* when used with 802.11g (on the 2.4 GHz band); filled by the
* core code when registering the wiphy.
* @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
+ * @IEEE80211_RATE_SUPPORTS_5MHZ: Rate can be used in 5 MHz mode
+ * @IEEE80211_RATE_SUPPORTS_10MHZ: Rate can be used in 10 MHz mode
*/
enum ieee80211_rate_flags {
IEEE80211_RATE_SHORT_PREAMBLE = 1<<0,
IEEE80211_RATE_MANDATORY_B = 1<<2,
IEEE80211_RATE_MANDATORY_G = 1<<3,
IEEE80211_RATE_ERP_G = 1<<4,
+ IEEE80211_RATE_SUPPORTS_5MHZ = 1<<5,
+ IEEE80211_RATE_SUPPORTS_10MHZ = 1<<6,
};
/**
const struct cfg80211_chan_def *chandef,
u32 prohibited_flags);
+/**
+ * ieee80211_chandef_rate_flags - returns rate flags for a channel
+ *
+ * In some channel types, not all rates may be used - for example CCK
+ * rates may not be used in 5/10 MHz channels.
+ *
+ * @chandef: channel definition for the channel
+ *
+ * Returns: rate flags which apply for this channel
+ */
+static inline enum ieee80211_rate_flags
+ieee80211_chandef_rate_flags(struct cfg80211_chan_def *chandef)
+{
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_5:
+ return IEEE80211_RATE_SUPPORTS_5MHZ;
+ case NL80211_CHAN_WIDTH_10:
+ return IEEE80211_RATE_SUPPORTS_10MHZ;
+ default:
+ break;
+ }
+ return 0;
+}
+
/**
* enum survey_info_flags - survey information flags
*
* setting for new peer links.
* @dot11MeshAwakeWindowDuration: The duration in TUs the STA will remain awake
* after transmitting its beacon.
+ * @plink_timeout: If no tx activity is seen from a STA we've established
+ * peering with for longer than this time (in seconds), then remove it
+ * from the STA's list of peers. Default is 30 minutes.
*/
struct mesh_config {
u16 dot11MeshRetryTimeout;
u16 dot11MeshHWMPconfirmationInterval;
enum nl80211_mesh_power_mode power_mode;
u16 dot11MeshAwakeWindowDuration;
+ u32 plink_timeout;
};
/**
* @dtim_period: DTIM period to use
* @beacon_interval: beacon interval to use
* @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a]
+ * @basic_rates: basic rates to use when creating the mesh
*
* These parameters are fixed when the mesh is created.
*/
u8 dtim_period;
u16 beacon_interval;
int mcast_rate[IEEE80211_NUM_BANDS];
+ u32 basic_rates;
};
/**
* This structure provides information needed to complete IEEE 802.11
* authentication.
*
- * @bss: The BSS to authenticate with.
+ * @bss: The BSS to authenticate with, the callee must obtain a reference
+ * to it if it needs to keep it.
* @auth_type: Authentication type (algorithm)
* @ie: Extra IEs to add to Authentication frame or %NULL
* @ie_len: Length of ie buffer in octets
*
* This structure provides information needed to complete IEEE 802.11
* (re)association.
- * @bss: The BSS to associate with. If the call is successful the driver
- * is given a reference that it must release, normally via a call to
- * cfg80211_send_rx_assoc(), or, if association timed out, with a
- * call to cfg80211_put_bss() (in addition to calling
- * cfg80211_send_assoc_timeout())
+ * @bss: The BSS to associate with. If the call is successful the driver is
+ * given a reference that it must give back to cfg80211_send_rx_assoc()
+ * or to cfg80211_assoc_timeout(). To ensure proper refcounting, new
+ * association requests while already associating must be rejected.
* @ie: Extra IEs to add to (Re)Association Request frame or %NULL
* @ie_len: Length of ie buffer in octets
* @use_mfp: Use management frame protection (IEEE 802.11w) in this association
* responds to probe-requests in hardware.
* @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX.
* @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call.
+ * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels.
*/
enum wiphy_flags {
WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD = BIT(19),
WIPHY_FLAG_OFFCHAN_TX = BIT(20),
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21),
+ WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22),
};
/**
/**
* cfg80211_assoc_timeout - notification of timed out association
* @dev: network device
- * @addr: The MAC address of the device with which the association timed out
+ * @bss: The BSS entry with which association timed out.
*
* This function may sleep. The caller must hold the corresponding wdev's mutex.
*/
-void cfg80211_assoc_timeout(struct net_device *dev, const u8 *addr);
+void cfg80211_assoc_timeout(struct net_device *dev, struct cfg80211_bss *bss);
/**
* cfg80211_tx_mlme_mgmt - notification of transmitted deauth/disassoc frame