Remove obsolete #include <linux/config.h>

[cascardo/linux.git] / drivers / serial / serial_txx9.c

diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 141173e..28c1881 100644 (file)
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -38,7 +38,6 @@
  *             Fix some spin_locks.
  *             Do not call uart_add_one_port for absent ports.
  */
-#include <linux/config.h>
 
 #if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
@@ -69,12 +68,10 @@ static char *serial_name = "TX39/49 Serial driver";
 #if !defined(CONFIG_SERIAL_TXX9_STDSERIAL)
 /* "ttyS" is used for standard serial driver */
 #define TXX9_TTY_NAME "ttyTX"
-#define TXX9_TTY_DEVFS_NAME "tttx/"
 #define TXX9_TTY_MINOR_START   (64 + 64)       /* ttyTX0(128), ttyTX1(129) */
 #else
 /* acts like standard serial driver */
 #define TXX9_TTY_NAME "ttyS"
-#define TXX9_TTY_DEVFS_NAME "tts/"
 #define TXX9_TTY_MINOR_START   64
 #endif
 #define TXX9_TTY_MAJOR TTY_MAJOR
@@ -483,7 +480,7 @@ static int serial_txx9_startup(struct uart_port *port)
 
        /*
         * Clear the FIFO buffers and disable them.
-        * (they will be reeanbled in set_termios())
+        * (they will be reenabled in set_termios())
         */
        sio_set(up, TXX9_SIFCR,
                TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
@@ -863,6 +860,14 @@ static inline void wait_for_xmitr(struct uart_txx9_port *up)
        }
 }
 
+static void serial_txx9_console_putchar(struct uart_port *port, int ch)
+{
+       struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+
+       wait_for_xmitr(up);
+       sio_out(up, TXX9_SITFIFO, ch);
+}
+
 /*
  *     Print a string to the serial port trying not to disturb
  *     any possible real use of the port...
@@ -874,7 +879,6 @@ serial_txx9_console_write(struct console *co, const char *s, unsigned int count)
 {
        struct uart_txx9_port *up = &serial_txx9_ports[co->index];
        unsigned int ier, flcr;
-       int i;
 
        /*
         *      First save the UER then disable the interrupts
@@ -888,22 +892,7 @@ serial_txx9_console_write(struct console *co, const char *s, unsigned int count)
        if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES))
                sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES);
 
-       /*
-        *      Now, do each character
-        */
-       for (i = 0; i < count; i++, s++) {
-               wait_for_xmitr(up);
-
-               /*
-                *      Send the character out.
-                *      If a LF, also do CR...
-                */
-               sio_out(up, TXX9_SITFIFO, *s);
-               if (*s == 10) {
-                       wait_for_xmitr(up);
-                       sio_out(up, TXX9_SITFIFO, 13);
-               }
-       }
+       uart_console_write(&up->port, s, count, serial_txx9_console_putchar);
 
        /*
         *      Finally, wait for transmitter to become empty
@@ -979,7 +968,6 @@ console_initcall(serial_txx9_console_init);
 static struct uart_driver serial_txx9_reg = {
        .owner                  = THIS_MODULE,
        .driver_name            = "serial_txx9",
-       .devfs_name             = TXX9_TTY_DEVFS_NAME,
        .dev_name               = TXX9_TTY_NAME,
        .major                  = TXX9_TTY_MAJOR,
        .minor                  = TXX9_TTY_MINOR_START,