Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...

[cascardo/linux.git] / drivers / usb / serial / cp2101.c

diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 33f6ee5..2283358 100644 (file)
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -53,7 +53,9 @@ static void cp2101_shutdown(struct usb_serial*);
 static int debug;
 
 static struct usb_device_id id_table [] = {
+       { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
        { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
+       { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
        { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
        { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
        { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
@@ -70,6 +72,7 @@ static struct usb_device_id id_table [] = {
        { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
        { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
        { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
+       { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
        { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
        { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
        { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
@@ -97,8 +100,8 @@ static struct usb_serial_driver cp2101_device = {
        .usb_driver             = &cp2101_driver,
        .id_table               = id_table,
        .num_interrupt_in       = 0,
-       .num_bulk_in            = 0,
-       .num_bulk_out           = 0,
+       .num_bulk_in            = NUM_DONT_CARE,
+       .num_bulk_out           = NUM_DONT_CARE,
        .num_ports              = 1,
        .open                   = cp2101_open,
        .close                  = cp2101_close,
@@ -360,7 +363,6 @@ static void cp2101_get_termios (struct usb_serial_port *port)
                dbg("%s - no tty structures", __FUNCTION__);
                return;
        }
-       cflag = port->tty->termios->c_cflag;
 
        cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
        /* Convert to baudrate */
@@ -368,40 +370,9 @@ static void cp2101_get_termios (struct usb_serial_port *port)
                baud = BAUD_RATE_GEN_FREQ / baud;
 
        dbg("%s - baud rate = %d", __FUNCTION__, baud);
-       cflag &= ~CBAUD;
-       switch (baud) {
-               /*
-                * The baud rates which are commented out below
-                * appear to be supported by the device
-                * but are non-standard
-                */
-               case 600:       cflag |= B600;          break;
-               case 1200:      cflag |= B1200;         break;
-               case 1800:      cflag |= B1800;         break;
-               case 2400:      cflag |= B2400;         break;
-               case 4800:      cflag |= B4800;         break;
-               /*case 7200:    cflag |= B7200;         break;*/
-               case 9600:      cflag |= B9600;         break;
-               /*case 14400:   cflag |= B14400;        break;*/
-               case 19200:     cflag |= B19200;        break;
-               /*case 28800:   cflag |= B28800;        break;*/
-               case 38400:     cflag |= B38400;        break;
-               /*case 55854:   cflag |= B55054;        break;*/
-               case 57600:     cflag |= B57600;        break;
-               case 115200:    cflag |= B115200;       break;
-               /*case 127117:  cflag |= B127117;       break;*/
-               case 230400:    cflag |= B230400;       break;
-               case 460800:    cflag |= B460800;       break;
-               case 921600:    cflag |= B921600;       break;
-               /*case 3686400: cflag |= B3686400;      break;*/
-               default:
-                       dbg("%s - Baud rate is not supported, "
-                                       "using 9600 baud", __FUNCTION__);
-                       cflag |= B9600;
-                       cp2101_set_config_single(port, CP2101_BAUDRATE,
-                                       (BAUD_RATE_GEN_FREQ/9600));
-                       break;
-       }
+
+       tty_encode_baud_rate(port->tty, baud, baud);
+       cflag = port->tty->termios->c_cflag;
 
        cp2101_get_config(port, CP2101_BITS, &bits, 2);
        cflag &= ~CSIZE;
@@ -515,16 +486,18 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 static void cp2101_set_termios (struct usb_serial_port *port,
                struct ktermios *old_termios)
 {
-       unsigned int cflag, old_cflag=0;
+       unsigned int cflag, old_cflag;
        int baud=0, bits;
        unsigned int modem_ctl[4];
 
        dbg("%s - port %d", __FUNCTION__, port->number);
 
-       if ((!port->tty) || (!port->tty->termios)) {
+       if (!port->tty || !port->tty->termios) {
                dbg("%s - no tty structures", __FUNCTION__);
                return;
        }
+       port->tty->termios->c_cflag &= ~CMSPAR;
+
        cflag = port->tty->termios->c_cflag;
        old_cflag = old_termios->c_cflag;
        baud = tty_get_baud_rate(port->tty);
@@ -562,11 +535,15 @@ static void cp2101_set_termios (struct usb_serial_port *port,
                        dbg("%s - Setting baud rate to %d baud", __FUNCTION__,
                                        baud);
                        if (cp2101_set_config_single(port, CP2101_BAUDRATE,
-                                               (BAUD_RATE_GEN_FREQ / baud)))
+                                               (BAUD_RATE_GEN_FREQ / baud))) {
                                dev_err(&port->dev, "Baud rate requested not "
                                                "supported by device\n");
+                               baud = tty_termios_baud_rate(old_termios);
+                       }
                }
        }
+       /* Report back the resulting baud rate */
+       tty_encode_baud_rate(port->tty, baud, baud);
 
        /* If the number of data bits is to be updated */
        if ((cflag & CSIZE) != (old_cflag & CSIZE)) {