPCODE_FCOE_REMOVE_SGL_PAGES, 0,
- LPFC_SLI4_MBX_EMBED);
- if (!phba->sli4_hba.intr_enable)
- rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
- else
- rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
- /* The IOCTL status is embedded in the mailbox subheader. */
- shdr = (union lpfc_sli4_cfg_shdr *)
- &mbox->u.mqe.un.sli4_config.header.cfg_shdr;
- shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
- shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
- if (rc != MBX_TIMEOUT)
- mempool_free(mbox, phba->mbox_mem_pool);
- if (shdr_status || shdr_add_status || rc) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2512 REMOVE_ALL_SGL_PAGES mailbox failed with "
- "status x%x add_status x%x, mbx status x%x\n",
- shdr_status, shdr_add_status, rc);
- rc = -ENXIO;
- }
- return rc;
-}
/**
* lpfc_sli4_next_xritag - Get an xritag for the io
*
* Return codes
* 0 - successful
- * EIO - The mailbox failed to complete successfully.
+ * -EIO - The mailbox failed to complete successfully.
* When this error occurs, the driver is not guaranteed
* to have any rpi regions posted to the device and
* must either attempt to repost the regions or take a
*
* Return codes
* 0 - successful
- * ENOMEM - No available memory
- * EIO - The mailbox failed to complete successfully.
+ * -ENOMEM - No available memory
+ * -EIO - The mailbox failed to complete successfully.
**/
int
lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page)
/* Issue the mailbox command asynchronously */
mboxq->vport = phba->pport;
mboxq->mbox_cmpl = lpfc_mbx_cmpl_fcf_scan_read_fcf_rec;
+
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag |= FCF_TS_INPROG;
+ spin_unlock_irq(&phba->hbalock);
+
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED)
error = -EIO;
else {
- spin_lock_irq(&phba->hbalock);
- phba->hba_flag |= FCF_DISC_INPROGRESS;
- spin_unlock_irq(&phba->hbalock);
/* Reset eligible FCF count for new scan */
if (fcf_index == LPFC_FCOE_FCF_GET_FIRST)
phba->fcf.eligible_fcf_cnt = 0;
if (error) {
if (mboxq)
lpfc_sli4_mbox_cmd_free(phba, mboxq);
- /* FCF scan failed, clear FCF_DISC_INPROGRESS flag */
+ /* FCF scan failed, clear FCF_TS_INPROG flag */
spin_lock_irq(&phba->hbalock);
- phba->hba_flag &= ~FCF_DISC_INPROGRESS;
+ phba->hba_flag &= ~FCF_TS_INPROG;
spin_unlock_irq(&phba->hbalock);
}
return error;
}
/**
- * lpfc_sli4_fcf_rr_read_fcf_rec - Read hba fcf record for round robin fcf.
+ * lpfc_sli4_fcf_rr_read_fcf_rec - Read hba fcf record for roundrobin fcf.
* @phba: pointer to lpfc hba data structure.
* @fcf_index: FCF table entry offset.
*
* This routine is invoked to read an FCF record indicated by @fcf_index
- * and to use it for FLOGI round robin FCF failover.
+ * and to use it for FLOGI roundrobin FCF failover.
*
* Return 0 if the mailbox command is submitted sucessfully, none 0
* otherwise.
* @fcf_index: FCF table entry offset.
*
* This routine is invoked to read an FCF record indicated by @fcf_index to
- * determine whether it's eligible for FLOGI round robin failover list.
+ * determine whether it's eligible for FLOGI roundrobin failover list.
*
* Return 0 if the mailbox command is submitted sucessfully, none 0
* otherwise.
*
* This routine is to get the next eligible FCF record index in a round
* robin fashion. If the next eligible FCF record index equals to the
- * initial round robin FCF record index, LPFC_FCOE_FCF_NEXT_NONE (0xFFFF)
+ * initial roundrobin FCF record index, LPFC_FCOE_FCF_NEXT_NONE (0xFFFF)
* shall be returned, otherwise, the next eligible FCF record's index
* shall be returned.
**/
return LPFC_FCOE_FCF_NEXT_NONE;
}
- /* Check roundrobin failover index bmask stop condition */
- if (next_fcf_index == phba->fcf.fcf_rr_init_indx) {
- if (!(phba->fcf.fcf_flag & FCF_REDISC_RRU)) {
- lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
- "2847 Round robin failover FCF index "
- "search hit stop condition:x%x\n",
- next_fcf_index);
- return LPFC_FCOE_FCF_NEXT_NONE;
- }
- /* The roundrobin failover index bmask updated, start over */
- lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
- "2848 Round robin failover FCF index bmask "
- "updated, start over\n");
- spin_lock_irq(&phba->hbalock);
- phba->fcf.fcf_flag &= ~FCF_REDISC_RRU;
- spin_unlock_irq(&phba->hbalock);
- return phba->fcf.fcf_rr_init_indx;
- }
-
lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
- "2845 Get next round robin failover "
- "FCF index x%x\n", next_fcf_index);
+ "2845 Get next roundrobin failover FCF (x%x)\n",
+ next_fcf_index);
+
return next_fcf_index;
}
* @phba: pointer to lpfc hba data structure.
*
* This routine sets the FCF record index in to the eligible bmask for
- * round robin failover search. It checks to make sure that the index
+ * roundrobin failover search. It checks to make sure that the index
* does not go beyond the range of the driver allocated bmask dimension
* before setting the bit.
*
{
if (fcf_index >= LPFC_SLI4_FCF_TBL_INDX_MAX) {
lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
- "2610 HBA FCF index reached driver's "
- "book keeping dimension: fcf_index:%d, "
- "driver_bmask_max:%d\n",
+ "2610 FCF (x%x) reached driver's book "
+ "keeping dimension:x%x\n",
fcf_index, LPFC_SLI4_FCF_TBL_INDX_MAX);
return -EINVAL;
}
/* Set the eligible FCF record index bmask */
set_bit(fcf_index, phba->fcf.fcf_rr_bmask);
- /* Set the roundrobin index bmask updated */
- spin_lock_irq(&phba->hbalock);
- phba->fcf.fcf_flag |= FCF_REDISC_RRU;
- spin_unlock_irq(&phba->hbalock);
-
lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
- "2790 Set FCF index x%x to round robin failover "
+ "2790 Set FCF (x%x) to roundrobin FCF failover "
"bmask\n", fcf_index);
return 0;
* @phba: pointer to lpfc hba data structure.
*
* This routine clears the FCF record index from the eligible bmask for
- * round robin failover search. It checks to make sure that the index
+ * roundrobin failover search. It checks to make sure that the index
* does not go beyond the range of the driver allocated bmask dimension
* before clearing the bit.
**/
{
if (fcf_index >= LPFC_SLI4_FCF_TBL_INDX_MAX) {
lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
- "2762 HBA FCF index goes beyond driver's "
- "book keeping dimension: fcf_index:%d, "
- "driver_bmask_max:%d\n",
+ "2762 FCF (x%x) reached driver's book "
+ "keeping dimension:x%x\n",
fcf_index, LPFC_SLI4_FCF_TBL_INDX_MAX);
return;
}
clear_bit(fcf_index, phba->fcf.fcf_rr_bmask);
lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
- "2791 Clear FCF index x%x from round robin failover "
+ "2791 Clear FCF (x%x) from roundrobin failover "
"bmask\n", fcf_index);
}
}
} else {
lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
- "2775 Start FCF rediscovery quiescent period "
- "wait timer before scaning FCF table\n");
+ "2775 Start FCF rediscover quiescent timer\n");
/*
* Start FCF rediscovery wait timer for pending FCF
* before rescan FCF record table.
LPFC_MBOXQ_t *mb, *nextmb;
struct lpfc_dmabuf *mp;
struct lpfc_nodelist *ndlp;
+ struct lpfc_nodelist *act_mbx_ndlp = NULL;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+ LIST_HEAD(mbox_cmd_list);
+ /* Clean up internally queued mailbox commands with the vport */
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
if (mb->vport != vport)
(mb->u.mb.mbxCommand != MBX_REG_VPI))
continue;
+ list_del(&mb->list);
+ list_add_tail(&mb->list, &mbox_cmd_list);
+ }
+ /* Clean up active mailbox command with the vport */
+ mb = phba->sli.mbox_active;
+ if (mb && (mb->vport == vport)) {
+ if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) ||
+ (mb->u.mb.mbxCommand == MBX_REG_VPI))
+ mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ if (mb->u.mb.mbxCommand == MBX_REG_LOGIN64) {
+ act_mbx_ndlp = (struct lpfc_nodelist *)mb->context2;
+ /* Put reference count for delayed processing */
+ act_mbx_ndlp = lpfc_nlp_get(act_mbx_ndlp);
+ /* Unregister the RPI when mailbox complete */
+ mb->mbox_flag |= LPFC_MBX_IMED_UNREG;
+ }
+ }
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Release the cleaned-up mailbox commands */
+ while (!list_empty(&mbox_cmd_list)) {
+ list_remove_head(&mbox_cmd_list, mb, LPFC_MBOXQ_t, list);
if (mb->u.mb.mbxCommand == MBX_REG_LOGIN64) {
if (phba->sli_rev == LPFC_SLI_REV4)
__lpfc_sli4_free_rpi(phba,
kfree(mp);
}
ndlp = (struct lpfc_nodelist *) mb->context2;
+ mb->context2 = NULL;
if (ndlp) {
- spin_lock_irq(shost->host_lock);
+ spin_lock(shost->host_lock);
ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL;
- spin_unlock_irq(shost->host_lock);
+ spin_unlock(shost->host_lock);
lpfc_nlp_put(ndlp);
- mb->context2 = NULL;
}
}
- list_del(&mb->list);
mempool_free(mb, phba->mbox_mem_pool);
}
- mb = phba->sli.mbox_active;
- if (mb && (mb->vport == vport)) {
- if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) ||
- (mb->u.mb.mbxCommand == MBX_REG_VPI))
- mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
- if (mb->u.mb.mbxCommand == MBX_REG_LOGIN64) {
- ndlp = (struct lpfc_nodelist *) mb->context2;
- if (ndlp) {
- spin_lock_irq(shost->host_lock);
- ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL;
- spin_unlock_irq(shost->host_lock);
- lpfc_nlp_put(ndlp);
- mb->context2 = NULL;
- }
- /* Unregister the RPI when mailbox complete */
- mb->mbox_flag |= LPFC_MBX_IMED_UNREG;
- }
+
+ /* Release the ndlp with the cleaned-up active mailbox command */
+ if (act_mbx_ndlp) {
+ spin_lock(shost->host_lock);
+ act_mbx_ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL;
+ spin_unlock(shost->host_lock);
+ lpfc_nlp_put(act_mbx_ndlp);
}
- spin_unlock_irq(&phba->hbalock);
}
/**
projects / cascardo / linux.git / blobdiff