* @dir_in: Set to true if this endpoint is of the IN direction, which
* means that it is sending data to the Host.
* @index: The index for the endpoint registers.
+ * @mc: Multi Count - number of transactions per microframe
+ * @interval - Interval for periodic endpoints
* @name: The name array passed to the USB core.
* @halted: Set if the endpoint has been halted.
* @periodic: Set if this is a periodic ep, such as Interrupt
+ * @isochronous: Set if this is a isochronous ep
* @sent_zlp: Set if we've sent a zero-length packet.
* @total_data: The total number of data bytes done.
* @fifo_size: The size of the FIFO (for periodic IN endpoints)
unsigned char dir_in;
unsigned char index;
+ unsigned char mc;
+ unsigned char interval;
unsigned int halted:1;
unsigned int periodic:1;
+ unsigned int isochronous:1;
unsigned int sent_zlp:1;
char name[10];
void *data;
int can_write;
int pkt_round;
+ int max_transfer;
to_write -= (buf_pos - hs_ep->last_load);
can_write *= 4; /* fifo size is in 32bit quantities. */
}
- dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n",
- __func__, gnptxsts, can_write, to_write, hs_ep->ep.maxpacket);
+ max_transfer = hs_ep->ep.maxpacket * hs_ep->mc;
+
+ dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, max_transfer %d\n",
+ __func__, gnptxsts, can_write, to_write, max_transfer);
/*
* limit to 512 bytes of data, it seems at least on the non-periodic
* the transfer to return that it did not run out of fifo space
* doing it.
*/
- if (to_write > hs_ep->ep.maxpacket) {
- to_write = hs_ep->ep.maxpacket;
+ if (to_write > max_transfer) {
+ to_write = max_transfer;
- s3c_hsotg_en_gsint(hsotg,
- periodic ? GINTSTS_PTxFEmp :
- GINTSTS_NPTxFEmp);
+ /* it's needed only when we do not use dedicated fifos */
+ if (!hsotg->dedicated_fifos)
+ s3c_hsotg_en_gsint(hsotg,
+ periodic ? GINTSTS_PTxFEmp :
+ GINTSTS_NPTxFEmp);
}
/* see if we can write data */
if (to_write > can_write) {
to_write = can_write;
- pkt_round = to_write % hs_ep->ep.maxpacket;
+ pkt_round = to_write % max_transfer;
/*
* Round the write down to an
* is more room left.
*/
- s3c_hsotg_en_gsint(hsotg,
- periodic ? GINTSTS_PTxFEmp :
- GINTSTS_NPTxFEmp);
+ /* it's needed only when we do not use dedicated fifos */
+ if (!hsotg->dedicated_fifos)
+ s3c_hsotg_en_gsint(hsotg,
+ periodic ? GINTSTS_PTxFEmp :
+ GINTSTS_NPTxFEmp);
}
dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n",
else
packets = 1; /* send one packet if length is zero. */
+ if (hs_ep->isochronous && length > (hs_ep->mc * hs_ep->ep.maxpacket)) {
+ dev_err(hsotg->dev, "req length > maxpacket*mc\n");
+ return;
+ }
+
if (dir_in && index != 0)
- epsize = DxEPTSIZ_MC(1);
+ if (hs_ep->isochronous)
+ epsize = DxEPTSIZ_MC(packets);
+ else
+ epsize = DxEPTSIZ_MC(1);
else
epsize = 0;
dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n",
__func__, readl(hsotg->regs + epctrl_reg));
+
+ /* enable ep interrupts */
+ s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 1);
}
/**
bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
struct s3c_hsotg_ep *ep;
int ret;
+ bool halted;
dev_dbg(hsotg->dev, "%s: %s_FEATURE\n",
__func__, set ? "SET" : "CLEAR");
switch (le16_to_cpu(ctrl->wValue)) {
case USB_ENDPOINT_HALT:
+ halted = ep->halted;
+
s3c_hsotg_ep_sethalt(&ep->ep, set);
ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0);
return ret;
}
- if (!set) {
+ /*
+ * we have to complete all requests for ep if it was
+ * halted, and the halt was cleared by CLEAR_FEATURE
+ */
+
+ if (!set && halted) {
/*
* If we have request in progress,
* then complete it
return 1;
}
+static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
+
/**
* s3c_hsotg_process_control - process a control request
* @hsotg: The device state
* don't believe we need to anything more to get the EP
* to reply with a STALL packet
*/
+
+ /*
+ * complete won't be called, so we enqueue
+ * setup request here
+ */
+ s3c_hsotg_enqueue_setup(hsotg);
}
}
-static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
-
/**
* s3c_hsotg_complete_setup - completion of a setup transfer
* @ep: The endpoint the request was on.
struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep];
void __iomem *regs = hsotg->regs;
u32 mpsval;
+ u32 mcval;
u32 reg;
if (ep == 0) {
mpsval = s3c_hsotg_ep0_mps(mps);
if (mpsval > 3)
goto bad_mps;
+ hs_ep->ep.maxpacket = mps;
+ hs_ep->mc = 1;
} else {
- if (mps >= DxEPCTL_MPS_LIMIT+1)
+ mpsval = mps & DxEPCTL_MPS_MASK;
+ if (mpsval > 1024)
goto bad_mps;
-
- mpsval = mps;
+ mcval = ((mps >> 11) & 0x3) + 1;
+ hs_ep->mc = mcval;
+ if (mcval > 3)
+ goto bad_mps;
+ hs_ep->ep.maxpacket = mpsval;
}
- hs_ep->ep.maxpacket = mps;
-
/*
* update both the in and out endpoint controldir_ registers, even
* if one of the directions may not be in use.
{
struct s3c_hsotg_req *hs_req = hs_ep->req;
- if (!hs_ep->dir_in || !hs_req)
+ if (!hs_ep->dir_in || !hs_req) {
+ /**
+ * if request is not enqueued, we disable interrupts
+ * for endpoints, excepting ep0
+ */
+ if (hs_ep->index != 0)
+ s3c_hsotg_ctrl_epint(hsotg, hs_ep->index,
+ hs_ep->dir_in, 0);
return 0;
+ }
if (hs_req->req.actual < hs_req->req.length) {
dev_dbg(hsotg->dev, "trying to write more for ep%d\n",
u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx);
u32 epsiz_reg = dir_in ? DIEPTSIZ(idx) : DOEPTSIZ(idx);
u32 ints;
+ u32 ctrl;
ints = readl(hsotg->regs + epint_reg);
+ ctrl = readl(hsotg->regs + epctl_reg);
/* Clear endpoint interrupts */
writel(ints, hsotg->regs + epint_reg);
__func__, idx, dir_in ? "in" : "out", ints);
if (ints & DxEPINT_XferCompl) {
+ if (hs_ep->isochronous && hs_ep->interval == 1) {
+ if (ctrl & DxEPCTL_EOFrNum)
+ ctrl |= DxEPCTL_SetEvenFr;
+ else
+ ctrl |= DxEPCTL_SetOddFr;
+ writel(ctrl, hsotg->regs + epctl_reg);
+ }
+
dev_dbg(hsotg->dev,
"%s: XferCompl: DxEPCTL=0x%08x, DxEPTSIZ=%08x\n",
__func__, readl(hsotg->regs + epctl_reg),
if (ints & DxEPINT_Back2BackSetup)
dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__);
- if (dir_in) {
+ if (dir_in && !hs_ep->isochronous) {
/* not sure if this is important, but we'll clear it anyway */
if (ints & DIEPMSK_INTknTXFEmpMsk) {
dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n",
}
#define call_gadget(_hs, _entry) \
+do { \
if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \
(_hs)->driver && (_hs)->driver->_entry) { \
spin_unlock(&_hs->lock); \
(_hs)->driver->_entry(&(_hs)->gadget); \
spin_lock(&_hs->lock); \
- }
+ } \
+} while (0)
/**
* s3c_hsotg_disconnect - disconnect service
GAHBCFG_HBstLen_Incr4,
hsotg->regs + GAHBCFG);
else
- writel(GAHBCFG_GlblIntrEn, hsotg->regs + GAHBCFG);
+ writel(((hsotg->dedicated_fifos) ? (GAHBCFG_NPTxFEmpLvl |
+ GAHBCFG_PTxFEmpLvl) : 0) |
+ GAHBCFG_GlblIntrEn,
+ hsotg->regs + GAHBCFG);
/*
- * Enabling INTknTXFEmpMsk here seems to be a big mistake, we end
- * up being flooded with interrupts if the host is polling the
- * endpoint to try and read data.
+ * If INTknTXFEmpMsk is enabled, it's important to disable ep interrupts
+ * when we have no data to transfer. Otherwise we get being flooded by
+ * interrupts.
*/
- writel(((hsotg->dedicated_fifos) ? DIEPMSK_TxFIFOEmpty : 0) |
+ writel(((hsotg->dedicated_fifos) ? DIEPMSK_TxFIFOEmpty |
+ DIEPMSK_INTknTXFEmpMsk : 0) |
DIEPMSK_EPDisbldMsk | DIEPMSK_XferComplMsk |
DIEPMSK_TimeOUTMsk | DIEPMSK_AHBErrMsk |
DIEPMSK_INTknEPMisMsk,
if (gintsts & (GINTSTS_OEPInt | GINTSTS_IEPInt)) {
u32 daint = readl(hsotg->regs + DAINT);
- u32 daint_out = daint >> DAINT_OutEP_SHIFT;
- u32 daint_in = daint & ~(daint_out << DAINT_OutEP_SHIFT);
+ u32 daintmsk = readl(hsotg->regs + DAINTMSK);
+ u32 daint_out, daint_in;
int ep;
+ daint &= daintmsk;
+ daint_out = daint >> DAINT_OutEP_SHIFT;
+ daint_in = daint & ~(daint_out << DAINT_OutEP_SHIFT);
+
dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint);
for (ep = 0; ep < 15 && daint_out; ep++, daint_out >>= 1) {
epctrl |= DxEPCTL_SNAK;
/* update the endpoint state */
- hs_ep->ep.maxpacket = mps;
+ s3c_hsotg_set_ep_maxpacket(hsotg, hs_ep->index, mps);
/* default, set to non-periodic */
+ hs_ep->isochronous = 0;
hs_ep->periodic = 0;
+ hs_ep->halted = 0;
+ hs_ep->interval = desc->bInterval;
+
+ if (hs_ep->interval > 1 && hs_ep->mc > 1)
+ dev_err(hsotg->dev, "MC > 1 when interval is not 1\n");
switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
case USB_ENDPOINT_XFER_ISOC:
- dev_err(hsotg->dev, "no current ISOC support\n");
- ret = -EINVAL;
- goto out;
+ epctrl |= DxEPCTL_EPType_Iso;
+ epctrl |= DxEPCTL_SetEvenFr;
+ hs_ep->isochronous = 1;
+ if (dir_in)
+ hs_ep->periodic = 1;
+ break;
case USB_ENDPOINT_XFER_BULK:
epctrl |= DxEPCTL_EPType_Bulk;
/* enable the endpoint interrupt */
s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
-out:
spin_unlock_irqrestore(&hsotg->lock, flags);
return ret;
}
writel(epctl, hs->regs + epreg);
+ hs_ep->halted = value;
+
return 0;
}
int ret;
if (!hsotg) {
- printk(KERN_ERR "%s: called with no device\n", __func__);
+ pr_err("%s: called with no device\n", __func__);
return -ENODEV;
}
hs_ep->parent = hsotg;
hs_ep->ep.name = hs_ep->name;
- hs_ep->ep.maxpacket = epnum ? 512 : EP0_MPS_LIMIT;
+ hs_ep->ep.maxpacket = epnum ? 1024 : EP0_MPS_LIMIT;
hs_ep->ep.ops = &s3c_hsotg_ep_ops;
/*
readl(regs + GNPTXSTS),
readl(regs + GRXSTSR));
- seq_printf(seq, "\nEndpoint status:\n");
+ seq_puts(seq, "\nEndpoint status:\n");
for (idx = 0; idx < 15; idx++) {
u32 in, out;
seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
in, out);
- seq_printf(seq, "\n");
+ seq_puts(seq, "\n");
}
return 0;
u32 val;
int idx;
- seq_printf(seq, "Non-periodic FIFOs:\n");
+ seq_puts(seq, "Non-periodic FIFOs:\n");
seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ));
val = readl(regs + GNPTXFSIZ);
val >> GNPTXFSIZ_NPTxFDep_SHIFT,
val & GNPTXFSIZ_NPTxFStAddr_MASK);
- seq_printf(seq, "\nPeriodic TXFIFOs:\n");
+ seq_puts(seq, "\nPeriodic TXFIFOs:\n");
for (idx = 1; idx <= 15; idx++) {
val = readl(regs + DPTXFSIZn(idx));
readl(regs + DIEPTSIZ(index)),
readl(regs + DOEPTSIZ(index)));
- seq_printf(seq, "\n");
+ seq_puts(seq, "\n");
seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
seq_printf(seq, "total_data=%ld\n", ep->total_data);
list_for_each_entry(req, &ep->queue, queue) {
if (--show_limit < 0) {
- seq_printf(seq, "not showing more requests...\n");
+ seq_puts(seq, "not showing more requests...\n");
break;
}
projects / cascardo / linux.git / blobdiff