#include <linux/slab.h>
#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_device.h>
#include "usb.h"
us->current_sg.bytes);
}
+/*
+ * Common used function. Transfer a complete command
+ * via usb_stor_bulk_transfer_sglist() above. Set cmnd resid
+ */
+int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
+ struct scsi_cmnd* srb)
+{
+ unsigned int partial;
+ int result = usb_stor_bulk_transfer_sglist(us, pipe, scsi_sglist(srb),
+ scsi_sg_count(srb), scsi_bufflen(srb),
+ &partial);
+
+ scsi_set_resid(srb, scsi_bufflen(srb) - partial);
+ return result;
+}
+
/*
* Transfer an entire SCSI command's worth of data payload over the bulk
* pipe.
int result;
/* send the command to the transport layer */
- srb->resid = 0;
+ scsi_set_resid(srb, 0);
result = us->transport(srb, us);
/* if the command gets aborted by the higher layers, we need to
* A short transfer on a command where we don't expect it
* is unusual, but it doesn't mean we need to auto-sense.
*/
- if ((srb->resid > 0) &&
+ if ((scsi_get_resid(srb) > 0) &&
!((srb->cmnd[0] == REQUEST_SENSE) ||
(srb->cmnd[0] == INQUIRY) ||
(srb->cmnd[0] == MODE_SENSE) ||
/* Now, if we need to do the auto-sense, let's do it */
if (need_auto_sense) {
int temp_result;
- void* old_request_buffer;
- unsigned short old_sg;
- unsigned old_request_bufflen;
- unsigned char old_sc_data_direction;
- unsigned char old_cmd_len;
- unsigned char old_cmnd[MAX_COMMAND_SIZE];
- int old_resid;
+ struct scsi_eh_save ses;
US_DEBUGP("Issuing auto-REQUEST_SENSE\n");
- /* save the old command */
- memcpy(old_cmnd, srb->cmnd, MAX_COMMAND_SIZE);
- old_cmd_len = srb->cmd_len;
-
- /* set the command and the LUN */
- memset(srb->cmnd, 0, MAX_COMMAND_SIZE);
- srb->cmnd[0] = REQUEST_SENSE;
- srb->cmnd[1] = old_cmnd[1] & 0xE0;
- srb->cmnd[4] = 18;
+ scsi_eh_prep_cmnd(srb, &ses, NULL, 0, US_SENSE_SIZE);
/* FIXME: we must do the protocol translation here */
if (us->subclass == US_SC_RBC || us->subclass == US_SC_SCSI)
else
srb->cmd_len = 12;
- /* set the transfer direction */
- old_sc_data_direction = srb->sc_data_direction;
- srb->sc_data_direction = DMA_FROM_DEVICE;
-
- /* use the new buffer we have */
- old_request_buffer = srb->request_buffer;
- srb->request_buffer = us->sensebuf;
-
- /* set the buffer length for transfer */
- old_request_bufflen = srb->request_bufflen;
- srb->request_bufflen = US_SENSE_SIZE;
-
- /* set up for no scatter-gather use */
- old_sg = srb->use_sg;
- srb->use_sg = 0;
-
/* issue the auto-sense command */
- old_resid = srb->resid;
- srb->resid = 0;
+ scsi_set_resid(srb, 0);
temp_result = us->transport(us->srb, us);
/* let's clean up right away */
- memcpy(srb->sense_buffer, us->sensebuf, US_SENSE_SIZE);
- srb->resid = old_resid;
- srb->request_buffer = old_request_buffer;
- srb->request_bufflen = old_request_bufflen;
- srb->use_sg = old_sg;
- srb->sc_data_direction = old_sc_data_direction;
- srb->cmd_len = old_cmd_len;
- memcpy(srb->cmnd, old_cmnd, MAX_COMMAND_SIZE);
+ scsi_eh_restore_cmnd(srb, &ses);
if (test_bit(US_FLIDX_TIMED_OUT, &us->flags)) {
US_DEBUGP("-- auto-sense aborted\n");
/* Did we transfer less than the minimum amount required? */
if (srb->result == SAM_STAT_GOOD &&
- srb->request_bufflen - srb->resid < srb->underflow)
+ scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow)
srb->result = (DID_ERROR << 16) | (SUGGEST_RETRY << 24);
return;
int usb_stor_CBI_transport(struct scsi_cmnd *srb, struct us_data *us)
{
- unsigned int transfer_length = srb->request_bufflen;
+ unsigned int transfer_length = scsi_bufflen(srb);
unsigned int pipe = 0;
int result;
if (transfer_length) {
pipe = srb->sc_data_direction == DMA_FROM_DEVICE ?
us->recv_bulk_pipe : us->send_bulk_pipe;
- result = usb_stor_bulk_transfer_sg(us, pipe,
- srb->request_buffer, transfer_length,
- srb->use_sg, &srb->resid);
+ result = usb_stor_bulk_srb(us, pipe, srb);
US_DEBUGP("CBI data stage result is 0x%x\n", result);
/* if we stalled the data transfer it means command failed */
*/
int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
{
- unsigned int transfer_length = srb->request_bufflen;
+ unsigned int transfer_length = scsi_bufflen(srb);
int result;
/* COMMAND STAGE */
if (transfer_length) {
unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ?
us->recv_bulk_pipe : us->send_bulk_pipe;
- result = usb_stor_bulk_transfer_sg(us, pipe,
- srb->request_buffer, transfer_length,
- srb->use_sg, &srb->resid);
+ result = usb_stor_bulk_srb(us, pipe, srb);
US_DEBUGP("CB data stage result is 0x%x\n", result);
/* if we stalled the data transfer it means command failed */
if (result > 0)
return us->iobuf[0];
- /*
- * Some devices (i.e. Iomega Zip100) need this -- apparently
- * the bulk pipes get STALLed when the GetMaxLUN request is
- * processed. This is, in theory, harmless to all other devices
- * (regardless of if they stall or not).
- */
- if (result == -EPIPE) {
- usb_stor_clear_halt(us, us->recv_bulk_pipe);
- usb_stor_clear_halt(us, us->send_bulk_pipe);
- }
-
/*
* Some devices don't like GetMaxLUN. They may STALL the control
* pipe, they may return a zero-length result, they may do nothing at
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf;
- unsigned int transfer_length = srb->request_bufflen;
+ unsigned int transfer_length = scsi_bufflen(srb);
unsigned int residue;
int result;
int fake_sense = 0;
if (transfer_length) {
unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ?
us->recv_bulk_pipe : us->send_bulk_pipe;
- result = usb_stor_bulk_transfer_sg(us, pipe,
- srb->request_buffer, transfer_length,
- srb->use_sg, &srb->resid);
+ result = usb_stor_bulk_srb(us, pipe, srb);
US_DEBUGP("Bulk data transfer result 0x%x\n", result);
if (result == USB_STOR_XFER_ERROR)
return USB_STOR_TRANSPORT_ERROR;
if (residue) {
if (!(us->flags & US_FL_IGNORE_RESIDUE)) {
residue = min(residue, transfer_length);
- srb->resid = max(srb->resid, (int) residue);
+ scsi_set_resid(srb, max(scsi_get_resid(srb),
+ (int) residue));
}
}