--- /dev/null
+/*
+ * Copyright (C) 2012 CERN (www.cern.ch)
+ * Author: Alessandro Rubini <rubini@gnudd.com>
+ *
+ * Released according to the GNU GPL, version 2 or any later version.
+ *
+ * This work is part of the White Rabbit project, a research effort led
+ * by CERN, the European Institute for Nuclear Research.
+ */
+#ifndef __LINUX_FMC_H__
+#define __LINUX_FMC_H__
+#include <linux/types.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+struct fmc_device;
+struct fmc_driver;
+
+/*
+ * This bus abstraction is developed separately from drivers, so we need
+ * to check the version of the data structures we receive.
+ */
+
+#define FMC_MAJOR 3
+#define FMC_MINOR 0
+#define FMC_VERSION ((FMC_MAJOR << 16) | FMC_MINOR)
+#define __FMC_MAJOR(x) ((x) >> 16)
+#define __FMC_MINOR(x) ((x) & 0xffff)
+
+/*
+ * The device identification, as defined by the IPMI FRU (Field Replaceable
+ * Unit) includes four different strings to describe the device. Here we
+ * only match the "Board Manufacturer" and the "Board Product Name",
+ * ignoring the "Board Serial Number" and "Board Part Number". All 4 are
+ * expected to be strings, so they are treated as zero-terminated C strings.
+ * Unspecified string (NULL) means "any", so if both are unspecified this
+ * is a catch-all driver. So null entries are allowed and we use array
+ * and length. This is unlike pci and usb that use null-terminated arrays
+ */
+struct fmc_fru_id {
+ char *manufacturer;
+ char *product_name;
+};
+
+/*
+ * If the FPGA is already programmed (think Etherbone or the second
+ * SVEC slot), we can match on SDB devices in the memory image. This
+ * match uses an array of devices that must all be present, and the
+ * match is based on vendor and device only. Further checks are expected
+ * to happen in the probe function. Zero means "any" and catch-all is allowed.
+ */
+struct fmc_sdb_one_id {
+ uint64_t vendor;
+ uint32_t device;
+};
+struct fmc_sdb_id {
+ struct fmc_sdb_one_id *cores;
+ int cores_nr;
+};
+
+struct fmc_device_id {
+ struct fmc_fru_id *fru_id;
+ int fru_id_nr;
+ struct fmc_sdb_id *sdb_id;
+ int sdb_id_nr;
+};
+
+/* This sizes the module_param_array used by generic module parameters */
+#define FMC_MAX_CARDS 32
+
+/* The driver is a pretty simple thing */
+struct fmc_driver {
+ unsigned long version;
+ struct device_driver driver;
+ int (*probe)(struct fmc_device *);
+ int (*remove)(struct fmc_device *);
+ const struct fmc_device_id id_table;
+ /* What follows is for generic module parameters */
+ int busid_n;
+ int busid_val[FMC_MAX_CARDS];
+ int gw_n;
+ char *gw_val[FMC_MAX_CARDS];
+};
+#define to_fmc_driver(x) container_of((x), struct fmc_driver, driver)
+
+/* These are the generic parameters, that drivers may instantiate */
+#define FMC_PARAM_BUSID(_d) \
+ module_param_array_named(busid, _d.busid_val, int, &_d.busid_n, 0444)
+#define FMC_PARAM_GATEWARE(_d) \
+ module_param_array_named(gateware, _d.gw_val, charp, &_d.gw_n, 0444)
+
+/*
+ * Drivers may need to configure gpio pins in the carrier. To read input
+ * (a very uncommon operation, and definitely not in the hot paths), just
+ * configure one gpio only and get 0 or 1 as retval of the config method
+ */
+struct fmc_gpio {
+ char *carrier_name; /* name or NULL for virtual pins */
+ int gpio;
+ int _gpio; /* internal use by the carrier */
+ int mode; /* GPIOF_DIR_OUT etc, from <linux/gpio.h> */
+ int irqmode; /* IRQF_TRIGGER_LOW and so on */
+};
+
+/* The numbering of gpio pins allows access to raw pins or virtual roles */
+#define FMC_GPIO_RAW(x) (x) /* 4096 of them */
+#define __FMC_GPIO_IS_RAW(x) ((x) < 0x1000)
+#define FMC_GPIO_IRQ(x) ((x) + 0x1000) /* 256 of them */
+#define FMC_GPIO_LED(x) ((x) + 0x1100) /* 256 of them */
+#define FMC_GPIO_KEY(x) ((x) + 0x1200) /* 256 of them */
+#define FMC_GPIO_TP(x) ((x) + 0x1300) /* 256 of them */
+#define FMC_GPIO_USER(x) ((x) + 0x1400) /* 256 of them */
+/* We may add SCL and SDA, or other roles if the need arises */
+
+/* GPIOF_DIR_IN etc are missing before 3.0. copy from <linux/gpio.h> */
+#ifndef GPIOF_DIR_IN
+# define GPIOF_DIR_OUT (0 << 0)
+# define GPIOF_DIR_IN (1 << 0)
+# define GPIOF_INIT_LOW (0 << 1)
+# define GPIOF_INIT_HIGH (1 << 1)
+#endif
+
+/*
+ * The operations are offered by each carrier and should make driver
+ * design completely independent of the carrier. Named GPIO pins may be
+ * the exception.
+ */
+struct fmc_operations {
+ uint32_t (*readl)(struct fmc_device *fmc, int offset);
+ void (*writel)(struct fmc_device *fmc, uint32_t value, int offset);
+ int (*validate)(struct fmc_device *fmc, struct fmc_driver *drv);
+ int (*reprogram)(struct fmc_device *f, struct fmc_driver *d, char *gw);
+ int (*irq_request)(struct fmc_device *fmc, irq_handler_t h,
+ char *name, int flags);
+ void (*irq_ack)(struct fmc_device *fmc);
+ int (*irq_free)(struct fmc_device *fmc);
+ int (*gpio_config)(struct fmc_device *fmc, struct fmc_gpio *gpio,
+ int ngpio);
+ int (*read_ee)(struct fmc_device *fmc, int pos, void *d, int l);
+ int (*write_ee)(struct fmc_device *fmc, int pos, const void *d, int l);
+};
+
+/* Prefer this helper rather than calling of fmc->reprogram directly */
+extern int fmc_reprogram(struct fmc_device *f, struct fmc_driver *d, char *gw,
+ int sdb_entry);
+
+/*
+ * The device reports all information needed to access hw.
+ *
+ * If we have eeprom_len and not contents, the core reads it.
+ * Then, parsing of identifiers is done by the core which fills fmc_fru_id..
+ * Similarly a device that must be matched based on SDB cores must
+ * fill the entry point and the core will scan the bus (FIXME: sdb match)
+ */
+struct fmc_device {
+ unsigned long version;
+ unsigned long flags;
+ struct module *owner; /* char device must pin it */
+ struct fmc_fru_id id; /* for EEPROM-based match */
+ struct fmc_operations *op; /* carrier-provided */
+ int irq; /* according to host bus. 0 == none */
+ int eeprom_len; /* Usually 8kB, may be less */
+ int eeprom_addr; /* 0x50, 0x52 etc */
+ uint8_t *eeprom; /* Full contents or leading part */
+ char *carrier_name; /* "SPEC" or similar, for special use */
+ void *carrier_data; /* "struct spec *" or equivalent */
+ __iomem void *fpga_base; /* May be NULL (Etherbone) */
+ __iomem void *slot_base; /* Set by the driver */
+ struct fmc_device **devarray; /* Allocated by the bus */
+ int slot_id; /* Index in the slot array */
+ int nr_slots; /* Number of slots in this carrier */
+ unsigned long memlen; /* Used for the char device */
+ struct device dev; /* For Linux use */
+ struct device *hwdev; /* The underlying hardware device */
+ unsigned long sdbfs_entry;
+ struct sdb_array *sdb;
+ uint32_t device_id; /* Filled by the device */
+ char *mezzanine_name; /* Defaults to ``fmc'' */
+ void *mezzanine_data;
+};
+#define to_fmc_device(x) container_of((x), struct fmc_device, dev)
+
+#define FMC_DEVICE_HAS_GOLDEN 1
+#define FMC_DEVICE_HAS_CUSTOM 2
+#define FMC_DEVICE_NO_MEZZANINE 4
+#define FMC_DEVICE_MATCH_SDB 8 /* fmc-core must scan sdb in fpga */
+
+/*
+ * If fpga_base can be used, the carrier offers no readl/writel methods, and
+ * this expands to a single, fast, I/O access.
+ */
+static inline uint32_t fmc_readl(struct fmc_device *fmc, int offset)
+{
+ if (unlikely(fmc->op->readl))
+ return fmc->op->readl(fmc, offset);
+ return readl(fmc->fpga_base + offset);
+}
+static inline void fmc_writel(struct fmc_device *fmc, uint32_t val, int off)
+{
+ if (unlikely(fmc->op->writel))
+ fmc->op->writel(fmc, val, off);
+ else
+ writel(val, fmc->fpga_base + off);
+}
+
+/* pci-like naming */
+static inline void *fmc_get_drvdata(const struct fmc_device *fmc)
+{
+ return dev_get_drvdata(&fmc->dev);
+}
+
+static inline void fmc_set_drvdata(struct fmc_device *fmc, void *data)
+{
+ dev_set_drvdata(&fmc->dev, data);
+}
+
+/* The 4 access points */
+extern int fmc_driver_register(struct fmc_driver *drv);
+extern void fmc_driver_unregister(struct fmc_driver *drv);
+extern int fmc_device_register(struct fmc_device *tdev);
+extern void fmc_device_unregister(struct fmc_device *tdev);
+
+/* Two more for device sets, all driven by the same FPGA */
+extern int fmc_device_register_n(struct fmc_device **devs, int n);
+extern void fmc_device_unregister_n(struct fmc_device **devs, int n);
+
+/* Internal cross-calls between files; not exported to other modules */
+extern int fmc_match(struct device *dev, struct device_driver *drv);
+extern int fmc_fill_id_info(struct fmc_device *fmc);
+extern void fmc_free_id_info(struct fmc_device *fmc);
+extern void fmc_dump_eeprom(const struct fmc_device *fmc);
+extern void fmc_dump_sdb(const struct fmc_device *fmc);
+
+#endif /* __LINUX_FMC_H__ */
projects / cascardo / linux.git / blobdiff