#include "core.h"
#include "hcd.h"
-#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
-/**
- * dwc2_backup_host_registers() - Backup controller host registers.
- * When suspending usb bus, registers needs to be backuped
- * if controller power is disabled once suspended.
- *
- * @hsotg: Programming view of the DWC_otg controller
- */
-static int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg)
-{
- struct dwc2_hregs_backup *hr;
- int i;
-
- dev_dbg(hsotg->dev, "%s\n", __func__);
-
- /* Backup Host regs */
- hr = &hsotg->hr_backup;
- hr->hcfg = dwc2_readl(hsotg->regs + HCFG);
- hr->haintmsk = dwc2_readl(hsotg->regs + HAINTMSK);
- for (i = 0; i < hsotg->core_params->host_channels; ++i)
- hr->hcintmsk[i] = dwc2_readl(hsotg->regs + HCINTMSK(i));
-
- hr->hprt0 = dwc2_read_hprt0(hsotg);
- hr->hfir = dwc2_readl(hsotg->regs + HFIR);
- hr->valid = true;
-
- return 0;
-}
-
-/**
- * dwc2_restore_host_registers() - Restore controller host registers.
- * When resuming usb bus, device registers needs to be restored
- * if controller power were disabled.
- *
- * @hsotg: Programming view of the DWC_otg controller
- */
-static int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg)
-{
- struct dwc2_hregs_backup *hr;
- int i;
-
- dev_dbg(hsotg->dev, "%s\n", __func__);
-
- /* Restore host regs */
- hr = &hsotg->hr_backup;
- if (!hr->valid) {
- dev_err(hsotg->dev, "%s: no host registers to restore\n",
- __func__);
- return -EINVAL;
- }
- hr->valid = false;
-
- dwc2_writel(hr->hcfg, hsotg->regs + HCFG);
- dwc2_writel(hr->haintmsk, hsotg->regs + HAINTMSK);
-
- for (i = 0; i < hsotg->core_params->host_channels; ++i)
- dwc2_writel(hr->hcintmsk[i], hsotg->regs + HCINTMSK(i));
-
- dwc2_writel(hr->hprt0, hsotg->regs + HPRT0);
- dwc2_writel(hr->hfir, hsotg->regs + HFIR);
- hsotg->frame_number = 0;
-
- return 0;
-}
-#else
-static inline int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg)
-{ return 0; }
-
-static inline int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg)
-{ return 0; }
-#endif
-
-#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
- IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
-/**
- * dwc2_backup_device_registers() - Backup controller device registers.
- * When suspending usb bus, registers needs to be backuped
- * if controller power is disabled once suspended.
- *
- * @hsotg: Programming view of the DWC_otg controller
- */
-static int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg)
-{
- struct dwc2_dregs_backup *dr;
- int i;
-
- dev_dbg(hsotg->dev, "%s\n", __func__);
-
- /* Backup dev regs */
- dr = &hsotg->dr_backup;
-
- dr->dcfg = dwc2_readl(hsotg->regs + DCFG);
- dr->dctl = dwc2_readl(hsotg->regs + DCTL);
- dr->daintmsk = dwc2_readl(hsotg->regs + DAINTMSK);
- dr->diepmsk = dwc2_readl(hsotg->regs + DIEPMSK);
- dr->doepmsk = dwc2_readl(hsotg->regs + DOEPMSK);
-
- for (i = 0; i < hsotg->num_of_eps; i++) {
- /* Backup IN EPs */
- dr->diepctl[i] = dwc2_readl(hsotg->regs + DIEPCTL(i));
-
- /* Ensure DATA PID is correctly configured */
- if (dr->diepctl[i] & DXEPCTL_DPID)
- dr->diepctl[i] |= DXEPCTL_SETD1PID;
- else
- dr->diepctl[i] |= DXEPCTL_SETD0PID;
-
- dr->dieptsiz[i] = dwc2_readl(hsotg->regs + DIEPTSIZ(i));
- dr->diepdma[i] = dwc2_readl(hsotg->regs + DIEPDMA(i));
-
- /* Backup OUT EPs */
- dr->doepctl[i] = dwc2_readl(hsotg->regs + DOEPCTL(i));
-
- /* Ensure DATA PID is correctly configured */
- if (dr->doepctl[i] & DXEPCTL_DPID)
- dr->doepctl[i] |= DXEPCTL_SETD1PID;
- else
- dr->doepctl[i] |= DXEPCTL_SETD0PID;
-
- dr->doeptsiz[i] = dwc2_readl(hsotg->regs + DOEPTSIZ(i));
- dr->doepdma[i] = dwc2_readl(hsotg->regs + DOEPDMA(i));
- }
- dr->valid = true;
- return 0;
-}
-
-/**
- * dwc2_restore_device_registers() - Restore controller device registers.
- * When resuming usb bus, device registers needs to be restored
- * if controller power were disabled.
- *
- * @hsotg: Programming view of the DWC_otg controller
- */
-static int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg)
-{
- struct dwc2_dregs_backup *dr;
- u32 dctl;
- int i;
-
- dev_dbg(hsotg->dev, "%s\n", __func__);
-
- /* Restore dev regs */
- dr = &hsotg->dr_backup;
- if (!dr->valid) {
- dev_err(hsotg->dev, "%s: no device registers to restore\n",
- __func__);
- return -EINVAL;
- }
- dr->valid = false;
-
- dwc2_writel(dr->dcfg, hsotg->regs + DCFG);
- dwc2_writel(dr->dctl, hsotg->regs + DCTL);
- dwc2_writel(dr->daintmsk, hsotg->regs + DAINTMSK);
- dwc2_writel(dr->diepmsk, hsotg->regs + DIEPMSK);
- dwc2_writel(dr->doepmsk, hsotg->regs + DOEPMSK);
-
- for (i = 0; i < hsotg->num_of_eps; i++) {
- /* Restore IN EPs */
- dwc2_writel(dr->diepctl[i], hsotg->regs + DIEPCTL(i));
- dwc2_writel(dr->dieptsiz[i], hsotg->regs + DIEPTSIZ(i));
- dwc2_writel(dr->diepdma[i], hsotg->regs + DIEPDMA(i));
-
- /* Restore OUT EPs */
- dwc2_writel(dr->doepctl[i], hsotg->regs + DOEPCTL(i));
- dwc2_writel(dr->doeptsiz[i], hsotg->regs + DOEPTSIZ(i));
- dwc2_writel(dr->doepdma[i], hsotg->regs + DOEPDMA(i));
- }
-
- /* Set the Power-On Programming done bit */
- dctl = dwc2_readl(hsotg->regs + DCTL);
- dctl |= DCTL_PWRONPRGDONE;
- dwc2_writel(dctl, hsotg->regs + DCTL);
-
- return 0;
-}
-#else
-static inline int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg)
-{ return 0; }
-
-static inline int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg)
-{ return 0; }
-#endif
-
/**
* dwc2_backup_global_registers() - Backup global controller registers.
* When suspending usb bus, registers needs to be backuped
* @hsotg: Programming view of the DWC_otg controller
* @restore: Controller registers need to be restored
*/
-int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, bool restore)
-{
- u32 pcgcctl;
- int ret = 0;
-
- if (!hsotg->core_params->hibernation)
- return -ENOTSUPP;
-
- pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
- pcgcctl &= ~PCGCTL_STOPPCLK;
- dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
-
- pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
- pcgcctl &= ~PCGCTL_PWRCLMP;
- dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
-
- pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
- pcgcctl &= ~PCGCTL_RSTPDWNMODULE;
- dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
-
- udelay(100);
- if (restore) {
- ret = dwc2_restore_global_registers(hsotg);
- if (ret) {
- dev_err(hsotg->dev, "%s: failed to restore registers\n",
- __func__);
- return ret;
- }
- if (dwc2_is_host_mode(hsotg)) {
- ret = dwc2_restore_host_registers(hsotg);
- if (ret) {
- dev_err(hsotg->dev, "%s: failed to restore host registers\n",
- __func__);
- return ret;
- }
- } else {
- ret = dwc2_restore_device_registers(hsotg);
- if (ret) {
- dev_err(hsotg->dev, "%s: failed to restore device registers\n",
- __func__);
- return ret;
- }
- }
- }
-
- return ret;
-}
-
-/**
- * dwc2_enter_hibernation() - Put controller in Partial Power Down.
- *
- * @hsotg: Programming view of the DWC_otg controller
- */
-int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg)
-{
- u32 pcgcctl;
- int ret = 0;
-
- if (!hsotg->core_params->hibernation)
- return -ENOTSUPP;
-
- /* Backup all registers */
- ret = dwc2_backup_global_registers(hsotg);
- if (ret) {
- dev_err(hsotg->dev, "%s: failed to backup global registers\n",
- __func__);
- return ret;
- }
-
- if (dwc2_is_host_mode(hsotg)) {
- ret = dwc2_backup_host_registers(hsotg);
- if (ret) {
- dev_err(hsotg->dev, "%s: failed to backup host registers\n",
- __func__);
- return ret;
- }
- } else {
- ret = dwc2_backup_device_registers(hsotg);
- if (ret) {
- dev_err(hsotg->dev, "%s: failed to backup device registers\n",
- __func__);
- return ret;
- }
- }
-
- /*
- * Clear any pending interrupts since dwc2 will not be able to
- * clear them after entering hibernation.
- */
- dwc2_writel(0xffffffff, hsotg->regs + GINTSTS);
-
- /* Put the controller in low power state */
- pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
-
- pcgcctl |= PCGCTL_PWRCLMP;
- dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
- ndelay(20);
-
- pcgcctl |= PCGCTL_RSTPDWNMODULE;
- dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
- ndelay(20);
-
- pcgcctl |= PCGCTL_STOPPCLK;
- dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
-
- return ret;
-}
-
-/**
- * dwc2_enable_common_interrupts() - Initializes the commmon interrupts,
- * used in both device and host modes
- *
- * @hsotg: Programming view of the DWC_otg controller
- */
-static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg)
-{
- u32 intmsk;
-
- /* Clear any pending OTG Interrupts */
- dwc2_writel(0xffffffff, hsotg->regs + GOTGINT);
-
- /* Clear any pending interrupts */
- dwc2_writel(0xffffffff, hsotg->regs + GINTSTS);
-
- /* Enable the interrupts in the GINTMSK */
- intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT;
-
- if (hsotg->core_params->dma_enable <= 0)
- intmsk |= GINTSTS_RXFLVL;
- if (hsotg->core_params->external_id_pin_ctl <= 0)
- intmsk |= GINTSTS_CONIDSTSCHNG;
-
- intmsk |= GINTSTS_WKUPINT | GINTSTS_USBSUSP |
- GINTSTS_SESSREQINT;
-
- dwc2_writel(intmsk, hsotg->regs + GINTMSK);
-}
-
-/*
- * Initializes the FSLSPClkSel field of the HCFG register depending on the
- * PHY type
- */
-static void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
-{
- u32 hcfg, val;
-
- if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
- hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
- hsotg->core_params->ulpi_fs_ls > 0) ||
- hsotg->core_params->phy_type == DWC2_PHY_TYPE_PARAM_FS) {
- /* Full speed PHY */
- val = HCFG_FSLSPCLKSEL_48_MHZ;
- } else {
- /* High speed PHY running at full speed or high speed */
- val = HCFG_FSLSPCLKSEL_30_60_MHZ;
- }
-
- dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
- hcfg = dwc2_readl(hsotg->regs + HCFG);
- hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
- hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
- dwc2_writel(hcfg, hsotg->regs + HCFG);
-}
-
-/*
- * Do core a soft reset of the core. Be careful with this because it
- * resets all the internal state machines of the core.
- */
-int dwc2_core_reset(struct dwc2_hsotg *hsotg)
-{
- u32 greset;
- int count = 0;
-
- dev_vdbg(hsotg->dev, "%s()\n", __func__);
-
- /* Core Soft Reset */
- greset = dwc2_readl(hsotg->regs + GRSTCTL);
- greset |= GRSTCTL_CSFTRST;
- dwc2_writel(greset, hsotg->regs + GRSTCTL);
- do {
- udelay(1);
- greset = dwc2_readl(hsotg->regs + GRSTCTL);
- if (++count > 50) {
- dev_warn(hsotg->dev,
- "%s() HANG! Soft Reset GRSTCTL=%0x\n",
- __func__, greset);
- return -EBUSY;
- }
- } while (greset & GRSTCTL_CSFTRST);
-
- /* Wait for AHB master IDLE state */
- count = 0;
- do {
- udelay(1);
- greset = dwc2_readl(hsotg->regs + GRSTCTL);
- if (++count > 50) {
- dev_warn(hsotg->dev,
- "%s() HANG! AHB Idle GRSTCTL=%0x\n",
- __func__, greset);
- return -EBUSY;
- }
- } while (!(greset & GRSTCTL_AHBIDLE));
-
- return 0;
-}
-
-/*
- * Force the mode of the controller.
- *
- * Forcing the mode is needed for two cases:
- *
- * 1) If the dr_mode is set to either HOST or PERIPHERAL we force the
- * controller to stay in a particular mode regardless of ID pin
- * changes. We do this usually after a core reset.
- *
- * 2) During probe we want to read reset values of the hw
- * configuration registers that are only available in either host or
- * device mode. We may need to force the mode if the current mode does
- * not allow us to access the register in the mode that we want.
- *
- * In either case it only makes sense to force the mode if the
- * controller hardware is OTG capable.
- *
- * Checks are done in this function to determine whether doing a force
- * would be valid or not.
- *
- * If a force is done, it requires a 25ms delay to take effect.
- *
- * Returns true if the mode was forced.
- */
-static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
-{
- u32 gusbcfg;
- u32 set;
- u32 clear;
-
- dev_dbg(hsotg->dev, "Forcing mode to %s\n", host ? "host" : "device");
-
- /*
- * Force mode has no effect if the hardware is not OTG.
- */
- if (!dwc2_hw_is_otg(hsotg))
- return false;
-
- /*
- * If dr_mode is either peripheral or host only, there is no
- * need to ever force the mode to the opposite mode.
- */
- if (WARN_ON(host && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
- return false;
-
- if (WARN_ON(!host && hsotg->dr_mode == USB_DR_MODE_HOST))
- return false;
-
- gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
-
- set = host ? GUSBCFG_FORCEHOSTMODE : GUSBCFG_FORCEDEVMODE;
- clear = host ? GUSBCFG_FORCEDEVMODE : GUSBCFG_FORCEHOSTMODE;
-
- gusbcfg &= ~clear;
- gusbcfg |= set;
- dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
-
- msleep(25);
- return true;
-}
-
-/*
- * Clears the force mode bits.
- */
-static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
-{
- u32 gusbcfg;
-
- gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
- gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
- dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
-
- /*
- * NOTE: This long sleep is _very_ important, otherwise the core will
- * not stay in host mode after a connector ID change!
- */
- msleep(25);
-}
-
-/*
- * Sets or clears force mode based on the dr_mode parameter.
- */
-void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
-{
- switch (hsotg->dr_mode) {
- case USB_DR_MODE_HOST:
- dwc2_force_mode(hsotg, true);
- break;
- case USB_DR_MODE_PERIPHERAL:
- dwc2_force_mode(hsotg, false);
- break;
- case USB_DR_MODE_OTG:
- dwc2_clear_force_mode(hsotg);
- break;
- default:
- dev_warn(hsotg->dev, "%s() Invalid dr_mode=%d\n",
- __func__, hsotg->dr_mode);
- break;
- }
-}
-
-/*
- * Do core a soft reset of the core. Be careful with this because it
- * resets all the internal state machines of the core.
- *
- * Additionally this will apply force mode as per the hsotg->dr_mode
- * parameter.
- */
-int dwc2_core_reset_and_force_dr_mode(struct dwc2_hsotg *hsotg)
-{
- int retval;
-
- retval = dwc2_core_reset(hsotg);
- if (retval)
- return retval;
-
- dwc2_force_dr_mode(hsotg);
- return 0;
-}
-
-static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
-{
- u32 usbcfg, i2cctl;
- int retval = 0;
-
- /*
- * core_init() is now called on every switch so only call the
- * following for the first time through
- */
- if (select_phy) {
- dev_dbg(hsotg->dev, "FS PHY selected\n");
-
- usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- if (!(usbcfg & GUSBCFG_PHYSEL)) {
- usbcfg |= GUSBCFG_PHYSEL;
- dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
-
- /* Reset after a PHY select */
- retval = dwc2_core_reset_and_force_dr_mode(hsotg);
-
- if (retval) {
- dev_err(hsotg->dev,
- "%s: Reset failed, aborting", __func__);
- return retval;
- }
- }
- }
-
- /*
- * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
- * do this on HNP Dev/Host mode switches (done in dev_init and
- * host_init).
- */
- if (dwc2_is_host_mode(hsotg))
- dwc2_init_fs_ls_pclk_sel(hsotg);
-
- if (hsotg->core_params->i2c_enable > 0) {
- dev_dbg(hsotg->dev, "FS PHY enabling I2C\n");
-
- /* Program GUSBCFG.OtgUtmiFsSel to I2C */
- usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
- dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
-
- /* Program GI2CCTL.I2CEn */
- i2cctl = dwc2_readl(hsotg->regs + GI2CCTL);
- i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
- i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
- i2cctl &= ~GI2CCTL_I2CEN;
- dwc2_writel(i2cctl, hsotg->regs + GI2CCTL);
- i2cctl |= GI2CCTL_I2CEN;
- dwc2_writel(i2cctl, hsotg->regs + GI2CCTL);
- }
-
- return retval;
-}
-
-static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
-{
- u32 usbcfg, usbcfg_old;
- int retval = 0;
-
- if (!select_phy)
- return 0;
-
- usbcfg = usbcfg_old = dwc2_readl(hsotg->regs + GUSBCFG);
-
- /*
- * HS PHY parameters. These parameters are preserved during soft reset
- * so only program the first time. Do a soft reset immediately after
- * setting phyif.
- */
- switch (hsotg->core_params->phy_type) {
- case DWC2_PHY_TYPE_PARAM_ULPI:
- /* ULPI interface */
- dev_dbg(hsotg->dev, "HS ULPI PHY selected\n");
- usbcfg |= GUSBCFG_ULPI_UTMI_SEL;
- usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL);
- if (hsotg->core_params->phy_ulpi_ddr > 0)
- usbcfg |= GUSBCFG_DDRSEL;
- break;
- case DWC2_PHY_TYPE_PARAM_UTMI:
- /* UTMI+ interface */
- dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n");
- usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
- if (hsotg->core_params->phy_utmi_width == 16)
- usbcfg |= GUSBCFG_PHYIF16;
- break;
- default:
- dev_err(hsotg->dev, "FS PHY selected at HS!\n");
- break;
- }
-
- if (usbcfg != usbcfg_old) {
- dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
-
- /* Reset after setting the PHY parameters */
- retval = dwc2_core_reset_and_force_dr_mode(hsotg);
- if (retval) {
- dev_err(hsotg->dev,
- "%s: Reset failed, aborting", __func__);
- return retval;
- }
- }
-
- return retval;
-}
-
-static int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
-{
- u32 usbcfg;
- int retval = 0;
-
- if (hsotg->core_params->speed == DWC2_SPEED_PARAM_FULL &&
- hsotg->core_params->phy_type == DWC2_PHY_TYPE_PARAM_FS) {
- /* If FS mode with FS PHY */
- retval = dwc2_fs_phy_init(hsotg, select_phy);
- if (retval)
- return retval;
- } else {
- /* High speed PHY */
- retval = dwc2_hs_phy_init(hsotg, select_phy);
- if (retval)
- return retval;
- }
-
- if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
- hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
- hsotg->core_params->ulpi_fs_ls > 0) {
- dev_dbg(hsotg->dev, "Setting ULPI FSLS\n");
- usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- usbcfg |= GUSBCFG_ULPI_FS_LS;
- usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
- dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- } else {
- usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- usbcfg &= ~GUSBCFG_ULPI_FS_LS;
- usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
- dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- }
-
- return retval;
-}
-
-static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg)
-{
- u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
-
- switch (hsotg->hw_params.arch) {
- case GHWCFG2_EXT_DMA_ARCH:
- dev_err(hsotg->dev, "External DMA Mode not supported\n");
- return -EINVAL;
-
- case GHWCFG2_INT_DMA_ARCH:
- dev_dbg(hsotg->dev, "Internal DMA Mode\n");
- if (hsotg->core_params->ahbcfg != -1) {
- ahbcfg &= GAHBCFG_CTRL_MASK;
- ahbcfg |= hsotg->core_params->ahbcfg &
- ~GAHBCFG_CTRL_MASK;
- }
- break;
-
- case GHWCFG2_SLAVE_ONLY_ARCH:
- default:
- dev_dbg(hsotg->dev, "Slave Only Mode\n");
- break;
- }
-
- dev_dbg(hsotg->dev, "dma_enable:%d dma_desc_enable:%d\n",
- hsotg->core_params->dma_enable,
- hsotg->core_params->dma_desc_enable);
-
- if (hsotg->core_params->dma_enable > 0) {
- if (hsotg->core_params->dma_desc_enable > 0)
- dev_dbg(hsotg->dev, "Using Descriptor DMA mode\n");
- else
- dev_dbg(hsotg->dev, "Using Buffer DMA mode\n");
- } else {
- dev_dbg(hsotg->dev, "Using Slave mode\n");
- hsotg->core_params->dma_desc_enable = 0;
- }
-
- if (hsotg->core_params->dma_enable > 0)
- ahbcfg |= GAHBCFG_DMA_EN;
-
- dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG);
-
- return 0;
-}
-
-static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg)
-{
- u32 usbcfg;
-
- usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP);
-
- switch (hsotg->hw_params.op_mode) {
- case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
- if (hsotg->core_params->otg_cap ==
- DWC2_CAP_PARAM_HNP_SRP_CAPABLE)
- usbcfg |= GUSBCFG_HNPCAP;
- if (hsotg->core_params->otg_cap !=
- DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE)
- usbcfg |= GUSBCFG_SRPCAP;
- break;
-
- case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
- case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
- case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
- if (hsotg->core_params->otg_cap !=
- DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE)
- usbcfg |= GUSBCFG_SRPCAP;
- break;
-
- case GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE:
- case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE:
- case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST:
- default:
- break;
- }
-
- dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
-}
-
-/**
- * dwc2_core_init() - Initializes the DWC_otg controller registers and
- * prepares the core for device mode or host mode operation
- *
- * @hsotg: Programming view of the DWC_otg controller
- * @initial_setup: If true then this is the first init for this instance.
- */
-int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup)
-{
- u32 usbcfg, otgctl;
- int retval;
-
- dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
-
- usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
-
- /* Set ULPI External VBUS bit if needed */
- usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV;
- if (hsotg->core_params->phy_ulpi_ext_vbus ==
- DWC2_PHY_ULPI_EXTERNAL_VBUS)
- usbcfg |= GUSBCFG_ULPI_EXT_VBUS_DRV;
-
- /* Set external TS Dline pulsing bit if needed */
- usbcfg &= ~GUSBCFG_TERMSELDLPULSE;
- if (hsotg->core_params->ts_dline > 0)
- usbcfg |= GUSBCFG_TERMSELDLPULSE;
-
- dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
-
- /*
- * Reset the Controller
- *
- * We only need to reset the controller if this is a re-init.
- * For the first init we know for sure that earlier code reset us (it
- * needed to in order to properly detect various parameters).
- */
- if (!initial_setup) {
- retval = dwc2_core_reset_and_force_dr_mode(hsotg);
- if (retval) {
- dev_err(hsotg->dev, "%s(): Reset failed, aborting\n",
- __func__);
- return retval;
- }
- }
-
- /*
- * This needs to happen in FS mode before any other programming occurs
- */
- retval = dwc2_phy_init(hsotg, initial_setup);
- if (retval)
- return retval;
-
- /* Program the GAHBCFG Register */
- retval = dwc2_gahbcfg_init(hsotg);
- if (retval)
- return retval;
-
- /* Program the GUSBCFG register */
- dwc2_gusbcfg_init(hsotg);
-
- /* Program the GOTGCTL register */
- otgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- otgctl &= ~GOTGCTL_OTGVER;
- if (hsotg->core_params->otg_ver > 0)
- otgctl |= GOTGCTL_OTGVER;
- dwc2_writel(otgctl, hsotg->regs + GOTGCTL);
- dev_dbg(hsotg->dev, "OTG VER PARAM: %d\n", hsotg->core_params->otg_ver);
-
- /* Clear the SRP success bit for FS-I2c */
- hsotg->srp_success = 0;
-
- /* Enable common interrupts */
- dwc2_enable_common_interrupts(hsotg);
-
- /*
- * Do device or host initialization based on mode during PCD and
- * HCD initialization
- */
- if (dwc2_is_host_mode(hsotg)) {
- dev_dbg(hsotg->dev, "Host Mode\n");
- hsotg->op_state = OTG_STATE_A_HOST;
- } else {
- dev_dbg(hsotg->dev, "Device Mode\n");
- hsotg->op_state = OTG_STATE_B_PERIPHERAL;
- }
-
- return 0;
-}
-
-/**
- * dwc2_enable_host_interrupts() - Enables the Host mode interrupts
- *
- * @hsotg: Programming view of DWC_otg controller
- */
-void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg)
-{
- u32 intmsk;
-
- dev_dbg(hsotg->dev, "%s()\n", __func__);
-
- /* Disable all interrupts */
- dwc2_writel(0, hsotg->regs + GINTMSK);
- dwc2_writel(0, hsotg->regs + HAINTMSK);
-
- /* Enable the common interrupts */
- dwc2_enable_common_interrupts(hsotg);
-
- /* Enable host mode interrupts without disturbing common interrupts */
- intmsk = dwc2_readl(hsotg->regs + GINTMSK);
- intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT;
- dwc2_writel(intmsk, hsotg->regs + GINTMSK);
-}
-
-/**
- * dwc2_disable_host_interrupts() - Disables the Host Mode interrupts
- *
- * @hsotg: Programming view of DWC_otg controller
- */
-void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg)
-{
- u32 intmsk = dwc2_readl(hsotg->regs + GINTMSK);
-
- /* Disable host mode interrupts without disturbing common interrupts */
- intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT |
- GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP | GINTSTS_DISCONNINT);
- dwc2_writel(intmsk, hsotg->regs + GINTMSK);
-}
-
-/*
- * dwc2_calculate_dynamic_fifo() - Calculates the default fifo size
- * For system that have a total fifo depth that is smaller than the default
- * RX + TX fifo size.
- *
- * @hsotg: Programming view of DWC_otg controller
- */
-static void dwc2_calculate_dynamic_fifo(struct dwc2_hsotg *hsotg)
-{
- struct dwc2_core_params *params = hsotg->core_params;
- struct dwc2_hw_params *hw = &hsotg->hw_params;
- u32 rxfsiz, nptxfsiz, ptxfsiz, total_fifo_size;
-
- total_fifo_size = hw->total_fifo_size;
- rxfsiz = params->host_rx_fifo_size;
- nptxfsiz = params->host_nperio_tx_fifo_size;
- ptxfsiz = params->host_perio_tx_fifo_size;
-
- /*
- * Will use Method 2 defined in the DWC2 spec: minimum FIFO depth
- * allocation with support for high bandwidth endpoints. Synopsys
- * defines MPS(Max Packet size) for a periodic EP=1024, and for
- * non-periodic as 512.
- */
- if (total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)) {
- /*
- * For Buffer DMA mode/Scatter Gather DMA mode
- * 2 * ((Largest Packet size / 4) + 1 + 1) + n
- * with n = number of host channel.
- * 2 * ((1024/4) + 2) = 516
- */
- rxfsiz = 516 + hw->host_channels;
-
- /*
- * min non-periodic tx fifo depth
- * 2 * (largest non-periodic USB packet used / 4)
- * 2 * (512/4) = 256
- */
- nptxfsiz = 256;
-
- /*
- * min periodic tx fifo depth
- * (largest packet size*MC)/4
- * (1024 * 3)/4 = 768
- */
- ptxfsiz = 768;
-
- params->host_rx_fifo_size = rxfsiz;
- params->host_nperio_tx_fifo_size = nptxfsiz;
- params->host_perio_tx_fifo_size = ptxfsiz;
- }
-
- /*
- * If the summation of RX, NPTX and PTX fifo sizes is still
- * bigger than the total_fifo_size, then we have a problem.
- *
- * We won't be able to allocate as many endpoints. Right now,
- * we're just printing an error message, but ideally this FIFO
- * allocation algorithm would be improved in the future.
- *
- * FIXME improve this FIFO allocation algorithm.
- */
- if (unlikely(total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)))
- dev_err(hsotg->dev, "invalid fifo sizes\n");
-}
-
-static void dwc2_config_fifos(struct dwc2_hsotg *hsotg)
-{
- struct dwc2_core_params *params = hsotg->core_params;
- u32 nptxfsiz, hptxfsiz, dfifocfg, grxfsiz;
-
- if (!params->enable_dynamic_fifo)
- return;
-
- dwc2_calculate_dynamic_fifo(hsotg);
-
- /* Rx FIFO */
- grxfsiz = dwc2_readl(hsotg->regs + GRXFSIZ);
- dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz);
- grxfsiz &= ~GRXFSIZ_DEPTH_MASK;
- grxfsiz |= params->host_rx_fifo_size <<
- GRXFSIZ_DEPTH_SHIFT & GRXFSIZ_DEPTH_MASK;
- dwc2_writel(grxfsiz, hsotg->regs + GRXFSIZ);
- dev_dbg(hsotg->dev, "new grxfsiz=%08x\n",
- dwc2_readl(hsotg->regs + GRXFSIZ));
-
- /* Non-periodic Tx FIFO */
- dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n",
- dwc2_readl(hsotg->regs + GNPTXFSIZ));
- nptxfsiz = params->host_nperio_tx_fifo_size <<
- FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
- nptxfsiz |= params->host_rx_fifo_size <<
- FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
- dwc2_writel(nptxfsiz, hsotg->regs + GNPTXFSIZ);
- dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n",
- dwc2_readl(hsotg->regs + GNPTXFSIZ));
-
- /* Periodic Tx FIFO */
- dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n",
- dwc2_readl(hsotg->regs + HPTXFSIZ));
- hptxfsiz = params->host_perio_tx_fifo_size <<
- FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
- hptxfsiz |= (params->host_rx_fifo_size +
- params->host_nperio_tx_fifo_size) <<
- FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
- dwc2_writel(hptxfsiz, hsotg->regs + HPTXFSIZ);
- dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n",
- dwc2_readl(hsotg->regs + HPTXFSIZ));
-
- if (hsotg->core_params->en_multiple_tx_fifo > 0 &&
- hsotg->hw_params.snpsid <= DWC2_CORE_REV_2_94a) {
- /*
- * Global DFIFOCFG calculation for Host mode -
- * include RxFIFO, NPTXFIFO and HPTXFIFO
- */
- dfifocfg = dwc2_readl(hsotg->regs + GDFIFOCFG);
- dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK;
- dfifocfg |= (params->host_rx_fifo_size +
- params->host_nperio_tx_fifo_size +
- params->host_perio_tx_fifo_size) <<
- GDFIFOCFG_EPINFOBASE_SHIFT &
- GDFIFOCFG_EPINFOBASE_MASK;
- dwc2_writel(dfifocfg, hsotg->regs + GDFIFOCFG);
- }
-}
-
-/**
- * dwc2_core_host_init() - Initializes the DWC_otg controller registers for
- * Host mode
- *
- * @hsotg: Programming view of DWC_otg controller
- *
- * This function flushes the Tx and Rx FIFOs and flushes any entries in the
- * request queues. Host channels are reset to ensure that they are ready for
- * performing transfers.
- */
-void dwc2_core_host_init(struct dwc2_hsotg *hsotg)
-{
- u32 hcfg, hfir, otgctl;
-
- dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
-
- /* Restart the Phy Clock */
- dwc2_writel(0, hsotg->regs + PCGCTL);
-
- /* Initialize Host Configuration Register */
- dwc2_init_fs_ls_pclk_sel(hsotg);
- if (hsotg->core_params->speed == DWC2_SPEED_PARAM_FULL) {
- hcfg = dwc2_readl(hsotg->regs + HCFG);
- hcfg |= HCFG_FSLSSUPP;
- dwc2_writel(hcfg, hsotg->regs + HCFG);
- }
-
- /*
- * This bit allows dynamic reloading of the HFIR register during
- * runtime. This bit needs to be programmed during initial configuration
- * and its value must not be changed during runtime.
- */
- if (hsotg->core_params->reload_ctl > 0) {
- hfir = dwc2_readl(hsotg->regs + HFIR);
- hfir |= HFIR_RLDCTRL;
- dwc2_writel(hfir, hsotg->regs + HFIR);
- }
-
- if (hsotg->core_params->dma_desc_enable > 0) {
- u32 op_mode = hsotg->hw_params.op_mode;
- if (hsotg->hw_params.snpsid < DWC2_CORE_REV_2_90a ||
- !hsotg->hw_params.dma_desc_enable ||
- op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE ||
- op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE ||
- op_mode == GHWCFG2_OP_MODE_UNDEFINED) {
- dev_err(hsotg->dev,
- "Hardware does not support descriptor DMA mode -\n");
- dev_err(hsotg->dev,
- "falling back to buffer DMA mode.\n");
- hsotg->core_params->dma_desc_enable = 0;
- } else {
- hcfg = dwc2_readl(hsotg->regs + HCFG);
- hcfg |= HCFG_DESCDMA;
- dwc2_writel(hcfg, hsotg->regs + HCFG);
- }
- }
-
- /* Configure data FIFO sizes */
- dwc2_config_fifos(hsotg);
-
- /* TODO - check this */
- /* Clear Host Set HNP Enable in the OTG Control Register */
- otgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- otgctl &= ~GOTGCTL_HSTSETHNPEN;
- dwc2_writel(otgctl, hsotg->regs + GOTGCTL);
-
- /* Make sure the FIFOs are flushed */
- dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */);
- dwc2_flush_rx_fifo(hsotg);
-
- /* Clear Host Set HNP Enable in the OTG Control Register */
- otgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- otgctl &= ~GOTGCTL_HSTSETHNPEN;
- dwc2_writel(otgctl, hsotg->regs + GOTGCTL);
-
- if (hsotg->core_params->dma_desc_enable <= 0) {
- int num_channels, i;
- u32 hcchar;
-
- /* Flush out any leftover queued requests */
- num_channels = hsotg->core_params->host_channels;
- for (i = 0; i < num_channels; i++) {
- hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
- hcchar &= ~HCCHAR_CHENA;
- hcchar |= HCCHAR_CHDIS;
- hcchar &= ~HCCHAR_EPDIR;
- dwc2_writel(hcchar, hsotg->regs + HCCHAR(i));
- }
-
- /* Halt all channels to put them into a known state */
- for (i = 0; i < num_channels; i++) {
- int count = 0;
-
- hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
- hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS;
- hcchar &= ~HCCHAR_EPDIR;
- dwc2_writel(hcchar, hsotg->regs + HCCHAR(i));
- dev_dbg(hsotg->dev, "%s: Halt channel %d\n",
- __func__, i);
- do {
- hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
- if (++count > 1000) {
- dev_err(hsotg->dev,
- "Unable to clear enable on channel %d\n",
- i);
- break;
- }
- udelay(1);
- } while (hcchar & HCCHAR_CHENA);
- }
- }
-
- /* Turn on the vbus power */
- dev_dbg(hsotg->dev, "Init: Port Power? op_state=%d\n", hsotg->op_state);
- if (hsotg->op_state == OTG_STATE_A_HOST) {
- u32 hprt0 = dwc2_read_hprt0(hsotg);
-
- dev_dbg(hsotg->dev, "Init: Power Port (%d)\n",
- !!(hprt0 & HPRT0_PWR));
- if (!(hprt0 & HPRT0_PWR)) {
- hprt0 |= HPRT0_PWR;
- dwc2_writel(hprt0, hsotg->regs + HPRT0);
- }
- }
-
- dwc2_enable_host_interrupts(hsotg);
-}
-
-static void dwc2_hc_enable_slave_ints(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan)
-{
- u32 hcintmsk = HCINTMSK_CHHLTD;
-
- switch (chan->ep_type) {
- case USB_ENDPOINT_XFER_CONTROL:
- case USB_ENDPOINT_XFER_BULK:
- dev_vdbg(hsotg->dev, "control/bulk\n");
- hcintmsk |= HCINTMSK_XFERCOMPL;
- hcintmsk |= HCINTMSK_STALL;
- hcintmsk |= HCINTMSK_XACTERR;
- hcintmsk |= HCINTMSK_DATATGLERR;
- if (chan->ep_is_in) {
- hcintmsk |= HCINTMSK_BBLERR;
- } else {
- hcintmsk |= HCINTMSK_NAK;
- hcintmsk |= HCINTMSK_NYET;
- if (chan->do_ping)
- hcintmsk |= HCINTMSK_ACK;
- }
-
- if (chan->do_split) {
- hcintmsk |= HCINTMSK_NAK;
- if (chan->complete_split)
- hcintmsk |= HCINTMSK_NYET;
- else
- hcintmsk |= HCINTMSK_ACK;
- }
-
- if (chan->error_state)
- hcintmsk |= HCINTMSK_ACK;
- break;
-
- case USB_ENDPOINT_XFER_INT:
- if (dbg_perio())
- dev_vdbg(hsotg->dev, "intr\n");
- hcintmsk |= HCINTMSK_XFERCOMPL;
- hcintmsk |= HCINTMSK_NAK;
- hcintmsk |= HCINTMSK_STALL;
- hcintmsk |= HCINTMSK_XACTERR;
- hcintmsk |= HCINTMSK_DATATGLERR;
- hcintmsk |= HCINTMSK_FRMOVRUN;
-
- if (chan->ep_is_in)
- hcintmsk |= HCINTMSK_BBLERR;
- if (chan->error_state)
- hcintmsk |= HCINTMSK_ACK;
- if (chan->do_split) {
- if (chan->complete_split)
- hcintmsk |= HCINTMSK_NYET;
- else
- hcintmsk |= HCINTMSK_ACK;
- }
- break;
-
- case USB_ENDPOINT_XFER_ISOC:
- if (dbg_perio())
- dev_vdbg(hsotg->dev, "isoc\n");
- hcintmsk |= HCINTMSK_XFERCOMPL;
- hcintmsk |= HCINTMSK_FRMOVRUN;
- hcintmsk |= HCINTMSK_ACK;
-
- if (chan->ep_is_in) {
- hcintmsk |= HCINTMSK_XACTERR;
- hcintmsk |= HCINTMSK_BBLERR;
- }
- break;
- default:
- dev_err(hsotg->dev, "## Unknown EP type ##\n");
- break;
- }
-
- dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
-}
-
-static void dwc2_hc_enable_dma_ints(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan)
-{
- u32 hcintmsk = HCINTMSK_CHHLTD;
-
- /*
- * For Descriptor DMA mode core halts the channel on AHB error.
- * Interrupt is not required.
- */
- if (hsotg->core_params->dma_desc_enable <= 0) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "desc DMA disabled\n");
- hcintmsk |= HCINTMSK_AHBERR;
- } else {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "desc DMA enabled\n");
- if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
- hcintmsk |= HCINTMSK_XFERCOMPL;
- }
-
- if (chan->error_state && !chan->do_split &&
- chan->ep_type != USB_ENDPOINT_XFER_ISOC) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "setting ACK\n");
- hcintmsk |= HCINTMSK_ACK;
- if (chan->ep_is_in) {
- hcintmsk |= HCINTMSK_DATATGLERR;
- if (chan->ep_type != USB_ENDPOINT_XFER_INT)
- hcintmsk |= HCINTMSK_NAK;
- }
- }
-
- dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
-}
-
-static void dwc2_hc_enable_ints(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan)
-{
- u32 intmsk;
-
- if (hsotg->core_params->dma_enable > 0) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "DMA enabled\n");
- dwc2_hc_enable_dma_ints(hsotg, chan);
- } else {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "DMA disabled\n");
- dwc2_hc_enable_slave_ints(hsotg, chan);
- }
-
- /* Enable the top level host channel interrupt */
- intmsk = dwc2_readl(hsotg->regs + HAINTMSK);
- intmsk |= 1 << chan->hc_num;
- dwc2_writel(intmsk, hsotg->regs + HAINTMSK);
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk);
-
- /* Make sure host channel interrupts are enabled */
- intmsk = dwc2_readl(hsotg->regs + GINTMSK);
- intmsk |= GINTSTS_HCHINT;
- dwc2_writel(intmsk, hsotg->regs + GINTMSK);
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk);
-}
-
-/**
- * dwc2_hc_init() - Prepares a host channel for transferring packets to/from
- * a specific endpoint
- *
- * @hsotg: Programming view of DWC_otg controller
- * @chan: Information needed to initialize the host channel
- *
- * The HCCHARn register is set up with the characteristics specified in chan.
- * Host channel interrupts that may need to be serviced while this transfer is
- * in progress are enabled.
- */
-void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
-{
- u8 hc_num = chan->hc_num;
- u32 hcintmsk;
- u32 hcchar;
- u32 hcsplt = 0;
-
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "%s()\n", __func__);
-
- /* Clear old interrupt conditions for this host channel */
- hcintmsk = 0xffffffff;
- hcintmsk &= ~HCINTMSK_RESERVED14_31;
- dwc2_writel(hcintmsk, hsotg->regs + HCINT(hc_num));
-
- /* Enable channel interrupts required for this transfer */
- dwc2_hc_enable_ints(hsotg, chan);
-
- /*
- * Program the HCCHARn register with the endpoint characteristics for
- * the current transfer
- */
- hcchar = chan->dev_addr << HCCHAR_DEVADDR_SHIFT & HCCHAR_DEVADDR_MASK;
- hcchar |= chan->ep_num << HCCHAR_EPNUM_SHIFT & HCCHAR_EPNUM_MASK;
- if (chan->ep_is_in)
- hcchar |= HCCHAR_EPDIR;
- if (chan->speed == USB_SPEED_LOW)
- hcchar |= HCCHAR_LSPDDEV;
- hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK;
- hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK;
- dwc2_writel(hcchar, hsotg->regs + HCCHAR(hc_num));
- if (dbg_hc(chan)) {
- dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n",
- hc_num, hcchar);
-
- dev_vdbg(hsotg->dev, "%s: Channel %d\n",
- __func__, hc_num);
- dev_vdbg(hsotg->dev, " Dev Addr: %d\n",
- chan->dev_addr);
- dev_vdbg(hsotg->dev, " Ep Num: %d\n",
- chan->ep_num);
- dev_vdbg(hsotg->dev, " Is In: %d\n",
- chan->ep_is_in);
- dev_vdbg(hsotg->dev, " Is Low Speed: %d\n",
- chan->speed == USB_SPEED_LOW);
- dev_vdbg(hsotg->dev, " Ep Type: %d\n",
- chan->ep_type);
- dev_vdbg(hsotg->dev, " Max Pkt: %d\n",
- chan->max_packet);
- }
-
- /* Program the HCSPLT register for SPLITs */
- if (chan->do_split) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev,
- "Programming HC %d with split --> %s\n",
- hc_num,
- chan->complete_split ? "CSPLIT" : "SSPLIT");
- if (chan->complete_split)
- hcsplt |= HCSPLT_COMPSPLT;
- hcsplt |= chan->xact_pos << HCSPLT_XACTPOS_SHIFT &
- HCSPLT_XACTPOS_MASK;
- hcsplt |= chan->hub_addr << HCSPLT_HUBADDR_SHIFT &
- HCSPLT_HUBADDR_MASK;
- hcsplt |= chan->hub_port << HCSPLT_PRTADDR_SHIFT &
- HCSPLT_PRTADDR_MASK;
- if (dbg_hc(chan)) {
- dev_vdbg(hsotg->dev, " comp split %d\n",
- chan->complete_split);
- dev_vdbg(hsotg->dev, " xact pos %d\n",
- chan->xact_pos);
- dev_vdbg(hsotg->dev, " hub addr %d\n",
- chan->hub_addr);
- dev_vdbg(hsotg->dev, " hub port %d\n",
- chan->hub_port);
- dev_vdbg(hsotg->dev, " is_in %d\n",
- chan->ep_is_in);
- dev_vdbg(hsotg->dev, " Max Pkt %d\n",
- chan->max_packet);
- dev_vdbg(hsotg->dev, " xferlen %d\n",
- chan->xfer_len);
- }
- }
-
- dwc2_writel(hcsplt, hsotg->regs + HCSPLT(hc_num));
-}
-
-/**
- * dwc2_hc_halt() - Attempts to halt a host channel
- *
- * @hsotg: Controller register interface
- * @chan: Host channel to halt
- * @halt_status: Reason for halting the channel
- *
- * This function should only be called in Slave mode or to abort a transfer in
- * either Slave mode or DMA mode. Under normal circumstances in DMA mode, the
- * controller halts the channel when the transfer is complete or a condition
- * occurs that requires application intervention.
- *
- * In slave mode, checks for a free request queue entry, then sets the Channel
- * Enable and Channel Disable bits of the Host Channel Characteristics
- * register of the specified channel to intiate the halt. If there is no free
- * request queue entry, sets only the Channel Disable bit of the HCCHARn
- * register to flush requests for this channel. In the latter case, sets a
- * flag to indicate that the host channel needs to be halted when a request
- * queue slot is open.
- *
- * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
- * HCCHARn register. The controller ensures there is space in the request
- * queue before submitting the halt request.
- *
- * Some time may elapse before the core flushes any posted requests for this
- * host channel and halts. The Channel Halted interrupt handler completes the
- * deactivation of the host channel.
- */
-void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
- enum dwc2_halt_status halt_status)
-{
- u32 nptxsts, hptxsts, hcchar;
-
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "%s()\n", __func__);
- if (halt_status == DWC2_HC_XFER_NO_HALT_STATUS)
- dev_err(hsotg->dev, "!!! halt_status = %d !!!\n", halt_status);
-
- if (halt_status == DWC2_HC_XFER_URB_DEQUEUE ||
- halt_status == DWC2_HC_XFER_AHB_ERR) {
- /*
- * Disable all channel interrupts except Ch Halted. The QTD
- * and QH state associated with this transfer has been cleared
- * (in the case of URB_DEQUEUE), so the channel needs to be
- * shut down carefully to prevent crashes.
- */
- u32 hcintmsk = HCINTMSK_CHHLTD;
-
- dev_vdbg(hsotg->dev, "dequeue/error\n");
- dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
-
- /*
- * Make sure no other interrupts besides halt are currently
- * pending. Handling another interrupt could cause a crash due
- * to the QTD and QH state.
- */
- dwc2_writel(~hcintmsk, hsotg->regs + HCINT(chan->hc_num));
-
- /*
- * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
- * even if the channel was already halted for some other
- * reason
- */
- chan->halt_status = halt_status;
-
- hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- if (!(hcchar & HCCHAR_CHENA)) {
- /*
- * The channel is either already halted or it hasn't
- * started yet. In DMA mode, the transfer may halt if
- * it finishes normally or a condition occurs that
- * requires driver intervention. Don't want to halt
- * the channel again. In either Slave or DMA mode,
- * it's possible that the transfer has been assigned
- * to a channel, but not started yet when an URB is
- * dequeued. Don't want to halt a channel that hasn't
- * started yet.
- */
- return;
- }
- }
- if (chan->halt_pending) {
- /*
- * A halt has already been issued for this channel. This might
- * happen when a transfer is aborted by a higher level in
- * the stack.
- */
- dev_vdbg(hsotg->dev,
- "*** %s: Channel %d, chan->halt_pending already set ***\n",
- __func__, chan->hc_num);
- return;
- }
-
- hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
-
- /* No need to set the bit in DDMA for disabling the channel */
- /* TODO check it everywhere channel is disabled */
- if (hsotg->core_params->dma_desc_enable <= 0) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "desc DMA disabled\n");
- hcchar |= HCCHAR_CHENA;
- } else {
- if (dbg_hc(chan))
- dev_dbg(hsotg->dev, "desc DMA enabled\n");
- }
- hcchar |= HCCHAR_CHDIS;
-
- if (hsotg->core_params->dma_enable <= 0) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "DMA not enabled\n");
- hcchar |= HCCHAR_CHENA;
-
- /* Check for space in the request queue to issue the halt */
- if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
- chan->ep_type == USB_ENDPOINT_XFER_BULK) {
- dev_vdbg(hsotg->dev, "control/bulk\n");
- nptxsts = dwc2_readl(hsotg->regs + GNPTXSTS);
- if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) {
- dev_vdbg(hsotg->dev, "Disabling channel\n");
- hcchar &= ~HCCHAR_CHENA;
- }
- } else {
- if (dbg_perio())
- dev_vdbg(hsotg->dev, "isoc/intr\n");
- hptxsts = dwc2_readl(hsotg->regs + HPTXSTS);
- if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 ||
- hsotg->queuing_high_bandwidth) {
- if (dbg_perio())
- dev_vdbg(hsotg->dev, "Disabling channel\n");
- hcchar &= ~HCCHAR_CHENA;
- }
- }
- } else {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "DMA enabled\n");
- }
-
- dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- chan->halt_status = halt_status;
-
- if (hcchar & HCCHAR_CHENA) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "Channel enabled\n");
- chan->halt_pending = 1;
- chan->halt_on_queue = 0;
- } else {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "Channel disabled\n");
- chan->halt_on_queue = 1;
- }
-
- if (dbg_hc(chan)) {
- dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
- chan->hc_num);
- dev_vdbg(hsotg->dev, " hcchar: 0x%08x\n",
- hcchar);
- dev_vdbg(hsotg->dev, " halt_pending: %d\n",
- chan->halt_pending);
- dev_vdbg(hsotg->dev, " halt_on_queue: %d\n",
- chan->halt_on_queue);
- dev_vdbg(hsotg->dev, " halt_status: %d\n",
- chan->halt_status);
- }
-}
-
-/**
- * dwc2_hc_cleanup() - Clears the transfer state for a host channel
- *
- * @hsotg: Programming view of DWC_otg controller
- * @chan: Identifies the host channel to clean up
- *
- * This function is normally called after a transfer is done and the host
- * channel is being released
- */
-void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
-{
- u32 hcintmsk;
-
- chan->xfer_started = 0;
-
- /*
- * Clear channel interrupt enables and any unhandled channel interrupt
- * conditions
- */
- dwc2_writel(0, hsotg->regs + HCINTMSK(chan->hc_num));
- hcintmsk = 0xffffffff;
- hcintmsk &= ~HCINTMSK_RESERVED14_31;
- dwc2_writel(hcintmsk, hsotg->regs + HCINT(chan->hc_num));
-}
-
-/**
- * dwc2_hc_set_even_odd_frame() - Sets the channel property that indicates in
- * which frame a periodic transfer should occur
- *
- * @hsotg: Programming view of DWC_otg controller
- * @chan: Identifies the host channel to set up and its properties
- * @hcchar: Current value of the HCCHAR register for the specified host channel
- *
- * This function has no effect on non-periodic transfers
- */
-static void dwc2_hc_set_even_odd_frame(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan, u32 *hcchar)
-{
- if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
- chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
- /* 1 if _next_ frame is odd, 0 if it's even */
- if (!(dwc2_hcd_get_frame_number(hsotg) & 0x1))
- *hcchar |= HCCHAR_ODDFRM;
- }
-}
-
-static void dwc2_set_pid_isoc(struct dwc2_host_chan *chan)
-{
- /* Set up the initial PID for the transfer */
- if (chan->speed == USB_SPEED_HIGH) {
- if (chan->ep_is_in) {
- if (chan->multi_count == 1)
- chan->data_pid_start = DWC2_HC_PID_DATA0;
- else if (chan->multi_count == 2)
- chan->data_pid_start = DWC2_HC_PID_DATA1;
- else
- chan->data_pid_start = DWC2_HC_PID_DATA2;
- } else {
- if (chan->multi_count == 1)
- chan->data_pid_start = DWC2_HC_PID_DATA0;
- else
- chan->data_pid_start = DWC2_HC_PID_MDATA;
- }
- } else {
- chan->data_pid_start = DWC2_HC_PID_DATA0;
- }
-}
-
-/**
- * dwc2_hc_write_packet() - Writes a packet into the Tx FIFO associated with
- * the Host Channel
- *
- * @hsotg: Programming view of DWC_otg controller
- * @chan: Information needed to initialize the host channel
- *
- * This function should only be called in Slave mode. For a channel associated
- * with a non-periodic EP, the non-periodic Tx FIFO is written. For a channel
- * associated with a periodic EP, the periodic Tx FIFO is written.
- *
- * Upon return the xfer_buf and xfer_count fields in chan are incremented by
- * the number of bytes written to the Tx FIFO.
- */
-static void dwc2_hc_write_packet(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan)
-{
- u32 i;
- u32 remaining_count;
- u32 byte_count;
- u32 dword_count;
- u32 __iomem *data_fifo;
- u32 *data_buf = (u32 *)chan->xfer_buf;
-
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "%s()\n", __func__);
-
- data_fifo = (u32 __iomem *)(hsotg->regs + HCFIFO(chan->hc_num));
-
- remaining_count = chan->xfer_len - chan->xfer_count;
- if (remaining_count > chan->max_packet)
- byte_count = chan->max_packet;
- else
- byte_count = remaining_count;
-
- dword_count = (byte_count + 3) / 4;
-
- if (((unsigned long)data_buf & 0x3) == 0) {
- /* xfer_buf is DWORD aligned */
- for (i = 0; i < dword_count; i++, data_buf++)
- dwc2_writel(*data_buf, data_fifo);
- } else {
- /* xfer_buf is not DWORD aligned */
- for (i = 0; i < dword_count; i++, data_buf++) {
- u32 data = data_buf[0] | data_buf[1] << 8 |
- data_buf[2] << 16 | data_buf[3] << 24;
- dwc2_writel(data, data_fifo);
- }
- }
-
- chan->xfer_count += byte_count;
- chan->xfer_buf += byte_count;
-}
-
-/**
- * dwc2_hc_start_transfer() - Does the setup for a data transfer for a host
- * channel and starts the transfer
- *
- * @hsotg: Programming view of DWC_otg controller
- * @chan: Information needed to initialize the host channel. The xfer_len value
- * may be reduced to accommodate the max widths of the XferSize and
- * PktCnt fields in the HCTSIZn register. The multi_count value may be
- * changed to reflect the final xfer_len value.
- *
- * This function may be called in either Slave mode or DMA mode. In Slave mode,
- * the caller must ensure that there is sufficient space in the request queue
- * and Tx Data FIFO.
- *
- * For an OUT transfer in Slave mode, it loads a data packet into the
- * appropriate FIFO. If necessary, additional data packets are loaded in the
- * Host ISR.
- *
- * For an IN transfer in Slave mode, a data packet is requested. The data
- * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
- * additional data packets are requested in the Host ISR.
- *
- * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
- * register along with a packet count of 1 and the channel is enabled. This
- * causes a single PING transaction to occur. Other fields in HCTSIZ are
- * simply set to 0 since no data transfer occurs in this case.
- *
- * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
- * all the information required to perform the subsequent data transfer. In
- * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
- * controller performs the entire PING protocol, then starts the data
- * transfer.
- */
-void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan)
+int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, bool restore)
{
- u32 max_hc_xfer_size = hsotg->core_params->max_transfer_size;
- u16 max_hc_pkt_count = hsotg->core_params->max_packet_count;
- u32 hcchar;
- u32 hctsiz = 0;
- u16 num_packets;
- u32 ec_mc;
-
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "%s()\n", __func__);
-
- if (chan->do_ping) {
- if (hsotg->core_params->dma_enable <= 0) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "ping, no DMA\n");
- dwc2_hc_do_ping(hsotg, chan);
- chan->xfer_started = 1;
- return;
- } else {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "ping, DMA\n");
- hctsiz |= TSIZ_DOPNG;
- }
- }
-
- if (chan->do_split) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "split\n");
- num_packets = 1;
-
- if (chan->complete_split && !chan->ep_is_in)
- /*
- * For CSPLIT OUT Transfer, set the size to 0 so the
- * core doesn't expect any data written to the FIFO
- */
- chan->xfer_len = 0;
- else if (chan->ep_is_in || chan->xfer_len > chan->max_packet)
- chan->xfer_len = chan->max_packet;
- else if (!chan->ep_is_in && chan->xfer_len > 188)
- chan->xfer_len = 188;
-
- hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
- TSIZ_XFERSIZE_MASK;
-
- /* For split set ec_mc for immediate retries */
- if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
- chan->ep_type == USB_ENDPOINT_XFER_ISOC)
- ec_mc = 3;
- else
- ec_mc = 1;
- } else {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "no split\n");
- /*
- * Ensure that the transfer length and packet count will fit
- * in the widths allocated for them in the HCTSIZn register
- */
- if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
- chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
- /*
- * Make sure the transfer size is no larger than one
- * (micro)frame's worth of data. (A check was done
- * when the periodic transfer was accepted to ensure
- * that a (micro)frame's worth of data can be
- * programmed into a channel.)
- */
- u32 max_periodic_len =
- chan->multi_count * chan->max_packet;
-
- if (chan->xfer_len > max_periodic_len)
- chan->xfer_len = max_periodic_len;
- } else if (chan->xfer_len > max_hc_xfer_size) {
- /*
- * Make sure that xfer_len is a multiple of max packet
- * size
- */
- chan->xfer_len =
- max_hc_xfer_size - chan->max_packet + 1;
- }
+ u32 pcgcctl;
+ int ret = 0;
- if (chan->xfer_len > 0) {
- num_packets = (chan->xfer_len + chan->max_packet - 1) /
- chan->max_packet;
- if (num_packets > max_hc_pkt_count) {
- num_packets = max_hc_pkt_count;
- chan->xfer_len = num_packets * chan->max_packet;
- }
- } else {
- /* Need 1 packet for transfer length of 0 */
- num_packets = 1;
- }
+ if (!hsotg->core_params->hibernation)
+ return -ENOTSUPP;
- if (chan->ep_is_in)
- /*
- * Always program an integral # of max packets for IN
- * transfers
- */
- chan->xfer_len = num_packets * chan->max_packet;
-
- if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
- chan->ep_type == USB_ENDPOINT_XFER_ISOC)
- /*
- * Make sure that the multi_count field matches the
- * actual transfer length
- */
- chan->multi_count = num_packets;
-
- if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
- dwc2_set_pid_isoc(chan);
-
- hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
- TSIZ_XFERSIZE_MASK;
-
- /* The ec_mc gets the multi_count for non-split */
- ec_mc = chan->multi_count;
- }
+ pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
+ pcgcctl &= ~PCGCTL_STOPPCLK;
+ dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
- chan->start_pkt_count = num_packets;
- hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK;
- hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
- TSIZ_SC_MC_PID_MASK;
- dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
- if (dbg_hc(chan)) {
- dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n",
- hctsiz, chan->hc_num);
-
- dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
- chan->hc_num);
- dev_vdbg(hsotg->dev, " Xfer Size: %d\n",
- (hctsiz & TSIZ_XFERSIZE_MASK) >>
- TSIZ_XFERSIZE_SHIFT);
- dev_vdbg(hsotg->dev, " Num Pkts: %d\n",
- (hctsiz & TSIZ_PKTCNT_MASK) >>
- TSIZ_PKTCNT_SHIFT);
- dev_vdbg(hsotg->dev, " Start PID: %d\n",
- (hctsiz & TSIZ_SC_MC_PID_MASK) >>
- TSIZ_SC_MC_PID_SHIFT);
- }
+ pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
+ pcgcctl &= ~PCGCTL_PWRCLMP;
+ dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
- if (hsotg->core_params->dma_enable > 0) {
- dma_addr_t dma_addr;
+ pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
+ pcgcctl &= ~PCGCTL_RSTPDWNMODULE;
+ dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
- if (chan->align_buf) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "align_buf\n");
- dma_addr = chan->align_buf;
+ udelay(100);
+ if (restore) {
+ ret = dwc2_restore_global_registers(hsotg);
+ if (ret) {
+ dev_err(hsotg->dev, "%s: failed to restore registers\n",
+ __func__);
+ return ret;
+ }
+ if (dwc2_is_host_mode(hsotg)) {
+ ret = dwc2_restore_host_registers(hsotg);
+ if (ret) {
+ dev_err(hsotg->dev, "%s: failed to restore host registers\n",
+ __func__);
+ return ret;
+ }
} else {
- dma_addr = chan->xfer_dma;
+ ret = dwc2_restore_device_registers(hsotg);
+ if (ret) {
+ dev_err(hsotg->dev, "%s: failed to restore device registers\n",
+ __func__);
+ return ret;
+ }
}
- dwc2_writel((u32)dma_addr, hsotg->regs + HCDMA(chan->hc_num));
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n",
- (unsigned long)dma_addr, chan->hc_num);
- }
-
- /* Start the split */
- if (chan->do_split) {
- u32 hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chan->hc_num));
-
- hcsplt |= HCSPLT_SPLTENA;
- dwc2_writel(hcsplt, hsotg->regs + HCSPLT(chan->hc_num));
}
- hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- hcchar &= ~HCCHAR_MULTICNT_MASK;
- hcchar |= (ec_mc << HCCHAR_MULTICNT_SHIFT) & HCCHAR_MULTICNT_MASK;
- dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
-
- if (hcchar & HCCHAR_CHDIS)
- dev_warn(hsotg->dev,
- "%s: chdis set, channel %d, hcchar 0x%08x\n",
- __func__, chan->hc_num, hcchar);
-
- /* Set host channel enable after all other setup is complete */
- hcchar |= HCCHAR_CHENA;
- hcchar &= ~HCCHAR_CHDIS;
-
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, " Multi Cnt: %d\n",
- (hcchar & HCCHAR_MULTICNT_MASK) >>
- HCCHAR_MULTICNT_SHIFT);
-
- dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
- chan->hc_num);
-
- chan->xfer_started = 1;
- chan->requests++;
-
- if (hsotg->core_params->dma_enable <= 0 &&
- !chan->ep_is_in && chan->xfer_len > 0)
- /* Load OUT packet into the appropriate Tx FIFO */
- dwc2_hc_write_packet(hsotg, chan);
+ return ret;
}
/**
- * dwc2_hc_start_transfer_ddma() - Does the setup for a data transfer for a
- * host channel and starts the transfer in Descriptor DMA mode
- *
- * @hsotg: Programming view of DWC_otg controller
- * @chan: Information needed to initialize the host channel
- *
- * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set.
- * Sets PID and NTD values. For periodic transfers initializes SCHED_INFO field
- * with micro-frame bitmap.
+ * dwc2_enter_hibernation() - Put controller in Partial Power Down.
*
- * Initializes HCDMA register with descriptor list address and CTD value then
- * starts the transfer via enabling the channel.
+ * @hsotg: Programming view of the DWC_otg controller
*/
-void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan)
+int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg)
{
- u32 hcchar;
- u32 hctsiz = 0;
-
- if (chan->do_ping)
- hctsiz |= TSIZ_DOPNG;
-
- if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
- dwc2_set_pid_isoc(chan);
-
- /* Packet Count and Xfer Size are not used in Descriptor DMA mode */
- hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
- TSIZ_SC_MC_PID_MASK;
+ u32 pcgcctl;
+ int ret = 0;
- /* 0 - 1 descriptor, 1 - 2 descriptors, etc */
- hctsiz |= (chan->ntd - 1) << TSIZ_NTD_SHIFT & TSIZ_NTD_MASK;
+ if (!hsotg->core_params->hibernation)
+ return -ENOTSUPP;
- /* Non-zero only for high-speed interrupt endpoints */
- hctsiz |= chan->schinfo << TSIZ_SCHINFO_SHIFT & TSIZ_SCHINFO_MASK;
+ /* Backup all registers */
+ ret = dwc2_backup_global_registers(hsotg);
+ if (ret) {
+ dev_err(hsotg->dev, "%s: failed to backup global registers\n",
+ __func__);
+ return ret;
+ }
- if (dbg_hc(chan)) {
- dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
- chan->hc_num);
- dev_vdbg(hsotg->dev, " Start PID: %d\n",
- chan->data_pid_start);
- dev_vdbg(hsotg->dev, " NTD: %d\n", chan->ntd - 1);
+ if (dwc2_is_host_mode(hsotg)) {
+ ret = dwc2_backup_host_registers(hsotg);
+ if (ret) {
+ dev_err(hsotg->dev, "%s: failed to backup host registers\n",
+ __func__);
+ return ret;
+ }
+ } else {
+ ret = dwc2_backup_device_registers(hsotg);
+ if (ret) {
+ dev_err(hsotg->dev, "%s: failed to backup device registers\n",
+ __func__);
+ return ret;
+ }
}
- dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
+ /*
+ * Clear any pending interrupts since dwc2 will not be able to
+ * clear them after entering hibernation.
+ */
+ dwc2_writel(0xffffffff, hsotg->regs + GINTSTS);
+
+ /* Put the controller in low power state */
+ pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
- dma_sync_single_for_device(hsotg->dev, chan->desc_list_addr,
- chan->desc_list_sz, DMA_TO_DEVICE);
+ pcgcctl |= PCGCTL_PWRCLMP;
+ dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
+ ndelay(20);
- dwc2_writel(chan->desc_list_addr, hsotg->regs + HCDMA(chan->hc_num));
+ pcgcctl |= PCGCTL_RSTPDWNMODULE;
+ dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
+ ndelay(20);
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "Wrote %pad to HCDMA(%d)\n",
- &chan->desc_list_addr, chan->hc_num);
+ pcgcctl |= PCGCTL_STOPPCLK;
+ dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
- hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- hcchar &= ~HCCHAR_MULTICNT_MASK;
- hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT &
- HCCHAR_MULTICNT_MASK;
+ return ret;
+}
- if (hcchar & HCCHAR_CHDIS)
- dev_warn(hsotg->dev,
- "%s: chdis set, channel %d, hcchar 0x%08x\n",
- __func__, chan->hc_num, hcchar);
+/*
+ * Do core a soft reset of the core. Be careful with this because it
+ * resets all the internal state machines of the core.
+ */
+int dwc2_core_reset(struct dwc2_hsotg *hsotg)
+{
+ u32 greset;
+ int count = 0;
- /* Set host channel enable after all other setup is complete */
- hcchar |= HCCHAR_CHENA;
- hcchar &= ~HCCHAR_CHDIS;
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, " Multi Cnt: %d\n",
- (hcchar & HCCHAR_MULTICNT_MASK) >>
- HCCHAR_MULTICNT_SHIFT);
+ /* Core Soft Reset */
+ greset = dwc2_readl(hsotg->regs + GRSTCTL);
+ greset |= GRSTCTL_CSFTRST;
+ dwc2_writel(greset, hsotg->regs + GRSTCTL);
+ do {
+ udelay(1);
+ greset = dwc2_readl(hsotg->regs + GRSTCTL);
+ if (++count > 50) {
+ dev_warn(hsotg->dev,
+ "%s() HANG! Soft Reset GRSTCTL=%0x\n",
+ __func__, greset);
+ return -EBUSY;
+ }
+ } while (greset & GRSTCTL_CSFTRST);
- dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
- chan->hc_num);
+ /* Wait for AHB master IDLE state */
+ count = 0;
+ do {
+ udelay(1);
+ greset = dwc2_readl(hsotg->regs + GRSTCTL);
+ if (++count > 50) {
+ dev_warn(hsotg->dev,
+ "%s() HANG! AHB Idle GRSTCTL=%0x\n",
+ __func__, greset);
+ return -EBUSY;
+ }
+ } while (!(greset & GRSTCTL_AHBIDLE));
- chan->xfer_started = 1;
- chan->requests++;
+ return 0;
}
-/**
- * dwc2_hc_continue_transfer() - Continues a data transfer that was started by
- * a previous call to dwc2_hc_start_transfer()
+/*
+ * Force the mode of the controller.
*
- * @hsotg: Programming view of DWC_otg controller
- * @chan: Information needed to initialize the host channel
+ * Forcing the mode is needed for two cases:
+ *
+ * 1) If the dr_mode is set to either HOST or PERIPHERAL we force the
+ * controller to stay in a particular mode regardless of ID pin
+ * changes. We do this usually after a core reset.
+ *
+ * 2) During probe we want to read reset values of the hw
+ * configuration registers that are only available in either host or
+ * device mode. We may need to force the mode if the current mode does
+ * not allow us to access the register in the mode that we want.
*
- * The caller must ensure there is sufficient space in the request queue and Tx
- * Data FIFO. This function should only be called in Slave mode. In DMA mode,
- * the controller acts autonomously to complete transfers programmed to a host
- * channel.
+ * In either case it only makes sense to force the mode if the
+ * controller hardware is OTG capable.
+ *
+ * Checks are done in this function to determine whether doing a force
+ * would be valid or not.
*
- * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
- * if there is any data remaining to be queued. For an IN transfer, another
- * data packet is always requested. For the SETUP phase of a control transfer,
- * this function does nothing.
+ * If a force is done, it requires a 25ms delay to take effect.
*
- * Return: 1 if a new request is queued, 0 if no more requests are required
- * for this transfer
+ * Returns true if the mode was forced.
*/
-int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan)
+static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
{
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
- chan->hc_num);
-
- if (chan->do_split)
- /* SPLITs always queue just once per channel */
- return 0;
-
- if (chan->data_pid_start == DWC2_HC_PID_SETUP)
- /* SETUPs are queued only once since they can't be NAK'd */
- return 0;
-
- if (chan->ep_is_in) {
- /*
- * Always queue another request for other IN transfers. If
- * back-to-back INs are issued and NAKs are received for both,
- * the driver may still be processing the first NAK when the
- * second NAK is received. When the interrupt handler clears
- * the NAK interrupt for the first NAK, the second NAK will
- * not be seen. So we can't depend on the NAK interrupt
- * handler to requeue a NAK'd request. Instead, IN requests
- * are issued each time this function is called. When the
- * transfer completes, the extra requests for the channel will
- * be flushed.
- */
- u32 hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
-
- dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
- hcchar |= HCCHAR_CHENA;
- hcchar &= ~HCCHAR_CHDIS;
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, " IN xfer: hcchar = 0x%08x\n",
- hcchar);
- dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- chan->requests++;
- return 1;
- }
+ u32 gusbcfg;
+ u32 set;
+ u32 clear;
- /* OUT transfers */
+ dev_dbg(hsotg->dev, "Forcing mode to %s\n", host ? "host" : "device");
- if (chan->xfer_count < chan->xfer_len) {
- if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
- chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
- u32 hcchar = dwc2_readl(hsotg->regs +
- HCCHAR(chan->hc_num));
+ /*
+ * Force mode has no effect if the hardware is not OTG.
+ */
+ if (!dwc2_hw_is_otg(hsotg))
+ return false;
- dwc2_hc_set_even_odd_frame(hsotg, chan,
- &hcchar);
- }
+ /*
+ * If dr_mode is either peripheral or host only, there is no
+ * need to ever force the mode to the opposite mode.
+ */
+ if (WARN_ON(host && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
+ return false;
- /* Load OUT packet into the appropriate Tx FIFO */
- dwc2_hc_write_packet(hsotg, chan);
- chan->requests++;
- return 1;
- }
+ if (WARN_ON(!host && hsotg->dr_mode == USB_DR_MODE_HOST))
+ return false;
- return 0;
+ gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+
+ set = host ? GUSBCFG_FORCEHOSTMODE : GUSBCFG_FORCEDEVMODE;
+ clear = host ? GUSBCFG_FORCEDEVMODE : GUSBCFG_FORCEHOSTMODE;
+
+ gusbcfg &= ~clear;
+ gusbcfg |= set;
+ dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
+
+ msleep(25);
+ return true;
}
-/**
- * dwc2_hc_do_ping() - Starts a PING transfer
- *
- * @hsotg: Programming view of DWC_otg controller
- * @chan: Information needed to initialize the host channel
- *
- * This function should only be called in Slave mode. The Do Ping bit is set in
- * the HCTSIZ register, then the channel is enabled.
+/*
+ * Clears the force mode bits.
*/
-void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
+static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
{
- u32 hcchar;
- u32 hctsiz;
-
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
- chan->hc_num);
-
+ u32 gusbcfg;
- hctsiz = TSIZ_DOPNG;
- hctsiz |= 1 << TSIZ_PKTCNT_SHIFT;
- dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
+ gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+ gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
+ gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
+ dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- hcchar |= HCCHAR_CHENA;
- hcchar &= ~HCCHAR_CHDIS;
- dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
+ /*
+ * NOTE: This long sleep is _very_ important, otherwise the core will
+ * not stay in host mode after a connector ID change!
+ */
+ msleep(25);
}
-/**
- * dwc2_calc_frame_interval() - Calculates the correct frame Interval value for
- * the HFIR register according to PHY type and speed
- *
- * @hsotg: Programming view of DWC_otg controller
- *
- * NOTE: The caller can modify the value of the HFIR register only after the
- * Port Enable bit of the Host Port Control and Status register (HPRT.EnaPort)
- * has been set
+/*
+ * Sets or clears force mode based on the dr_mode parameter.
*/
-u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg)
+void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
{
- u32 usbcfg;
- u32 hprt0;
- int clock = 60; /* default value */
-
- usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- hprt0 = dwc2_readl(hsotg->regs + HPRT0);
-
- if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) &&
- !(usbcfg & GUSBCFG_PHYIF16))
- clock = 60;
- if ((usbcfg & GUSBCFG_PHYSEL) && hsotg->hw_params.fs_phy_type ==
- GHWCFG2_FS_PHY_TYPE_SHARED_ULPI)
- clock = 48;
- if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
- !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16))
- clock = 30;
- if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
- !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && !(usbcfg & GUSBCFG_PHYIF16))
- clock = 60;
- if ((usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
- !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16))
- clock = 48;
- if ((usbcfg & GUSBCFG_PHYSEL) && !(usbcfg & GUSBCFG_PHYIF16) &&
- hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_SHARED_UTMI)
- clock = 48;
- if ((usbcfg & GUSBCFG_PHYSEL) &&
- hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED)
- clock = 48;
-
- if ((hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT == HPRT0_SPD_HIGH_SPEED)
- /* High speed case */
- return 125 * clock;
- else
- /* FS/LS case */
- return 1000 * clock;
+ switch (hsotg->dr_mode) {
+ case USB_DR_MODE_HOST:
+ dwc2_force_mode(hsotg, true);
+ break;
+ case USB_DR_MODE_PERIPHERAL:
+ dwc2_force_mode(hsotg, false);
+ break;
+ case USB_DR_MODE_OTG:
+ dwc2_clear_force_mode(hsotg);
+ break;
+ default:
+ dev_warn(hsotg->dev, "%s() Invalid dr_mode=%d\n",
+ __func__, hsotg->dr_mode);
+ break;
+ }
+
+ /*
+ * NOTE: This is required for some rockchip soc based
+ * platforms.
+ */
+ msleep(50);
}
-/**
- * dwc2_read_packet() - Reads a packet from the Rx FIFO into the destination
- * buffer
+/*
+ * Do core a soft reset of the core. Be careful with this because it
+ * resets all the internal state machines of the core.
*
- * @core_if: Programming view of DWC_otg controller
- * @dest: Destination buffer for the packet
- * @bytes: Number of bytes to copy to the destination
+ * Additionally this will apply force mode as per the hsotg->dr_mode
+ * parameter.
*/
-void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes)
+int dwc2_core_reset_and_force_dr_mode(struct dwc2_hsotg *hsotg)
{
- u32 __iomem *fifo = hsotg->regs + HCFIFO(0);
- u32 *data_buf = (u32 *)dest;
- int word_count = (bytes + 3) / 4;
- int i;
-
- /*
- * Todo: Account for the case where dest is not dword aligned. This
- * requires reading data from the FIFO into a u32 temp buffer, then
- * moving it into the data buffer.
- */
+ int retval;
- dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes);
+ retval = dwc2_core_reset(hsotg);
+ if (retval)
+ return retval;
- for (i = 0; i < word_count; i++, data_buf++)
- *data_buf = dwc2_readl(fifo);
+ dwc2_force_dr_mode(hsotg);
+ return 0;
}
/**
width = (hwcfg3 & GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK) >>
GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT;
hw->max_transfer_size = (1 << (width + 11)) - 1;
- /*
- * Clip max_transfer_size to 65535. dwc2_hc_setup_align_buf() allocates
- * coherent buffers with this size, and if it's too large we can
- * exhaust the coherent DMA pool.
- */
- if (hw->max_transfer_size > 65535)
- hw->max_transfer_size = 65535;
width = (hwcfg3 & GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK) >>
GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT;
hw->max_packet_count = (1 << (width + 4)) - 1;
projects / cascardo / linux.git / blobdiff