[SCSI] ipr: Bump version

[cascardo/linux.git] / drivers / serial / pxa.c

diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index ff5e630..77d4568 100644 (file)
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -107,14 +107,6 @@ receive_chars(struct uart_pxa_port *up, int *status, struct pt_regs *regs)
        int max_count = 256;
 
        do {
-               if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
-                       if (tty->low_latency)
-                               tty_flip_buffer_push(tty);
-                       /*
-                        * If this failed then we will throw away the
-                        * bytes but must do so to clear interrupts
-                        */
-               }
                ch = serial_in(up, UART_RX);
                flag = TTY_NORMAL;
                up->port.icount.rx++;
@@ -361,7 +353,7 @@ static int serial_pxa_startup(struct uart_port *port)
        if (port->line == 3) /* HWUART */
                up->mcr |= UART_MCR_AFE;
        else
-       up->mcr = 0;
+               up->mcr = 0;
 
        /*
         * Allocate the IRQ
@@ -627,6 +619,14 @@ static inline void wait_for_xmitr(struct uart_pxa_port *up)
        }
 }
 
+static void serial_pxa_console_putchar(struct uart_port *port, int ch)
+{
+       struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+       wait_for_xmitr(up);
+       serial_out(up, UART_TX, ch);
+}
+
 /*
  * Print a string to the serial port trying not to disturb
  * any possible real use of the port...
@@ -638,30 +638,14 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
 {
        struct uart_pxa_port *up = &serial_pxa_ports[co->index];
        unsigned int ier;
-       int i;
 
        /*
-        *      First save the UER then disable the interrupts
+        *      First save the IER then disable the interrupts
         */
        ier = serial_in(up, UART_IER);
        serial_out(up, UART_IER, UART_IER_UUE);
 
-       /*
-        *      Now, do each character
-        */
-       for (i = 0; i < count; i++, s++) {
-               wait_for_xmitr(up);
-
-               /*
-                *      Send the character out.
-                *      If a LF, also do CR...
-                */
-               serial_out(up, UART_TX, *s);
-               if (*s == 10) {
-                       wait_for_xmitr(up);
-                       serial_out(up, UART_TX, 13);
-               }
-       }
+       uart_console_write(&up->port, s, count, serial_pxa_console_putchar);
 
        /*
         *      Finally, wait for transmitter to become empty