* when used with 802.11g (on the 2.4 GHz band); filled by the
* core code when registering the wiphy.
* @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
+ * @IEEE80211_RATE_SUPPORTS_5MHZ: Rate can be used in 5 MHz mode
+ * @IEEE80211_RATE_SUPPORTS_10MHZ: Rate can be used in 10 MHz mode
*/
enum ieee80211_rate_flags {
IEEE80211_RATE_SHORT_PREAMBLE = 1<<0,
IEEE80211_RATE_MANDATORY_B = 1<<2,
IEEE80211_RATE_MANDATORY_G = 1<<3,
IEEE80211_RATE_ERP_G = 1<<4,
+ IEEE80211_RATE_SUPPORTS_5MHZ = 1<<5,
+ IEEE80211_RATE_SUPPORTS_10MHZ = 1<<6,
};
/**
const struct cfg80211_chan_def *chandef,
u32 prohibited_flags);
+/**
+ * ieee80211_chandef_rate_flags - returns rate flags for a channel
+ *
+ * In some channel types, not all rates may be used - for example CCK
+ * rates may not be used in 5/10 MHz channels.
+ *
+ * @chandef: channel definition for the channel
+ *
+ * Returns: rate flags which apply for this channel
+ */
+static inline enum ieee80211_rate_flags
+ieee80211_chandef_rate_flags(struct cfg80211_chan_def *chandef)
+{
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_5:
+ return IEEE80211_RATE_SUPPORTS_5MHZ;
+ case NL80211_CHAN_WIDTH_10:
+ return IEEE80211_RATE_SUPPORTS_10MHZ;
+ default:
+ break;
+ }
+ return 0;
+}
+
/**
* enum survey_info_flags - survey information flags
*
* @STATION_INFO_LOCAL_PM: @local_pm filled
* @STATION_INFO_PEER_PM: @peer_pm filled
* @STATION_INFO_NONPEER_PM: @nonpeer_pm filled
+ * @STATION_INFO_CHAIN_SIGNAL: @chain_signal filled
+ * @STATION_INFO_CHAIN_SIGNAL_AVG: @chain_signal_avg filled
*/
enum station_info_flags {
STATION_INFO_INACTIVE_TIME = 1<<0,
STATION_INFO_NONPEER_PM = 1<<23,
STATION_INFO_RX_BYTES64 = 1<<24,
STATION_INFO_TX_BYTES64 = 1<<25,
+ STATION_INFO_CHAIN_SIGNAL = 1<<26,
+ STATION_INFO_CHAIN_SIGNAL_AVG = 1<<27,
};
/**
u16 beacon_interval;
};
+#define IEEE80211_MAX_CHAINS 4
+
/**
* struct station_info - station information
*
* For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
* @signal_avg: Average signal strength, type depends on the wiphy's signal_type.
* For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
+ * @chains: bitmask for filled values in @chain_signal, @chain_signal_avg
+ * @chain_signal: per-chain signal strength of last received packet in dBm
+ * @chain_signal_avg: per-chain signal strength average in dBm
* @txrate: current unicast bitrate from this station
* @rxrate: current unicast bitrate to this station
* @rx_packets: packets received from this station
u8 plink_state;
s8 signal;
s8 signal_avg;
+
+ u8 chains;
+ s8 chain_signal[IEEE80211_MAX_CHAINS];
+ s8 chain_signal_avg[IEEE80211_MAX_CHAINS];
+
struct rate_info txrate;
struct rate_info rxrate;
u32 rx_packets;
* @MONITOR_FLAG_CONTROL: pass control frames
* @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering
* @MONITOR_FLAG_COOK_FRAMES: report frames after processing
+ * @MONITOR_FLAG_ACTIVE: active monitor, ACKs frames on its MAC address
*/
enum monitor_flags {
MONITOR_FLAG_FCSFAIL = 1<<NL80211_MNTR_FLAG_FCSFAIL,
MONITOR_FLAG_CONTROL = 1<<NL80211_MNTR_FLAG_CONTROL,
MONITOR_FLAG_OTHER_BSS = 1<<NL80211_MNTR_FLAG_OTHER_BSS,
MONITOR_FLAG_COOK_FRAMES = 1<<NL80211_MNTR_FLAG_COOK_FRAMES,
+ MONITOR_FLAG_ACTIVE = 1<<NL80211_MNTR_FLAG_ACTIVE,
};
/**
* setting for new peer links.
* @dot11MeshAwakeWindowDuration: The duration in TUs the STA will remain awake
* after transmitting its beacon.
+ * @plink_timeout: If no tx activity is seen from a STA we've established
+ * peering with for longer than this time (in seconds), then remove it
+ * from the STA's list of peers. Default is 30 minutes.
*/
struct mesh_config {
u16 dot11MeshRetryTimeout;
u16 dot11MeshHWMPconfirmationInterval;
enum nl80211_mesh_power_mode power_mode;
u16 dot11MeshAwakeWindowDuration;
+ u32 plink_timeout;
};
/**
* @sync_method: which synchronization method to use
* @path_sel_proto: which path selection protocol to use
* @path_metric: which metric to use
+ * @auth_id: which authentication method this mesh is using
* @ie: vendor information elements (optional)
* @ie_len: length of vendor information elements
* @is_authenticated: this mesh requires authentication
* @dtim_period: DTIM period to use
* @beacon_interval: beacon interval to use
* @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a]
+ * @basic_rates: basic rates to use when creating the mesh
*
* These parameters are fixed when the mesh is created.
*/
u8 sync_method;
u8 path_sel_proto;
u8 path_metric;
+ u8 auth_id;
const u8 *ie;
u8 ie_len;
bool is_authenticated;
u8 dtim_period;
u16 beacon_interval;
int mcast_rate[IEEE80211_NUM_BANDS];
+ u32 basic_rates;
};
/**
* @scan_start: time (in jiffies) when the scan started
* @wdev: the wireless device to scan for
* @aborted: (internal) scan request was notified as aborted
+ * @notified: (internal) scan request was notified as done or aborted
* @no_cck: used to send probe requests at non CCK rate in 2GHz band
*/
struct cfg80211_scan_request {
/* internal */
struct wiphy *wiphy;
unsigned long scan_start;
- bool aborted;
+ bool aborted, notified;
bool no_cck;
/* keep last */
* This structure provides information needed to complete IEEE 802.11
* authentication.
*
- * @bss: The BSS to authenticate with.
+ * @bss: The BSS to authenticate with, the callee must obtain a reference
+ * to it if it needs to keep it.
* @auth_type: Authentication type (algorithm)
* @ie: Extra IEs to add to Authentication frame or %NULL
* @ie_len: Length of ie buffer in octets
*
* This structure provides information needed to complete IEEE 802.11
* (re)association.
- * @bss: The BSS to associate with. If the call is successful the driver
- * is given a reference that it must release, normally via a call to
- * cfg80211_send_rx_assoc(), or, if association timed out, with a
- * call to cfg80211_put_bss() (in addition to calling
- * cfg80211_send_assoc_timeout())
+ * @bss: The BSS to associate with. If the call is successful the driver is
+ * given a reference that it must give back to cfg80211_send_rx_assoc()
+ * or to cfg80211_assoc_timeout(). To ensure proper refcounting, new
+ * association requests while already associating must be rejected.
* @ie: Extra IEs to add to (Re)Association Request frame or %NULL
* @ie_len: Length of ie buffer in octets
* @use_mfp: Use management frame protection (IEEE 802.11w) in this association
* @get_mpath: get a mesh path for the given parameters
* @dump_mpath: dump mesh path callback -- resume dump at index @idx
* @join_mesh: join the mesh network with the specified parameters
+ * (invoked with the wireless_dev mutex held)
* @leave_mesh: leave the current mesh network
+ * (invoked with the wireless_dev mutex held)
*
* @get_mesh_config: Get the current mesh configuration
*
* the scan/scan_done bracket too.
*
* @auth: Request to authenticate with the specified peer
+ * (invoked with the wireless_dev mutex held)
* @assoc: Request to (re)associate with the specified peer
+ * (invoked with the wireless_dev mutex held)
* @deauth: Request to deauthenticate from the specified peer
+ * (invoked with the wireless_dev mutex held)
* @disassoc: Request to disassociate from the specified peer
+ * (invoked with the wireless_dev mutex held)
*
* @connect: Connect to the ESS with the specified parameters. When connected,
* call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS.
* If the connection fails for some reason, call cfg80211_connect_result()
* with the status from the AP.
+ * (invoked with the wireless_dev mutex held)
* @disconnect: Disconnect from the BSS/ESS.
+ * (invoked with the wireless_dev mutex held)
*
* @join_ibss: Join the specified IBSS (or create if necessary). Once done, call
* cfg80211_ibss_joined(), also call that function when changing BSSID due
* to a merge.
+ * (invoked with the wireless_dev mutex held)
* @leave_ibss: Leave the IBSS.
+ * (invoked with the wireless_dev mutex held)
*
* @set_mcast_rate: Set the specified multicast rate (only if vif is in ADHOC or
* MESH mode)
* responds to probe-requests in hardware.
* @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX.
* @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call.
+ * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels.
*/
enum wiphy_flags {
WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD = BIT(19),
WIPHY_FLAG_OFFCHAN_TX = BIT(20),
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21),
+ WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22),
};
/**
* may request, if implemented.
*
* @wowlan: WoWLAN support information
+ * @wowlan_config: current WoWLAN configuration; this should usually not be
+ * used since access to it is necessarily racy, use the parameter passed
+ * to the suspend() operation instead.
*
* @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features.
* @ht_capa_mod_mask: Specify what ht_cap values can be over-ridden.
u32 hw_version;
#ifdef CONFIG_PM
- struct wiphy_wowlan_support wowlan;
+ const struct wiphy_wowlan_support *wowlan;
+ struct cfg80211_wowlan *wowlan_config;
#endif
u16 max_remain_on_channel_duration;
* @current_bss: (private) Used by the internal configuration code
* @channel: (private) Used by the internal configuration code to track
* the user-set AP, monitor and WDS channel
- * @preset_chan: (private) Used by the internal configuration code to
+ * @preset_chandef: (private) Used by the internal configuration code to
* track the channel to be used for AP later
* @bssid: (private) Used by the internal configuration code
* @ssid: (private) Used by the internal configuration code
* by cfg80211 on change_interface
* @mgmt_registrations: list of registrations for management frames
* @mgmt_registrations_lock: lock for the list
- * @mtx: mutex used to lock data in this struct
- * @cleanup_work: work struct used for cleanup that can't be done directly
+ * @mtx: mutex used to lock data in this struct, may be used by drivers
+ * and some API functions require it held
* @beacon_interval: beacon interval used on this device for transmitting
* beacons, 0 when not valid
* @address: The address for this device, valid only if @netdev is %NULL
* @p2p_started: true if this is a P2P Device that has been started
* @cac_started: true if DFS channel availability check has been started
* @cac_start_time: timestamp (jiffies) when the dfs state was entered.
+ * @ps: powersave mode is enabled
+ * @ps_timeout: dynamic powersave timeout
+ * @ap_unexpected_nlportid: (private) netlink port ID of application
+ * registered for unexpected class 3 frames (AP mode)
+ * @conn: (private) cfg80211 software SME connection state machine data
+ * @connect_keys: (private) keys to set after connection is established
+ * @ibss_fixed: (private) IBSS is using fixed BSSID
+ * @event_list: (private) list for internal event processing
+ * @event_lock: (private) lock for event list
*/
struct wireless_dev {
struct wiphy *wiphy;
struct mutex mtx;
- struct work_struct cleanup_work;
-
bool use_4addr, p2p_started;
u8 address[ETH_ALEN] __aligned(sizeof(u16));
/* currently used for IBSS and SME - might be rearranged later */
u8 ssid[IEEE80211_MAX_SSID_LEN];
u8 ssid_len, mesh_id_len, mesh_id_up_len;
- enum {
- CFG80211_SME_IDLE,
- CFG80211_SME_CONNECTING,
- CFG80211_SME_CONNECTED,
- } sme_state;
struct cfg80211_conn *conn;
struct cfg80211_cached_keys *connect_keys;
ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
u32 basic_rates, int bitrate);
+/**
+ * ieee80211_mandatory_rates - get mandatory rates for a given band
+ * @sband: the band to look for rates in
+ *
+ * This function returns a bitmap of the mandatory rates for the given
+ * band, bits are set according to the rate position in the bitrates array.
+ */
+u32 ieee80211_mandatory_rates(struct ieee80211_supported_band *sband);
+
/*
* Radiotap parsing functions -- for controlled injection support
*
void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
/**
- * cfg80211_send_rx_auth - notification of processed authentication
+ * cfg80211_rx_mlme_mgmt - notification of processed MLME management frame
* @dev: network device
* @buf: authentication frame (header + body)
* @len: length of the frame data
*
- * This function is called whenever an authentication has been processed in
- * station mode. The driver is required to call either this function or
- * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth()
- * call. This function may sleep.
+ * This function is called whenever an authentication, disassociation or
+ * deauthentication frame has been received and processed in station mode.
+ * After being asked to authenticate via cfg80211_ops::auth() the driver must
+ * call either this function or cfg80211_auth_timeout().
+ * After being asked to associate via cfg80211_ops::assoc() the driver must
+ * call either this function or cfg80211_auth_timeout().
+ * While connected, the driver must calls this for received and processed
+ * disassociation and deauthentication frames. If the frame couldn't be used
+ * because it was unprotected, the driver must call the function
+ * cfg80211_rx_unprot_mlme_mgmt() instead.
+ *
+ * This function may sleep. The caller must hold the corresponding wdev's mutex.
*/
-void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
+void cfg80211_rx_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len);
/**
- * cfg80211_send_auth_timeout - notification of timed out authentication
+ * cfg80211_auth_timeout - notification of timed out authentication
* @dev: network device
* @addr: The MAC address of the device with which the authentication timed out
*
- * This function may sleep.
+ * This function may sleep. The caller must hold the corresponding wdev's
+ * mutex.
*/
-void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
+void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr);
/**
- * cfg80211_send_rx_assoc - notification of processed association
+ * cfg80211_rx_assoc_resp - notification of processed association response
* @dev: network device
- * @bss: the BSS struct association was requested for, the struct reference
- * is owned by cfg80211 after this call
- * @buf: (re)association response frame (header + body)
+ * @bss: the BSS that association was requested with, ownership of the pointer
+ * moves to cfg80211 in this call
+ * @buf: authentication frame (header + body)
* @len: length of the frame data
*
- * This function is called whenever a (re)association response has been
- * processed in station mode. The driver is required to call either this
- * function or cfg80211_send_assoc_timeout() to indicate the result of
- * cfg80211_ops::assoc() call. This function may sleep.
+ * After being asked to associate via cfg80211_ops::assoc() the driver must
+ * call either this function or cfg80211_auth_timeout().
+ *
+ * This function may sleep. The caller must hold the corresponding wdev's mutex.
*/
-void cfg80211_send_rx_assoc(struct net_device *dev, struct cfg80211_bss *bss,
+void cfg80211_rx_assoc_resp(struct net_device *dev,
+ struct cfg80211_bss *bss,
const u8 *buf, size_t len);
/**
- * cfg80211_send_assoc_timeout - notification of timed out association
+ * cfg80211_assoc_timeout - notification of timed out association
* @dev: network device
- * @addr: The MAC address of the device with which the association timed out
+ * @bss: The BSS entry with which association timed out.
*
- * This function may sleep.
+ * This function may sleep. The caller must hold the corresponding wdev's mutex.
*/
-void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
+void cfg80211_assoc_timeout(struct net_device *dev, struct cfg80211_bss *bss);
/**
- * cfg80211_send_deauth - notification of processed deauthentication
+ * cfg80211_tx_mlme_mgmt - notification of transmitted deauth/disassoc frame
* @dev: network device
- * @buf: deauthentication frame (header + body)
+ * @buf: 802.11 frame (header + body)
* @len: length of the frame data
*
* This function is called whenever deauthentication has been processed in
* station mode. This includes both received deauthentication frames and
- * locally generated ones. This function may sleep.
- */
-void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
-
-/**
- * __cfg80211_send_deauth - notification of processed deauthentication
- * @dev: network device
- * @buf: deauthentication frame (header + body)
- * @len: length of the frame data
- *
- * Like cfg80211_send_deauth(), but doesn't take the wdev lock.
- */
-void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
-
-/**
- * cfg80211_send_disassoc - notification of processed disassociation
- * @dev: network device
- * @buf: disassociation response frame (header + body)
- * @len: length of the frame data
- *
- * This function is called whenever disassociation has been processed in
- * station mode. This includes both received disassociation frames and locally
- * generated ones. This function may sleep.
- */
-void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len);
-
-/**
- * __cfg80211_send_disassoc - notification of processed disassociation
- * @dev: network device
- * @buf: disassociation response frame (header + body)
- * @len: length of the frame data
- *
- * Like cfg80211_send_disassoc(), but doesn't take the wdev lock.
+ * locally generated ones. This function may sleep. The caller must hold the
+ * corresponding wdev's mutex.
*/
-void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf,
- size_t len);
+void cfg80211_tx_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len);
/**
- * cfg80211_send_unprot_deauth - notification of unprotected deauthentication
+ * cfg80211_rx_unprot_mlme_mgmt - notification of unprotected mlme mgmt frame
* @dev: network device
* @buf: deauthentication frame (header + body)
* @len: length of the frame data
*
- * This function is called whenever a received Deauthentication frame has been
- * dropped in station mode because of MFP being used but the Deauthentication
+ * This function is called whenever a received deauthentication or dissassoc
+ * frame has been dropped in station mode because of MFP being used but the
* frame was not protected. This function may sleep.
*/
-void cfg80211_send_unprot_deauth(struct net_device *dev, const u8 *buf,
- size_t len);
-
-/**
- * cfg80211_send_unprot_disassoc - notification of unprotected disassociation
- * @dev: network device
- * @buf: disassociation frame (header + body)
- * @len: length of the frame data
- *
- * This function is called whenever a received Disassociation frame has been
- * dropped in station mode because of MFP being used but the Disassociation
- * frame was not protected. This function may sleep.
- */
-void cfg80211_send_unprot_disassoc(struct net_device *dev, const u8 *buf,
- size_t len);
+void cfg80211_rx_unprot_mlme_mgmt(struct net_device *dev,
+ const u8 *buf, size_t len);
/**
* cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP)
* cfg80211_crit_proto_stopped() - indicate critical protocol stopped by driver.
*
* @wdev: the wireless device for which critical protocol is stopped.
+ * @gfp: allocation flags
*
* This function can be called by the driver to indicate it has reverted
* operation back to normal. One reason could be that the duration given
projects / cascardo / linux.git / blobdiff